Author |
Message |
compdrag Samba Member
Joined: May 06, 2013 Posts: 336 Location: Jacksonville
|
Posted: Fri Oct 25, 2013 12:17 pm Post subject: |
|
|
Thanks to the newest members:
#263 Bvward
#231 IA-64
Updated:
#156 Cyclehobby added Picture
The registry list is on page 1 in PDF format. Also, if you want to add a pic of your car, you can either post it here, PM me or email me at [email protected]
Thanks for keeping the registry alive!
_________________ 61 Type 1 Patina
61 Type 1 Convertible
68 Type 2 Rivi |
|
Back to top |
|
|
Cyberkill04 Samba Member
Joined: October 28, 2013 Posts: 1 Location: Nw Ohio
|
Posted: Mon Oct 28, 2013 7:47 pm Post subject: Have to add |
|
|
May as well make my first post here..
Just traded my motorcycle for my new baby 67 Baja my daily driver
71K on her
Vin is 117510084
went to black out my plate and found a great sticker to cover it No... it does not have glasses and a big nose.. |
|
Back to top |
|
|
Osk_Moilahan Samba Member
Joined: October 29, 2013 Posts: 2 Location: Bedfordshire, UK
|
Posted: Tue Oct 29, 2013 4:14 am Post subject: |
|
|
First post on the forum so greetings to everyone. Here is my "mostly" original '67 1200A. VIN 117664697 and colour is ruby red L456.
|
|
Back to top |
|
|
compdrag Samba Member
Joined: May 06, 2013 Posts: 336 Location: Jacksonville
|
Posted: Tue Oct 29, 2013 9:54 am Post subject: |
|
|
We have Finally hit 300 in the registry. Let’s keep them coming!
Thanks to the newest members:
#208 Cyberkill04
# 241 Osk Moilahan
#267 RVTriumphs
Updated:
Thanks for keeping the registry alive!
_________________ 61 Type 1 Patina
61 Type 1 Convertible
68 Type 2 Rivi |
|
Back to top |
|
|
tham Samba Member
Joined: April 21, 2004 Posts: 13 Location: FRANCE-BEAULIEU 34
|
Posted: Sun Nov 10, 2013 11:34 pm Post subject: |
|
|
HI from France
just bought my 67,1300, L639 Zenith Blue , water blue upholstery VIN 11734112
|
|
Back to top |
|
|
veedubcrazy Samba Member
Joined: February 14, 2005 Posts: 2130 Location: La Porte, Tx.
|
Posted: Mon Nov 11, 2013 5:36 am Post subject: |
|
|
Looks good. Love the rear license plate... _________________ 1967 Deluxe Sedan |
|
Back to top |
|
|
theduck Samba Member
Joined: March 05, 2006 Posts: 236 Location: hesperia california
|
Posted: Tue Nov 12, 2013 10:26 pm Post subject: 1967 |
|
|
Hello all and glad I found this forum. So let me ask this question before I ask to join.I have had my 67 since 1977 or so.I have put many miles on it ,motors,etc.It was even stolen from in front of my house,police located it,stripped of the seats,motor and bumpers.I put it back together(living in L.A has it's perks) So now I want to restore it.It has many pan issues,sagging spring plates,holes,rusted brake lines etc.Wow I thought this was going to be a short email.So I have always wanted to have a early body style ,but also wanted IRS.I have found the IRS set up handles (again a matter of taste) alot better on corners etc.So if I do a 69 pan swap with my 67 body can I still join or do I take a hike? thx,theduck |
|
Back to top |
|
|
compdrag Samba Member
Joined: May 06, 2013 Posts: 336 Location: Jacksonville
|
Posted: Fri Nov 15, 2013 8:22 am Post subject: |
|
|
Thanks to the newest members:
#120 tham
Updated:
Thanks for keeping the registry alive!
_________________ 61 Type 1 Patina
61 Type 1 Convertible
68 Type 2 Rivi |
|
Back to top |
|
|
compdrag Samba Member
Joined: May 06, 2013 Posts: 336 Location: Jacksonville
|
Posted: Tue Dec 10, 2013 9:30 am Post subject: |
|
|
Thanks to the newest members:
#280 MACAM67
Updated:
Thanks for keeping the registry alive! _________________ 61 Type 1 Patina
61 Type 1 Convertible
68 Type 2 Rivi |
|
Back to top |
|
|
compdrag Samba Member
Joined: May 06, 2013 Posts: 336 Location: Jacksonville
|
Posted: Tue Dec 10, 2013 9:41 am Post subject: |
|
|
Thanks to the newest members:
#202 Andrew
Updated:
Thanks for keeping the registry alive!
_________________ 61 Type 1 Patina
61 Type 1 Convertible
68 Type 2 Rivi |
|
Back to top |
|
|
MACAM67 Samba Member
Joined: December 05, 2013 Posts: 32 Location: San Juan Island, WA
|
Posted: Tue Dec 10, 2013 9:13 pm Post subject: |
|
|
New member of our family. Perfect for summer runs to the DQ for ice cream with the grandkids. We're the third owners; still has original engine with about 95k miles. Some work to do, but isn't that the fun of it?
Thanks for adding "Wally2" to the registry.
|
|
Back to top |
|
|
compdrag Samba Member
Joined: May 06, 2013 Posts: 336 Location: Jacksonville
|
Posted: Wed Dec 11, 2013 7:05 pm Post subject: |
|
|
MACAM67 wrote: |
New member of our family. Perfect for summer runs to the DQ for ice cream with the grandkids. We're the third owners; still has original engine with about 95k miles. Some work to do, but isn't that the fun of it?
