Author |
Message |
[email protected] Samba Member
Joined: August 27, 2002 Posts: 142 Location: Lexington KY
|
Posted: Fri Jul 04, 2003 4:55 pm Post subject: front kick panel dimensions? |
|
|
I'm recovering my old panels in my 67 dlx, but there were no front kick panels in it when I got it. I've been struggling with making a decent template from cardboard, but if there was a layout available somewhere on the web it would help me make a more exact panel cut-out. Anyone know whether and where a layout of the front kick panels might be available? John |
|
Back to top |
|
|
hazetguy Samba Member
Joined: April 06, 2001 Posts: 10773 Location: iT StiNgeD iTseLf tO dEAd
|
Posted: Fri Jul 04, 2003 8:19 pm Post subject: front kick panel dimensions? |
|
|
buy repop ones from wolfsburg west. they fit good, are reasonably cheap, and you can cover them with any material you want. WAY easier than trying to make them from questionable measurements. or find some good used ones at a show and trace them. just be sure to get the correct ones for your year, as the shape of headlight holes, fuse block size and location changed, and yours should have holes for th heater vents as well. i never heard of a "layout", since they are not rectangular and have many curves, corners, holes, etc. |
|
Back to top |
|
|
bally Samba Member
Joined: April 29, 2006 Posts: 1182 Location: Melbourne, Australia
|
Posted: Sat Oct 14, 2017 4:51 pm Post subject: Re: front kick panel dimensions? |
|
|
I need to buy a bit of board of o make myself a temporary kick panel (front panel in cab around the headlight and fuse box). Can anyone tell me the max dimensions please as I'd like to source some board before I next travel to my bus which is currently about 90 minutes drive away. Many thanks. Dave |
|
Back to top |
|
|
Clara Samba Member
Joined: June 14, 2003 Posts: 12400
|
Posted: Sun Oct 15, 2017 9:47 am Post subject: Re: front kick panel dimensions? |
|
|
bally wrote: |
I need to buy a bit of board of o make myself a temporary kick panel (front panel in cab around the headlight and fuse box). Can anyone tell me the max dimensions please as I'd like to source some board before I next travel to my bus which is currently about 90 minutes drive away. Many thanks. Dave |
24" by 32" should do with room to trim off.
FWIW I make interior panels and can ship internationally. pm me if interested. |
|
Back to top |
|
|
BarryL Samba Member
Joined: November 01, 2004 Posts: 14266 Location: Casa de Oro, California
|
Posted: Sun Oct 15, 2017 9:50 am Post subject: Re: front kick panel dimensions? |
|
|
bally wrote: |
Can anyone tell me the max dimensions |
You're going to need 25" X 20" minimum to cut it close. Since it's temporary you could get 24" X 24" but it will be 1/4" too short on one of the sides. Clara makes those so maybe she will chime in...bing-bing. |
|
Back to top |
|
|
hitest Samba Member
Joined: September 30, 2008 Posts: 10296 Location: Prime Meridian, ID
|
Posted: Sun Oct 15, 2017 11:07 am Post subject: Re: front kick panel dimensions? |
|
|
If this vehicle is a commercial class bus and it lacks Clara's panels it will plummet into a hole of homemade despair from which there lies little hope.
Either see Clara's panels for sale or plan on the bus being for sale.
(Clara has not reimbursed me for any portion of this post- but, I may need some M505 panels someday and my birthday's coming up) _________________
EverettB wrote: |
I wonder what the nut looks like.
|
'62 L390 151, '62 L469 117, '63 L380 113, '64 L87 311, '65 L512 265, '65 L31 SO-42, '66 L360 251, '68 L30k 141, '71 L12 113, '74 ORG 181
FU#5 |
|
Back to top |
|
|
BarryL Samba Member
Joined: November 01, 2004 Posts: 14266 Location: Casa de Oro, California
|
Posted: Sun Oct 15, 2017 6:47 pm Post subject: Re: front kick panel dimensions? |
|
|
Clara wrote: |
24" by 32" should do with room to trim off |
Whoa I didn't even realize this was posted prior to mine. So...nevermind. |
|
Back to top |
|
|
bally Samba Member
Joined: April 29, 2006 Posts: 1182 Location: Melbourne, Australia
|
Posted: Mon Oct 16, 2017 12:25 am Post subject: Re: front kick panel dimensions? |
|
|
Thanks for all your replies - I now have the info I need. If I was going for a stock commercial or Kombi interior I would definitely be up for Clara's panels. However, I'm going for more a 62 deluxe look and have just fitted a pair of these door pockets:
https://www.thesamba.com/vw/classifieds/detail.php?id=1443912
They're awesome!
Cheers,
Dave |
|
Back to top |
|
|
|