Author |
Message |
vw donvieira Samba Member
Joined: May 11, 2004 Posts: 617 Location: stockton, California
|
Posted: Sat Dec 26, 2009 10:06 am Post subject: Ball joint/triling arm shop |
|
|
My search is not going well so I am posting. Looking for a reputable shop I can send my trailing arms to as I already have the ball joints. Hopefully a shop in California area can do, but I do not mind sending out fo state if need be. Thanks, vwdon |
|
Back to top |
|
|
SGKent Samba Member
Joined: October 30, 2007 Posts: 41031 Location: Citrus Heights CA (Near Sacramento)
|
Posted: Sat Dec 26, 2009 5:51 pm Post subject: |
|
|
you say "trailing arms" Could you be more specific? If you are refering to torsion arms and ball joints, the shops here in the Sacramento area don't want anything to do with them. They buy rebuilt units from BusBoys or Wolfang International, both in Redding. You could call and see if they will do yours, Wolfgang would not do mine so I had to swap them. Scott at German Supply in Canada will do them if you are willing to allow the turn around time due to postage. _________________ “Most people don’t know what they’re doing, and a lot of them are really good at it.” - George Carlin |
|
Back to top |
|
|
Mountain Minstrel Samba Member
Joined: September 03, 2009 Posts: 979 Location: Sonora, CA
|
Posted: Sat Dec 26, 2009 7:26 pm Post subject: |
|
|
I just had my local shop install a set for me. I bought the Ball Joints from them too, so I do not know if they will install yours or not but...
Speed Unlimited in Clovis (Fresno). _________________ Ken
69 Westy
99 S-10
04 Miata (Sold)
Desertbusman wrote: |
Maintenance doesn't mean repairing it when it breaks. That's called repair. |
miniman82 wrote: |
Don't listen to him, people from Fresno are retarded. |
|
|
Back to top |
|
|
vw donvieira Samba Member
Joined: May 11, 2004 Posts: 617 Location: stockton, California
|
Posted: Sun Dec 27, 2009 2:44 pm Post subject: |
|
|
Thanks. Yes I meant torsion arms. vwdon |
|
Back to top |
|
|
vw donvieira Samba Member
Joined: May 11, 2004 Posts: 617 Location: stockton, California
|
Posted: Sun Dec 27, 2009 4:09 pm Post subject: |
|
|
how do I get in contact with Scott at German supply? Thanks, vwdon |
|
Back to top |
|
|
Desertbusman Samba Member
Joined: June 03, 2005 Posts: 14655 Location: Arizona
|
Posted: Sun Dec 27, 2009 4:13 pm Post subject: |
|
|
Germansupply.com will do it. _________________ 71 Superbug
71 Westy |
|
Back to top |
|
|
|