Author |
Message |
virtanen Samba Member
Joined: January 08, 2006 Posts: 1461 Location: Finland
|
|
Back to top |
|
|
palmgreen57 Samba Member
Joined: July 05, 2007 Posts: 370 Location: france
|
Posted: Sun Dec 07, 2014 2:35 pm Post subject: |
|
|
Hi
here some update of this week end
I fitted and cleaned the OG oïl reflector, fitted it as shown on the vw manual, but don't know how far to go ? I push as much as I could but not sure is it enough ? does somebody knows ????
I also finished to assemblate the heater box and shoes box set, try to do it as it was originaly with small pin and washer
Last edited by palmgreen57 on Tue Dec 16, 2014 12:54 pm; edited 5 times in total |
|
Back to top |
|
|
palmgreen57 Samba Member
Joined: July 05, 2007 Posts: 370 Location: france
|
Posted: Sun Dec 07, 2014 2:40 pm Post subject: |
|
|
other job of this week end :
take all the rust out of the air intake manifold, it was not easy, 2 hours of work and finally did it with 3 bike cables brake as this :
|
|
Back to top |
|
|
palmgreen57 Samba Member
Joined: July 05, 2007 Posts: 370 Location: france
|
Posted: Tue Dec 16, 2014 12:52 pm Post subject: |
|
|
Hi, now the cylinders wheels have been opened and cleaned , now they are ready to be mounted :
|
|
Back to top |
|
|
palmgreen57 Samba Member
Joined: July 05, 2007 Posts: 370 Location: france
|
Posted: Tue Dec 16, 2014 12:55 pm Post subject: |
|
|
nobody can confirm me the position if oil reflector ? how much deep it has to go ?
|
|
Back to top |
|
|
Schwing Samba Member
Joined: May 10, 2009 Posts: 2506 Location: Centreville, MD
|
|
Back to top |
|
|
palmgreen57 Samba Member
Joined: July 05, 2007 Posts: 370 Location: france
|
Posted: Tue Dec 16, 2014 1:22 pm Post subject: |
|
|
thanks, but it seems to be a different way that this one
which one to follow
|
|
Back to top |
|
|
palmgreen57 Samba Member
Joined: July 05, 2007 Posts: 370 Location: france
|
Posted: Fri Dec 26, 2014 2:10 pm Post subject: |
|
|
somebody could confirm which way is the good one
thx |
|
Back to top |
|
|
palmgreen57 Samba Member
Joined: July 05, 2007 Posts: 370 Location: france
|
Posted: Sun Jan 18, 2015 1:29 pm Post subject: |
|
|
Hi
what would be the good way for the oïl reflector ? nobody
the distributor is now rebuilt thank you for the help, here the pictures :
|
|
Back to top |
|
|
Lazaa Samba Member
Joined: January 03, 2011 Posts: 228 Location: Voiron, France
|
Posted: Mon Jan 19, 2015 4:48 am Post subject: |
|
|
Well done Yann, nice stuff |
|
Back to top |
|
|
palmgreen57 Samba Member
Joined: July 05, 2007 Posts: 370 Location: france
|
Posted: Fri Jan 30, 2015 4:34 am Post subject: |
|
|
Hi
here the picture of the gear box, it was fully checked up :
new bearing, gaskets, changed some damaged parts,
now it's like new, will put more pics when reassemblated
for the oil reflector I'll finally turn it 180° as shown on WW website
|
|
Back to top |
|
|
palmgreen57 Samba Member
Joined: July 05, 2007 Posts: 370 Location: france
|
Posted: Mon Feb 09, 2015 11:13 am Post subject: |
|
|
Hi
I'm looking for a way to get the same render as NOS parts, it seems to be like a wax , I bought some Brown 3M wax in aerosol can ( ref 08901 )
the render is nice but the problem is that wax doesn't become enough dry
What do you use to protect parts like cylinder wheel ? does there is a process to get the same render ass NOS parts ?
thank
|
|
Back to top |
|
|
Peter_N Samba Member
Joined: February 19, 2014 Posts: 321 Location: The Netherlands
|
|
Back to top |
|
|
palmgreen57 Samba Member
Joined: July 05, 2007 Posts: 370 Location: france
|
Posted: Fri Dec 02, 2016 12:20 am Post subject: Re: Oval 53 from Belgium |
|
|
Hi everybody
After almost 2 years of sleeping I'm back to finish my 53, tomorrow the oval is going to a friend workshop...
