Author |
Message |
mtdorajohn Samba Member
Joined: June 02, 2010 Posts: 674
|
Posted: Sun Aug 28, 2011 5:56 pm Post subject: 1972 seat recline problem |
|
|
I am having an issue with my new 1972 Super Beetle.
The passenger seat recline adjuster seems to shift itself from the upright position to the gangster recline position all on it's own, while people are sitting in the seat. I lubricated the adjusters thinking that the unlatch clip was pulling on the adjuster, but no luck, it still auto reclines as you ride along. The springs are in place for the unlatch clip on both sides..
Any suggestions, exploded view pictures of the seat mechanism, and advice would be greatly welcome. Thanks, |
|
Back to top |
|
|
mtdorajohn Samba Member
Joined: June 02, 2010 Posts: 674
|
Posted: Mon Aug 29, 2011 5:12 am Post subject: |
|
|
worked on the problem last night and still don't have an answer.
Any suggestions? |
|
Back to top |
|
|
mtdorajohn Samba Member
Joined: June 02, 2010 Posts: 674
|
Posted: Mon Aug 29, 2011 4:58 pm Post subject: |
|
|
Ok, I took the seat out, tipped it on it's side and squeezed penetrating oil down the long shaft where the adjuster/seat hook is and worked it until oil came out the other end.
I am thinking that the hook portion is tight and the movement of the seat back causes the hook to move up and down. That up and down movement is slowly moving the recliner knob causing it to click to the next position.
I further put a tie-wrap around the recliner knob stop in hopes that it will keep it in place.
I'll keep you posted and still would like an exploded view and/or how to guide.
Thanks, |
|
Back to top |
|
|
vw_hank Samba Member
Joined: February 07, 2001 Posts: 5371 Location: Everett WA
|
Posted: Mon Aug 29, 2011 11:37 pm Post subject: |
|
|
So it's not A 69 thing the driver seat in my 69 would throw you back when you left from A stop. it was just that the lock part was worn out. how to fix? I dont know I never looked into it. i'm thinking its the gears in the ratchet mechanism are worn out, mabe need to weld on some metal and reshape them? but like I said I never looked into it so I dont know what the fix would be.. _________________ 1302s sunroof..
1600cc motor. Glenn ring 010. full toplineparts.com suspension. factory front disk brakes. Tram type-3 rear brakes. Hurst shifter. empi-8's. low-back's. tons of mods! |
|
Back to top |
|
|
|