Adapt your Torque Meister to 1 1/2 Gland Nut

[TroyG]

OK Guys here is how you do it.
Take a 1 1/2 socket ( OLD )
Take a old 36mm gland nut
Cut all the streads off the old gland nut and weld it to the socket.
When you are putting the Mister on the crank, turn it around so the short side is to the flywheel, insert the 36mm gland nut with the socket on it into the mister and torque it down.
SIMPLE , CHEAP , EASY
If you are in the Dallas area and you need your 1 1/2 Gland nut installed give me a call ( It's Free )
BTW NO smart a-- remarks about my welding ( I had a bad day )
http://www.reliablevdub.com/




_________________
http://www.reliablevdub.com/
Come and visit VolksTalk.com
at
http://www.volkstalk.com/

[blue77bay]

welding is fine but straight would have been nice