| View previous topic :: View next topic |
| Author |
Message |
tncad
Samba Member
Joined: May 01, 2011
Posts: 5
Location: Elizabethton, TN
|
 Posted: Sat Feb 11, 2012 10:06 am Post subject: 84 GTI 16v conversion |
 |
|
Need help. I am getting ready to put a 2.0 16v motor in my 84 gti. My wallet is deciding to tell me to leave the fuel injection. Most of the wiring is gone from my weber conversion I have now.
Is it possible to run the FI without all the wiring? I know I need the cold start valve wired up, but I don't know about anything else.
I just can't afford the weber conversion right now and keeping it FI seems to be the cheaper route.
Any input is appreciated.
Thanks in advance
Scott |
|
| Back to top |
|
 |
73sports
Samba Member
Joined: September 26, 2004
Posts: 1580
Location: Jersey Look Nation
|
| Posted: Sat Feb 11, 2012 3:02 pm Post subject: |
|
|
Yes you will need the harness and the control unit for the fuel injection and ignition systems to work properly.
_________________
I will never lie, but sometimes the truth changes.
Central Jersey VW Society |
|
| Back to top |
|
|
|
