anyone using scat bellcrank linkage

superbtl · Samba Member Joined: March 03, 2005 Posts: 687

is anyone using this linkage. my hex linkage seized up and broke when i tried to loosen it so now im in the market for a new one

TWD · Posted: Mon May 05, 2008 2:39 pm Post subject:

What carbs?
I have a couple sets that I used on Kadrons and 35 PDSITs. They work fine. However, I prefer the ones from CSP.

jbbugs · Posted: Mon May 05, 2008 3:21 pm Post subject:

I've used a bunch of the Scat center-pull linkages. They work great for the money. Just make sure you adjust them AFTER the motor is fully warmed up. You'll need to run a return spring of your own, as it doesn't really address the fact that it needs one.
Paul
_________________
Drag bus! http://www.youtube.com/watch?v=s2MOVmKdhX4

69 OG paint Transporter
73' Super Beetle Champcar Endurance Roadracer
Patina my ass, that's a Rust Bucket!

superbtl · Samba Member Joined: March 03, 2005 Posts: 687

im running it on dual 44 webers. are there any hidden secrect or tricks when putting them on

jbbugs · Posted: Tue May 06, 2008 5:42 pm Post subject:

Sometimes you have to grind the little support piece that bolts to the lower alternator backing plate bolt to clearance the linkage rod.And you may have to use a longer 6mm bolt on that with a spacer. They won't tell you that in the instructions. It's still a nice linkage for as cheap as it is.
Paul
_________________
Drag bus! http://www.youtube.com/watch?v=s2MOVmKdhX4

69 OG paint Transporter
73' Super Beetle Champcar Endurance Roadracer
Patina my ass, that's a Rust Bucket!


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

Forum Index -> Performance/Engines/Transmissions		Share:
		Print View

	Forum Index -> Performance/Engines/Transmissions	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1