Author |
Message |
JDGas Samba Member
Joined: June 23, 2004 Posts: 1233 Location: Escondido
|
|
Back to top |
|
|
vwrabbitjunkie Samba Member
Joined: October 01, 2006 Posts: 112 Location: Gilbert, AZ
|
Posted: Wed Jun 06, 2012 7:02 pm Post subject: |
|
|
So they are ET's then. Good to know. _________________ You either love the utilitarian approach the VW engineers had in the earlier days, or you don't. If you don't. . . buy a Honda. |
|
Back to top |
|
|
Mike Fisher Samba Member
Joined: January 30, 2006 Posts: 17968 Location: Eugene, OR
|
Posted: Thu Jun 07, 2012 7:32 am Post subject: |
|
|
I had aluminum & magnesium Torque Thrusts and they were both one piece wheels. _________________ https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold
Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey |
|
Back to top |
|
|
ingenbremser Samba Member
Joined: September 11, 2008 Posts: 197 Location: Gjøvik, Norway
|
Posted: Sat Jun 30, 2012 3:50 pm Post subject: |
|
|
my old 52 split, cal parts wheels , and 4 inch narrowed in front
_________________ 52 split |
|
Back to top |
|
|
vaughn bros. Samba Member
Joined: October 13, 2003 Posts: 2395 Location: Hickory, NC
|
Posted: Tue Jul 03, 2012 5:36 pm Post subject: |
|
|
ingenbremser wrote: |
my old 52 split, cal parts wheels , and 4 inch narrowed in front
|
Why cant we see more? What type and size lugs did you use? Drum brakes? You cant just post a calparts teaser pic and run away. Wheres a moderator when you need one. |
|
Back to top |
|
|
Modifiedbrian Samba Member
Joined: January 13, 2011 Posts: 9 Location: United kingdom
|
Posted: Sun Jul 08, 2012 3:29 pm Post subject: Replacement Cal Parts for my westy |
|
|
Here's an update on my Cal Parts Westy
Here's what happened at a local tyre fitting depot last month
And the hole in the roof where the other half of the wheel went, when they were trying to sit the tyre.
Here's some pics of my new Cal Parts picked up from the Samba, delivered Friday. Started to clean them up
Old and new
Check out how much the old ones have been machined down in the past
Can anyone help with some DIY home tips on buffing up the rims more without a visit to a professional.
Cheers Brian Hi Jake!!! |
|
Back to top |
|
|
vaughn bros. Samba Member
Joined: October 13, 2003 Posts: 2395 Location: Hickory, NC
|
Posted: Sun Jul 08, 2012 4:48 pm Post subject: Re: Replacement Cal Parts for my westy |
|
|
Modifiedbrian wrote: |
Old and new
|
If I am correct, the one on the left is not a calpart (2 piece). The wheel on the right is a calpart (one piece). |
|
Back to top |
|
|
Modifiedbrian Samba Member
Joined: January 13, 2011 Posts: 9 Location: United kingdom
|
Posted: Sun Jul 08, 2012 4:56 pm Post subject: |
|
|
Nah this is a 2 piece Cal Part that needs some TLC
Laters |
|
Back to top |
|
|
ratlookvw Samba Member
Joined: June 21, 2004 Posts: 1809 Location: midnight train to GA
|
Posted: Mon Jul 09, 2012 6:20 pm Post subject: |
|
|
Modifiedbrian wrote: |
Nah this is a 2 piece Cal Part that needs some TLC
Laters |
I am sure that kinky mick would like to have that half for a best of trophy. C _________________ If the RV Hut is a rockin, don't come a knockn'
57 Panel, 66 highroof panel, 65 Notch, 59 Vert, 61 Vert, 1969 Fridolin, 'Reggie ' 66 RV, 65 Pipe Truck, 65 RHD T-34, 70 dbl slider panel, 1969 Deep sea green sunroof automatic square, the greypoop-on, and a shit load of wheels! |
|
Back to top |
|
|
vaughn bros. Samba Member
Joined: October 13, 2003 Posts: 2395 Location: Hickory, NC
|
Posted: Fri Jul 13, 2012 8:29 am Post subject: Re: Replacement Cal Parts for my westy |
|
|
vaughn bros. wrote: |
Modifiedbrian wrote: |
Old and new
|
If I am correct, the one on the left is not a calpart (2 piece). The wheel on the right is a calpart (one piece). |
Sorry, I based it on the little relief pointed out in this pic.
The one on the left has no relief area and yours does. My Calparts also have the relief area. This picture shows one of my 2 piece on left and my calpart on right. There were a handful of makers of this style of wheel.
