| View previous topic :: View next topic |
| Author |
Message |
andelises
Samba Member
Joined: May 22, 2011
Posts: 158
Location: wales
|
 Posted: Sun Jul 17, 2011 12:27 am Post subject: |
 |
|
started on the engine now as i want the paint to harden before i tern the floor pan back over. i no how to rebiuld the engine but am unshore of settings. is there a book for this.
 |
|
| Back to top |
|
 |
LeftSatisfied
Samba Member
Joined: October 17, 2010
Posts: 144
Location: Orange County, Ca.
|
| Posted: Sun Jul 17, 2011 1:25 am Post subject: |
|
|
| andelises wrote: |
| hi does any one no if i will need short shocks and caster shims as i am lowering the front on say-a-way adjusters and the back 2 inner splines |
You can use the stock shocks for the rear with no problem at two splines but you should use shorter shocks in the front. If you were to only use drop spindles, there would be no need for shorter shocks since the shock mount distance does not change. However, the distance does change with adjusters and you may bottom out your shocks on bumps. Good luck to you. |
|
| Back to top |
|
|
andelises
Samba Member
Joined: May 22, 2011
Posts: 158
Location: wales
|
| Posted: Sun Jul 17, 2011 1:42 am Post subject: |
|
|
| LeftSatisfied wrote: |
| andelises wrote: |
| hi does any one no if i will need short shocks and caster shims as i am lowering the front on say-a-way adjusters and the back 2 inner splines |
You can use the stock shocks for the rear with no problem at two splines but you should use shorter shocks in the front. If you were to only use drop spindles, there would be no need for shorter shocks since the shock mount distance does not change. However, the distance does change with adjusters and you may bottom out your shocks on bumps. Good luck to you. |
thanks for that info. its a big help before i go buying the rong ones. ill put my order in now. cant wait  |
|
| Back to top |
|
|
andelises
Samba Member
Joined: May 22, 2011
Posts: 158
Location: wales
|
| Posted: Sun Jul 17, 2011 12:11 pm Post subject: |
|
|
got the pan terned back over today so i gave it a skim over with filler just to get rid or any dings and dents. then sanded it down. wet and dry. it then had a final coat of zinc 182 and two coats of hammered hammerite. ill give it a week to dry off now and then rebiuld it
 |
|
| Back to top |
|
|
andelises
Samba Member
Joined: May 22, 2011
Posts: 158
Location: wales
|
| Posted: Sun Aug 14, 2011 2:23 pm Post subject: |
|
|
well this is were im at. going slow but getting there
 |
|
| Back to top |
|
|
Redvolk65
Samba Member
Joined: September 07, 2010
Posts: 289
Location: Los Angeles,CA
|
| Posted: Sun Aug 14, 2011 4:50 pm Post subject: |
|
|
| wow thats great work mam.keep us posted. |
|
| Back to top |
|
|
DAB SUNNY
Samba Member
Joined: December 21, 2007
Posts: 16
|
| Posted: Sun Aug 14, 2011 8:29 pm Post subject: |
|
|
| Great job on the pan-looks new-!!! |
|
| Back to top |
|
|
andelises
Samba Member
Joined: May 22, 2011
Posts: 158
Location: wales
|
| Posted: Mon Aug 15, 2011 1:51 pm Post subject: |
|
|
| Redvolk65 wrote: |
| wow thats great work mam.keep us posted. |
hay redvolks65 thanks man will post up every new photo |
|
| Back to top |
|
|
andelises
Samba Member
Joined: May 22, 2011
Posts: 158
Location: wales
|
| Posted: Mon Aug 15, 2011 1:52 pm Post subject: |
|
|
| DAB SUNNY wrote: |
| Great job on the pan-looks new-!!! |
thanks dab sunny it was a lot of hard work. i didnt think it would ever end  |
|
| Back to top |
|
|
ovalhobo
Samba Member
Joined: January 25, 2010
Posts: 168
Location: Prince George, BC, Canada
|
| Posted: Mon Aug 15, 2011 8:24 pm Post subject: Re: 1967/8 resto |
|
|
| andelises wrote: |
hi all. i am new here and wanted to share my new restro with you. i picked this up a few weeks ago and payed £420 for it.
here is a few photos so far
 |
Great car. I like it. Rust seems pretty typical - a bit of work and it will be beautiful. I'd say don't do the volksrod (although I don't mind them, I try to picture myself still driving one when I'm 50!) Stock always looks right to me.
_________________
1957 Oval Window Canadian Standard beetle
1965 Beetle Canadian Standard
1968 Beetle (Frankenbeetle)
1959 Dove Blue Split Bus
1956 PG/SG Split bus
1973 Westfalia bus
Dreaming of a split beetle! |
|
| Back to top |
|
|
PatterBon
Samba Engine Connoisseur
Joined: September 27, 2008
Posts: 3228
Location: Seattle, Washington
|
| Posted: Mon Aug 15, 2011 8:47 pm Post subject: |
|
|
Your engine has a 36hp backing plate, later 36hp generator and a later 36hp generator pulley 
_________________
PNW Dub Folk & Kitsap dub Folk (KdF)
1973 Standard VW Beetle
1969 Cessna 172K Airplane
| johnshenry wrote: |
"Crusty"??