Thanks for adding "Wally2" to the registry.
|
Your welcome glad to add another one to the list. _________________ 61 Type 1 Patina
61 Type 1 Convertible
68 Type 2 Rivi |
|
Back to top |
|
|
brian121599 Samba Member
Joined: December 17, 2013 Posts: 1 Location: Fairfax, VA
|
Posted: Tue Dec 17, 2013 2:30 pm Post subject: 1967 Convertible |
|
|
New owner/member/poster
Picked up a gutted and essentially parted out '67 convertible project this past weekend!
#157 158 202
Now, serching for parts!!
|
|
Back to top |
|
|
andrewlandon67 Samba Member
Joined: December 19, 2013 Posts: 14 Location: Edgewater, CO
|
Posted: Thu Dec 19, 2013 10:36 pm Post subject: My '67 |
|
|
1967 Sedan, numbers matching crankcase upgraded to 1641 single port and a single 30 PICT 1 with a balanced crankshaft and EMPI header/muffler. The heat channels are rust-free, as is the rest of the pan and most of the body. Everything else is pretty much stock, with the exception of the LR fender being covered in stickers. The paint is original, but faded/half primer. I'm the 4th owner, after my dad. Long story short, she's been in the family longer than I have, and after sitting for a good ten years with the motor disassembled down to the case/internals, my dad and I slapped her back together, and I've spent the past 6 months getting her more and more roadworthy. I have her in the shop getting new ball joints and tie-rod ends, so I can't list the VIN number right now, but her birthday was within a week, give or take, of my dad's birthday on 10/25/66.
Sorry for the long post, and for anyone who is curious, the other rusting hulk is my roommate's 1949 Chevy Styline. |
|
Back to top |
|
|
arkansas warrior Samba Member
Joined: December 20, 2013 Posts: 15 Location: Arkansas
|
Posted: Fri Dec 20, 2013 2:30 pm Post subject: Just picked up a "67" beetle for my daughter |
|
|
Folks,
Might as well start my first post
Think I picked up a good Beetle for my daughter. It'll need a little TLC. But I.think it'll be a pretty reliable and stand out car for her. So the guy I bought it from didn't know a lot about it since he just liked to cruise in it. Let's start with this: according to title the VIN is 117458592. The stamp on the engine block is OF0280961
So my question to the group is, what the heck do I have? |
|
Back to top |
|
|
arkansas warrior Samba Member
Joined: December 20, 2013 Posts: 15 Location: Arkansas
|
Posted: Fri Dec 20, 2013 2:31 pm Post subject: Just picked up a "67" beetle for my daughter |
|
|
Folks,
Might as well start my first post
Think I picked up a good Beetle for my daughter. It'll need a little TLC. But I.think it'll be a pretty reliable and stand out car for her. So the guy I bought it from didn't know a lot about it since he just liked to cruise in it. Let's start with this: according to title the VIN is 117458592. The stamp on the engine block is OF0280961
So my question to the group is, what the heck do I have? |
|
Back to top |
|
|
compdrag Samba Member
Joined: May 06, 2013 Posts: 336 Location: Jacksonville
|
Posted: Sat Dec 28, 2013 9:21 pm Post subject: |
|
|
I'm on vacation I'll get you all added when I get home. _________________ 61 Type 1 Patina
61 Type 1 Convertible
68 Type 2 Rivi |
|
Back to top |
|
|
compdrag Samba Member
Joined: May 06, 2013 Posts: 336 Location: Jacksonville
|
Posted: Sat Dec 28, 2013 9:23 pm Post subject: |
|
|
The engine stamp is not your vin. You need to lift the back seat and check there to see if the title matches. Another place to look is in the trunk there should be a plate with the same info. _________________ 61 Type 1 Patina
61 Type 1 Convertible
68 Type 2 Rivi |
|
Back to top |
|
|
SteveM67 Samba Member
Joined: January 01, 2014 Posts: 4 Location: Germany
|
Posted: Wed Jan 01, 2014 9:43 am Post subject: |
|
|
hey everybody,
I am new to TheSamba and I roll a June 67 Beetle. Originally it was a 1300 with Saxomat option.
The pictures show how she currently looks like...
best regards
Steve
|
|
Back to top |
|
|
phanal Samba Member
Joined: July 14, 2004 Posts: 95 Location: Quebec, Canada
|
Posted: Thu Jan 02, 2014 6:22 pm Post subject: wheel setup |
|
|
Hi Steve,
I really like your wheel/suspension setup. That the kind of look that I want to give to my 67 bug. Can you give some info like wheel offset, tire dimension, front beam setup, etc. It's will be really helpfull.
Thanks.
Stephane
SteveM67 wrote: |
hey everybody,
I am new to TheSamba and I roll a June 67 Beetle. Originally it was a 1300 with Saxomat option.
The pictures show how she currently looks like...
best regards
Steve
|
_________________ Stephane Blanchet-Cote
1967 beetle Canadian standard
1967 deluxe Beetle (sold)
1967 deluxe Beetle (sold)
1967 deluxe Beetle (sold)
1959 panel bus (rusted out)
1985 vanagon (sold) |
|
Back to top |
|
|
|