I am curious if your broken 2 piece wheel says calpart co., on the backside? |
|
Back to top |
|
|
Modifiedbrian Samba Member
Joined: January 13, 2011 Posts: 9 Location: United kingdom
|
Posted: Mon Jul 16, 2012 5:41 am Post subject: |
|
|
The relief point your talking about is the there on that wheel, its just that in the past that particular has been heavily machined to repair the face??
So before fitting these new wheels had to get the bolt holes drilled out to match my mag nuts
Standard the holes are 14mm but I had to get them machined out to 17.5mm.
[IMG]
Still not sure what caps to go with, whether to retain the original ally caps or put the super ET's i already had.
So here we are with the westy finally back on cal parts
|
|
Back to top |
|
|
vaughn bros. Samba Member
Joined: October 13, 2003 Posts: 2395 Location: Hickory, NC
|
Posted: Mon Jul 16, 2012 6:13 am Post subject: |
|
|
[quote="Modifiedbrian"]
Fuck me thats wild as hell looking. |
|
Back to top |
|
|
JDGas Samba Member
Joined: June 23, 2004 Posts: 1233 Location: Escondido
|
|
Back to top |
|
|
JDGas Samba Member
Joined: June 23, 2004 Posts: 1233 Location: Escondido
|
Posted: Mon Jul 16, 2012 10:10 pm Post subject: |
|
|
[quote="vaughn bros."]
Modifiedbrian wrote: |
Fuck me thats wild as hell looking. |
Brian, Thanks for the pics yesterday morning, bus looks good.
I was going to email you last night about a pair of Cal Parts that were for sale at Hot VW's Drag Day. There was a pair and the old dude wanted $500 a piece!! Luckily he is from my area, so I will keep eyes on them and try to beat him up on the price so we can complete your original set again. _________________ 1959 Ragtop Beetle - sold
1958 Danish Beetle
1967 SO-42 West. - sold
1961 Sunroof Beetle - sold
1969 Sunroof Beetle |
|
Back to top |
|
|
JDGas Samba Member
Joined: June 23, 2004 Posts: 1233 Location: Escondido
|
|
Back to top |
|
|
Modifiedbrian Samba Member
Joined: January 13, 2011 Posts: 9 Location: United kingdom
|
Posted: Tue Jul 17, 2012 12:30 am Post subject: |
|
|
Typically, after buying the set of wheels I came across a guy who had a lock up in riverside and had 9 cal part wheels. He has said he's happy to part with one when I get some more cash.
On reflection I'm really happy t went for this set of wheels, but I will buy another wheel so that I have a complete spare set. At least now I have a spare wheel I can actually use.
So 4 weeks ago I went to get a new set of tyres which then lead to
Tyres £250
Cal part wheels £1000 ish
Import tax £250
new rear hubs & brakes £100
All new mag studs, washers & nuts £150
Temporary front wheels, spacers & bolts £150
Machine work on wheels £200
Switching tyres over £70
About £2,200 that didn't really have on my bus.
I've come to the conclusion that I shouldn't be pro-active with my bus as it always bites me in the ass.
Keep in touch Jake about those wheels. |
|
Back to top |
|
|
vaughn bros. Samba Member
Joined: October 13, 2003 Posts: 2395 Location: Hickory, NC
|
Posted: Fri Sep 27, 2013 2:52 pm Post subject: |
|
|
670-15 and Cal Part's, rear.
|
|
Back to top |
|
|
ratherb-buggin Samba Member
Joined: January 30, 2005 Posts: 985 Location: Shawnee, KS
|
Posted: Sun Nov 03, 2013 7:19 am Post subject: |
|
|
What lug nut / lug bolt torque specs are people going by? I have a set of torque thrust replicas on my bus and can't find any torque specifications. I am running lug bolts. |
|
Back to top |
|
|
Long-roofs Samba Member
Joined: March 20, 2002 Posts: 2295 Location: Millwood, Wa
|
Posted: Sun Mar 02, 2014 3:50 pm Post subject: |
|
|
My Cal-Parts have aluminum center caps, 3 of 4 do, anyone know if they are original?
_________________ ---
I have been on a treadmill drinking vodka, maybe more than once.
"No, I do not own a bleepin' leaf blower"
-- |
|
Back to top |
|
|
vaughn bros. Samba Member
Joined: October 13, 2003 Posts: 2395 Location: Hickory, NC
|
Posted: Sun Mar 02, 2014 7:04 pm Post subject: |
|
|
Long-roofs wrote: |
My Cal-Parts have aluminum center caps, 3 of 4 do, anyone know if they are original?
|
Yep, thats the original style center cap. Very fragile and they corrode easy. |
|
Back to top |
|
|
|