Glass replacement or polish?

[Trevor P]

What have some of you done concerning the glass on your top shelf restorations? Trying to decide if I should get new glass cut for the doors and rear side windows or try one of the products that polishes out scratches in glass. The problem I see with cutting glass is that the sides will be of laminated type and not of the safety tempered type.
_________________
http://www.nuts.commercial-air.com/
53 Barndoor singlecab
53 Canadian standard oval
57 oval, 2332 & Berg 5

[Russ]

Trevor,
we tried different polishes on one really bad window we had and nothing seemed to work.
it was the driver side window and in the end it just stayed down for the most part.
we searched for a nicer piece and found one but by no means is any of the glass perfect.

i do know Darren D had all new glass cut and stenciled for his white 55
_________________
Cruiser pedals for sale (see my ad's)
55 hardtop finally finished

[nivag]

Trevor, Garibaldi Glass in North vancouver can cut you new tempered and etch it.
_________________
DVKK - Vancouver, BC

[Trevor P]

I assume this is the route you went with on the Zwitter.
Do they need a template or do they already have the correct ones? Do they do the Duro Glass stencil or the large Sekurit?
Shipping may be an issue with glass but heck it's worth a shot I guess. Do you have their contact info?
_________________
http://www.nuts.commercial-air.com/
53 Barndoor singlecab
53 Canadian standard oval
57 oval, 2332 & Berg 5

[sparkleplenty]

I sent mine out to have a couple of deep scratches removed out of my large logo Ghia ds door glass. The scratches are gone but now the glass has a little swirl / distortion in it. I have not yet decided which is worse. It seems in this day and age there should be a process to do this effectively...
_________________
56' European Oval Ragtop-Stock
56' Karmann Ghia Coupe-Stock
59' Italian Series I Li150 Lambretta-Stock
57' OG Paint Coral Red Oval-Stock

"Give a man a fish, feed him for a day. Teach a man to fish, feed him for a lifetime."

[Bruce]

I've been told by glass shop guys that if the scratch is deep enough that you can catch it with your fingernail, you can't polish it out.

If you're going to get new glass cut, they cut it from regular 5mm solid glass, then they temper it. Any etching of logos must be done before tempering.

Have a look at the stock glass. The top edge of the door glass has a pretty big radius on it. A shop I got new glass from uses a 3 angle grind instead of a radius. IMO it looked like $hit. The moral is, ask what edge they put on it.

I think by law they are supposed to put their own logos on it, with their DOT number. Obviously we don't like this. On the door glass, you can get them to put it down at the bottom by where the sash goes so it's never seen. If they are adamant about not leaving it off, you're kinda screwed for the quarter windows.
_________________

[Trevor P]

I talked to the guy that does our glass work at the shop. He said they can get it tempered for me. He confirmed my reservations on the polishing of tempered glass. He told me that it will look like crap cause it will leave a noticeable distorted area where I polished.
Thanks for the heads up on the logo and edge finish Bruce. I will make sure to quiz them on that before I decide to do this.
_________________
http://www.nuts.commercial-air.com/
53 Barndoor singlecab
53 Canadian standard oval
57 oval, 2332 & Berg 5

[bwaz]

I'm close to Garabaldi Glass if you want me to check into it Trevor?
Brain

[johnshenry]

New glass is the only way to go IMO.....
_________________
John Henry

'57 Deluxe
'51 11E Standard Sunroof (PhotoBucket resto pics)

[Trevor P]

[Russ]

Trevor,
if you do end up getting new glass local here.
i can pack it properly and ship it off to you.
i would probably just make a little skid or crate to hold it.

if interested let me know
Russ
_________________
Cruiser pedals for sale (see my ad's)
55 hardtop finally finished

[left_coast*9]

Hey Trevor what route did you end up going? I have a bunch of OG oval Duro glass right now, but the only really nice unscratched piece is the rear oval window. I want nice new unscratched stuff, with the Duro Glas etched logo to match the rear window if possible. Does Garabaldi Glass offer that?
_________________
Jet City 1957 VW Oval Rag Build:
http://www.thesamba.com/vw/forum/viewtopic.php?t=408791
1965 Sea Blue Beetle Sedan
http://www.thesamba.com/vw/forum/viewtopic.php?t=472827&postdays=0&postorder=asc&start=0

[Trevor P]

I ended up having all new glass cut and had logos laser etched by an engraving company here. The only used piece is the rear oval glass. Be careful on how they size your glass and grind your edges as I'm having issues getting the 1/4 window rubbers to fit properly in the corners even with Vewib molded rubbers.

_________________
http://www.nuts.commercial-air.com/
53 Barndoor singlecab
53 Canadian standard oval
57 oval, 2332 & Berg 5

[left_coast*9]

[Trevor P]

Yes have them match your windows exactly. The glass shop we deal with farmed it out to another company who does tempering. They cut and tempered it to the patterns/specs our glass shop sent to them. I think the 1/4 glass may have been done slightly off though hence my rubber fitment and this is an issue I have yet to address/solve.

Get them etched once you get the glass back from tempering
_________________
http://www.nuts.commercial-air.com/
53 Barndoor singlecab
53 Canadian standard oval
57 oval, 2332 & Berg 5

[Bruce]

What did the edges look like on the 4 pieces for the doors, Trevor?
_________________

[bwaz]

cost to do this... roughly Trevor? I know it will vary depending on who does it, and what connections you have... ballpark? BTW, they look great.
thanks
Brian

[silvertonguedevil]

^^X2
_________________
-Greg

1965 Patina Bug

[Dave]

You won't find him on here, as he does hot rod glass, but Chris Blattie,
[email protected] does the best glass work I have ever seen. He did it for my Model T, even shipped from Billings, MT it was cheaper than any local place, and it was packed to withstand a nuclear holocaust, and looked like friggin' jewelry.
Send him the pattern, what type of glass, any type of tint you may want, and he will take care of you.
_________________
2003 Samba Chummie Winner- Best Story

"Those that matter, don't mind,
and those that mind, don't matter"

[Trevor P]