Lost 34 Pict3 post

[laug6615]

Hey guys, looking for a post regarding carb. I have a new Empi, yea I know, and once installed the lower adjustment screw on the left side does nothing. All the way in or way out and there's no change. Seems like I read a post somewhere here that described those symptoms. Valves have been set, dwell is set, no vacuum leaks that I can find. Also running a SVDA distributor. Any advice would help or the post referencing this. Thanks.
_________________
Gary
______________________________
Allison Daytona DuneBuggy

[Glenn73]

Its an EMPI(Every Mistake Passes Inspection)
Get a good used/rebuilt Solex
_________________
1973 Super Sat from 93-2008
https://www.thesamba.com/vw/forum/viewtopic.php?t=...highlight=
1986 Vanagon thread Sat from 2005-2017 https://www.thesamba.com/vw/forum/viewtopic.php?t=719692

VW Transporter production film https://www.youtube.com/watch?v=rceTqDtGgz8

[laug6615]

Yea I know the history of EMPI. I just wanted to make sure its definitely a carb problem. Most of the used Solex carbs have worn shafts and I'm not sure where to find a good rebuilt one. Only thing new in my area is EMPI or Bocar. Both have about the same history.
_________________
Gary
______________________________
Allison Daytona DuneBuggy

[Joey]

If you have an old Solex carb try using the screw out of that - worked for me on an Euromax carb.

There's more info in the Stickys: http://www.thesamba.com/vw/forum/viewtopic.php?t=183060
_________________
Joey

‘60 Kombi - '74 Bus - '79 Panel - '65 Beetle