Author |
Message |
japtrap Samba Member
Joined: April 14, 2010 Posts: 12 Location: reno nevada
|
Posted: Wed Apr 14, 2010 7:54 pm Post subject: newbie (face palm) lol |
|
|
so i just got a 1970 bug 1600sp and i did all my maintence to it and now i want to mod it. i have automotive experience i just came over from the honda world i got over it. lol i want to build this bug to beat my buddys 91 integra with z b20 vtec in it/ (roughly 170ish whp) i was gonna start with heads, dual carbs (weber 40s), upgraded dizzy, Camshaft (Valve Lift .539 310 Duration .385 Cam Lift. 1.4:1), and a new exhaust with a stinger. will this do the trick to beat his car...will it be reliable. is this a good start. eventually i was gonna bore it out but i wanted to try modding the 1600 first so i could get used to it. thanks in advanced |
|
Back to top |
|
|
japtrap Samba Member
Joined: April 14, 2010 Posts: 12 Location: reno nevada
|
Posted: Wed Apr 14, 2010 8:15 pm Post subject: |
|
|
oh and also i was gonna have a 2100lbs clutch plate and clutcc too put the power to the wheels.
bump it up someone help me out |
|
Back to top |
|
|
doc1369 Samba Member
Joined: March 31, 2010 Posts: 2859 Location: Las Vegas, NV, again
|
Posted: Wed Apr 14, 2010 8:19 pm Post subject: |
|
|
My suggestion would be to ditch the 16 and head right to a larger mill. Probably save money in the end. |
|
Back to top |
|
|
PanchoVilla619 Samba Member
Joined: February 12, 2010 Posts: 35 Location: Az
|
Posted: Wed Apr 14, 2010 8:21 pm Post subject: |
|
|
they will also tell you to upgrade your brakes too.... |
|
Back to top |
|
|
mos Samba Member
Joined: January 24, 2010 Posts: 219 Location: location location, ventura CA
|
Posted: Wed Apr 14, 2010 8:25 pm Post subject: |
|
|
im in the mr2 world, and we drive slow cars, if u want power out of a mr2 your going to have to buy alot of parts and put in alot of work, its sort of the same thing with vw (from what i hear anyways) to get any ammount of power it takes alot, sounds like you have all you need though.
and if like with mr2's if thats not enough get a turbo or just swap in some other motor |
|
Back to top |
|
|
rustfree1967bug Samba Member
Joined: November 16, 2006 Posts: 3436 Location: minnesota
|
Posted: Wed Apr 14, 2010 8:27 pm Post subject: |
|
|
Plan on a 2275 with dual 44 idfs or 40 dellorto's. 9:0 compression 1 5/8 exhaust system, fk-8 cam, 40x35.5 valve heads with some good port work. That would be a good start and should put out 140-150 depending on carbs and heads. But it won't be cheap _________________ '70 ghia
'69 ghia
'65 singlecab
'66 sunroof beetle
'74 bus
'67 so-42
IDA's...well... they talk dirty -MURZI |
|
Back to top |
|
|
LeviMan2001 Samba Post Whore
Joined: April 11, 2009 Posts: 3855 Location: Alaska
|
Posted: Wed Apr 14, 2010 8:53 pm Post subject: |
|
|
japtrap wrote: |
oh and also i was gonna have a 2100lbs clutch plate and clutcc too put the power to the wheels.
bump it up someone help me out |
Bigger clutch should be further down the list. If anything, keep the stock clutch so you don't blow up the tranny.