It would be easier to restore the Titanic. |
|
|
| Back to top |
|
|
andelises
Samba Member
Joined: May 22, 2011
Posts: 158
Location: wales
|
| Posted: Mon Aug 15, 2011 11:38 pm Post subject: |
|
|
| PatterBon wrote: |
| Your engine has a 36hp backing plate, later 36hp generator and a later 36hp generator pulley |
hi this was also a ??????????? to me . i have now found out that it is 6v and it was the swap over year. new and old parts for that year. im told there was 50 cars done this was. in 1200cc |
|
| Back to top |
|
|
KustomKulture
Samba Member
Joined: August 14, 2011
Posts: 12
Location: Germany
|
| Posted: Tue Aug 16, 2011 2:20 pm Post subject: |
|
|
| looks great. nice progress and work on the pan!!! will be watching this |
|
| Back to top |
|
|
PatterBon
Samba Engine Connoisseur
Joined: September 27, 2008
Posts: 3228
Location: Seattle, Washington
|
| Posted: Tue Aug 16, 2011 5:28 pm Post subject: |
|
|
| andelises wrote: |
| PatterBon wrote: |
| Your engine has a 36hp backing plate, later 36hp generator and a later 36hp generator pulley |
hi this was also a ??????????? to me . i have now found out that it is 6v and it was the swap over year. new and old parts for that year. im told there was 50 cars done this was. in 1200cc |
Hmm, the last of the 36ers stopped in August of 1960. So that engine is really off of what should have been in there stock, I think it was supposed to be the 1500cc in 1967 thru 1968 and then changed over to the 1600cc single port in 1969..I think..
_________________
PNW Dub Folk & Kitsap dub Folk (KdF)
1973 Standard VW Beetle
1969 Cessna 172K Airplane
| johnshenry wrote: |
"Crusty"??
It would be easier to restore the Titanic. |
|
|
| Back to top |
|
|
andelises
Samba Member
Joined: May 22, 2011
Posts: 158
Location: wales
|
| Posted: Tue Aug 16, 2011 11:31 pm Post subject: |
|
|
| PatterBon wrote: |
| andelises wrote: |
| PatterBon wrote: |
| Your engine has a 36hp backing plate, later 36hp generator and a later 36hp generator pulley |
hi this was also a ??????????? to me . i have now found out that it is 6v and it was the swap over year. new and old parts for that year. im told there was 50 cars done this was. in 1200cc |
Hmm, the last of the 36ers stopped in August of 1960. So that engine is really off of what should have been in there stock, I think it was supposed to be the 1500cc in 1967 thru 1968 and then changed over to the 1600cc single port in 1969..I think.. |
iv been trying to look this up for a long time but cant seem to find it out any more info on it |
|
| Back to top |
|
|
PatterBon
Samba Engine Connoisseur
Joined: September 27, 2008
Posts: 3228
Location: Seattle, Washington
|
| Posted: Wed Aug 17, 2011 10:17 am Post subject: |
|
|
| andelises wrote: |
| PatterBon wrote: |
| andelises wrote: |
| PatterBon wrote: |
| Your engine has a 36hp backing plate, later 36hp generator and a later 36hp generator pulley |
hi this was also a ??????????? to me . i have now found out that it is 6v and it was the swap over year. new and old parts for that year. im told there was 50 cars done this was. in 1200cc |
Hmm, the last of the 36ers stopped in August of 1960. So that engine is really off of what should have been in there stock, I think it was supposed to be the 1500cc in 1967 thru 1968 and then changed over to the 1600cc single port in 1969..I think.. |
iv been trying to look this up for a long time but cant seem to find it out any more info on it |
My guess it the PO used what he had lying around.
_________________
PNW Dub Folk & Kitsap dub Folk (KdF)
1973 Standard VW Beetle
1969 Cessna 172K Airplane
| johnshenry wrote: |
"Crusty"??
It would be easier to restore the Titanic. |
|
|
| Back to top |
|
|
flashburn
Samba Member
Joined: July 02, 2009
Posts: 56
Location: Columbus, OH
|
| Posted: Wed Aug 17, 2011 1:31 pm Post subject: |
|
|
Would you mind linking to the say-a-way adjusters your picked up. I'm on their site but I can't make sense of it...
Looks great from here btw!! |
|
| Back to top |
|
|
andelises
Samba Member
Joined: May 22, 2011
Posts: 158
Location: wales
|
| Posted: Wed Aug 17, 2011 11:40 pm Post subject: |
|
|
| flashburn wrote: |
Would you mind linking to the say-a-way adjusters your picked up. I'm on their site but I can't make sense of it...
Looks great from here btw!! |
hi have you got the say-a-ways ready. they are very easy to fit. i got mine from http://www.machine7.com/section.php?xSec=432 . i can tell you step by step on how to fit them. there is also some gud videos on you tube. ill wait to here from you |
|
| Back to top |
|
|
andelises
Samba Member
Joined: May 22, 2011
Posts: 158
Location: wales
|
| Posted: Sat Sep 17, 2011 11:41 pm Post subject: |
|
|
engine is now all rebiult appart from the tin wear so back to the floor pan . front beam back on and gear box just needs bolting in.
 |
|
| Back to top |
|
|
andelises
Samba Member
Joined: May 22, 2011
Posts: 158
Location: wales
|
| Posted: Thu Sep 22, 2011 11:07 pm Post subject: |
|
|
a mate of mine sent me this. its all made from vw parts so im told
 |
|
| Back to top |
|
|
|