My goal would be to have the 53 on the road for Ninove 2017 as a test drive and 100% ready to HO 2017 !
I'll need these parts to have a car 100% complete and original :
- pair of 4 bolts front 19mm cylinders wheel, NOS or in good used condition
- pair of front headlight bucket ( split bug style ) original if I can get it cutted on a non usable fender or brand new if someone knows where I could find it
I need it because unfortunetly the previous owner has cut it to slam the car, so I'm very sad with it
- rear apron inner metal part, NOS or good used condition, brand new too
So, if someone could help me with it
I'll update this thread soon with fresh pictures
Yan |
|
Back to top |
|
|
beetlekey Samba Member
Joined: June 06, 2004 Posts: 633 Location: MINDEN
|
Posted: Fri Dec 02, 2016 8:11 am Post subject: Re: Oval 53 from Belgium |
|
|
palmgreen57 wrote: |
Hi everybody
After almost 2 years of sleeping I'm back to finish my 53, tomorrow the oval is going to a friend workshop...
My goal would be to have the 53 on the road for Ninove 2017 as a test drive and 100% ready to HO 2017 !
I'll need these parts to have a car 100% complete and original :
- pair of 4 bolts front 19mm cylinders wheel, NOS or in good used condition
- pair of front headlight bucket ( split bug style ) original if I can get it cutted on a non usable fender or brand new if someone knows where I could find it
I need it because unfortunetly the previous owner has cut it to slam the car, so I'm very sad with it
- rear apron inner metal part, NOS or good used condition, brand new too
So, if someone could help me with it
I'll update this thread soon with fresh pictures
Yan |
Come and visit my shop at HO17, i must see all the details. I have a metallblue 11G _________________ Hebmüller 581
1953 oval Typ 11G metalblue
1966 1300
If you are searching for vintage keys, look here:
https://www.facebook.com/WagenmanufakturHO |
|
Back to top |
|
|
RadojewskiPierre Samba Member
Joined: January 26, 2013 Posts: 43 Location: france
|
Posted: Sat Dec 03, 2016 1:57 pm Post subject: Re: Oval 53 from Belgium |
|
|
Hi,
Mission of the day done !
We have dogged out man's 53 from his garage and she is now at my workshop, she is now with his sister my early 55 vert, ready to work on
tomorrow we separate the body from the pan
enjoy !!!
|
|
Back to top |
|
|
flyingfafa Samba Member
Joined: March 23, 2014 Posts: 12 Location: 91 France
|
Posted: Sun Dec 04, 2016 1:37 am Post subject: Re: Oval 53 from Belgium |
|
|
Awesome and magnifique! |
|
Back to top |
|
|
wurd Samba Member
Joined: March 24, 2014 Posts: 37 Location: France
|
Posted: Sun Dec 04, 2016 10:41 am Post subject: Re: Oval 53 from Belgium |
|
|
Hi,
I don't have this oil reflector in my 57 engine.
What is the interrest to have it? |
|
Back to top |
|
|
RadojewskiPierre Samba Member
Joined: January 26, 2013 Posts: 43 Location: france
|
Posted: Sun Dec 04, 2016 1:51 pm Post subject: Re: Oval 53 from Belgium |
|
|
|
|
Back to top |
|
|
palmgreen57 Samba Member
Joined: July 05, 2007 Posts: 370 Location: france
|
Posted: Sun Dec 04, 2016 11:30 pm Post subject: Re: Oval 53 from Belgium |
|
|
wurd wrote: |
Hi,
I don't have this oil reflector in my 57 engine.
What is the interrest to have it? |
Hi,
I think the reply is in your question, this part prevent the oil spraying out of the engine under the dynamo...
maybe someone else could confirm it
Yan |
|
Back to top |
|
|
|