And while you're in there changing the camshaft, you might as well get bigger jugs. And stroke it. haha _________________ http://www.thesamba.com/vw/forum/viewtopic.php?t=366056 - My '73 Super Build. 2332cc, 16" Fuchs |
|
Back to top |
|
|
lupin..the..3rd Samba Member
Joined: December 28, 2009 Posts: 1800
|
Posted: Wed Apr 14, 2010 10:18 pm Post subject: Re: newbie (face palm) lol |
|
|
japtrap wrote: |
so i just got a 1970 bug 1600sp and i did all my maintence to it and now i want to mod it. i have automotive experience i just came over from the honda world i got over it. lol i want to build this bug to beat my buddys 91 integra with z b20 vtec in it/ (roughly 170ish whp) i was gonna start with heads, dual carbs (weber 40s), upgraded dizzy, Camshaft (Valve Lift .539 310 Duration .385 Cam Lift. 1.4:1), and a new exhaust with a stinger. will this do the trick to beat his car...will it be reliable. is this a good start. eventually i was gonna bore it out but i wanted to try modding the 1600 first so i could get used to it. thanks in advanced |
Define "beat". You need to spell out your definition of success here. What does "beat" mean to YOU?
My 1987 Porsche 911 with 200 hp totally stock engine regularly "beats" modified 500 hp Z06 Corvettes at the race track. They blast past me on the straights, but I catch and then pass them in braking zones and in the turns... |
|
Back to top |
|
|
millerje78 Samba Amishman
Joined: October 16, 2005 Posts: 2445 Location: Holmes County, Ohio
|
Posted: Wed Apr 14, 2010 10:25 pm Post subject: |
|
|
why did you post this in two forums?? _________________ always seeking a better way
my 73 standard project
do your research, consult with experts, and buy quality parts. you won't be sorry |
|
Back to top |
|
|
japtrap Samba Member
Joined: April 14, 2010 Posts: 12 Location: reno nevada
|
Posted: Wed Apr 14, 2010 10:41 pm Post subject: |
|
|
because i wanted to get the opinion of the people in both forums. and overall im getting the go big or go home answer??
and i want to take him in the straight 1/8th mile but 1/4 would be nice i can't get him to take it to the auto cross or scca meets. but on a handling note what do i do to make my bug handle well??
but as for the first question so bore out and stroke this motor or get a new one all together and if so what size i was looking at a 2332 long block for around 2k which is out of my price range because 2k is alot for a not running mototrr plus you need like 5k to make this worth it from what i read. so what size should i go for that i can find for pretty cheap and put down some good power. |
|
Back to top |
|
|
japtrap Samba Member
Joined: April 14, 2010 Posts: 12 Location: reno nevada
|
Posted: Wed Apr 14, 2010 10:46 pm Post subject: |
|
|
rustfree1967bug wrote: |
Plan on a 2275 with dual 44 idfs or 40 dellorto's. 9:0 compression 1 5/8 exhaust system, fk-8 cam, 40x35.5 valve heads with some good port work. That would be a good start and should put out 140-150 depending on carbs and heads. But it won't be cheap |
http://www.chircoestore.com/catalog/product_info.php?cPath=109_115_126&products_id=4141 will these be good heads.
can u post some links or suggest where to find the parts you have listed. |
|
Back to top |
|
|
lupin..the..3rd Samba Member
Joined: December 28, 2009 Posts: 1800
|
Posted: Thu Apr 15, 2010 8:52 am Post subject: |
|
|
Fast, Cheap, Reliable.
Pick any two. |
|
Back to top |
|
|
Joel Samba Member
Joined: September 04, 2006 Posts: 11099 Location: NSW Australia
|
Posted: Thu Apr 15, 2010 1:48 pm Post subject: |
|
|
you gotta remember you have power to weight on your side
granted an intergra isnt a huge car but id still bet its 200kg+ heavier than a bug
150hp in mine does 0-60mph in abit over 6.5sec which keeps it in front of most stock 4cyl N/A cars _________________ Quick little bug, you got a Porsche motor in that?
1974 Germanlook 1303 2.5 Suba-Beetle |
|
Back to top |
|
|
japtrap Samba Member
Joined: April 14, 2010 Posts: 12 Location: reno nevada
|
Posted: Thu Apr 15, 2010 4:52 pm Post subject: Re: newbie (face palm) lol |
|
|
japtrap wrote: |
so i just got a 1970 bug 1600sp and i did all my maintence to it and now i want to mod it. i have automotive experience i just came over from the honda world i got over it. lol i want to build this bug to beat my buddys 91 integra with z b20 vtec in it/ (roughly 170ish whp) i was gonna start with heads, dual carbs (weber 40s), upgraded dizzy, Camshaft (Valve Lift .539 310 Duration .385 Cam Lift. 1.4:1), and a new exhaust with a stinger. will this do the trick to beat his car...will it be reliable. is this a good start. eventually i was gonna bore it out but i wanted to try modding the 1600 first so i could get used to it. thanks in advanced |
so u have a buddy with a baja it has a 1902 or 1904 i dont remember which. will this do the trick if i put it in my bug. if i was to build on it. |
|
Back to top |
|
|
ANSAracingb Samba Member
Joined: October 29, 2009 Posts: 557 Location: Morgan Hill CA
|
Posted: Thu Apr 15, 2010 5:12 pm Post subject: |
|
|
japtrap wrote: |
and i want to take him in the straight 1/8th mile but 1/4 would be nice i can't get him to take it to the auto cross or scca meets. but on a handling note what do i do to make my bug handle well??
|
If he won't take it to autoX he can be beat. He doesn't know the limits of his car. Anybody can go in a straight line...practice learning the "edges of the envelope" of your car and you'll be much faster than him. Become comfortable with how your Beetle handles under acceleration, fast cornering, shifting while you have your hands full controlling your car, etc...and you won't have to worry; you'll win. |
|
Back to top |
|
|
Glenn Mr. 010
Joined: December 25, 2001 Posts: 76938 Location: Sneaking up behind you
|
Posted: Thu Apr 15, 2010 5:17 pm Post subject: |
|
|
lupin..the..3rd wrote: |
Fast, Cheap, Reliable.
Pick any two. |
I've heard that before
Better break open the piggy bank. _________________ Glenn
74 Beetle Specs | 74 Beetle Restoration | 2180cc Engine
"You may not get what you pay for, but you always pay for what you get"
Member #1009
#BlueSquare |
|
Back to top |
|
|
Wolfgangdieter Samba Member
Joined: June 25, 2008 Posts: 1958 Location: FL Panhandle
|
Posted: Fri Apr 16, 2010 5:23 am Post subject: |
|
|
Since you mentioned new cam - while case is split you need to add stroker crank and have it bored for larger (90.5 or 94mm) P&C. _________________ CMC '57 Porsche Speedster Replica and Dolphin boat tailed full pan VW MOD-T Street Buggy |
|
Back to top |
|
|
bugninva Samba Member
Joined: December 14, 2004 Posts: 8858 Location: sound it out.
|
Posted: Fri Apr 16, 2010 6:51 am Post subject: |
|
|
japtrap wrote: |
i was looking at a 2332 long block for around 2k which is out of my price range because 2k is alot for a not running mototrr plus you need like 5k to make this worth it from what i read. |
no offense intended, but to save you some major disappointment later, I'll say give up now... if you are cringing at the cost of the engine, you'll shit your pants when you have to drop a pile of pennies on a transaxle, axles, CV's/etc to match the higher output you are looking for... My current build is gonna end up somewhere around 9k or more(the engine).. I was quoted over 3k for a transaxle to compliment the engine... _________________
[email protected] wrote: |
With a show of hands, who has built over 1000 engines in the last 25 years? Anyone? |
GEX has. Just sayin
Last edited by bugninva on Fri Apr 16, 2010 7:11 pm; edited 1 time in total |
|
Back to top |
|
|
Fattie I'd roll it
Joined: November 27, 2005 Posts: 5582 Location: louisiana
|
|
Back to top |
|
|
japtrap Samba Member
Joined: April 14, 2010 Posts: 12 Location: reno nevada
|
Posted: Fri Apr 16, 2010 6:48 pm Post subject: |
|
|
how tough would the f20c1 swap be s2k motor right??? |
|
Back to top |
|
|
|