Author |
Message |
alexvw Samba Member
Joined: February 03, 2011 Posts: 1023 Location: Hales Corners, Wisconsin
|
|
Back to top |
|
|
Wideopen Samba Member
Joined: May 17, 2012 Posts: 279 Location: N. California
|
Posted: Mon Jun 25, 2012 7:27 pm Post subject: |
|
|
Where did the filter adapter come from, if you know that would be the first place I would look. If you do not know, try searching the internet for the adapter, may be very helpful.
If that fails, try to safely remove the gasket to ues as a template and buy some gasket material at your LAPS and make your own. |
|
Back to top |
|
|
torsionbar Samba Member
Joined: December 11, 2010 Posts: 2215 Location: earf
|
Posted: Mon Jun 25, 2012 8:54 pm Post subject: |
|
|
cb maxi2 takes the same oil filter as a bmw 2002. mahle oc-25 and oc-84.
i don't know what this no-name filter cover takes, but i wouldn't be surprised if it's the same.
the gasket is same as stock pump cover gasket. just make one out of a piece of paper, or even out of some gasket material from the auto parts store.
also fyi you need the matching pump to use this thing. you can't simply bolt it on over your existing pump. (you can modify your existing pump however, if you have the skills to do so)
do not over-torque the bolts installing this thing. use a torque wrench and torque to spec. you'll be very sorry if you don't. _________________
Max Welton wrote: |
[air cooled vw's] are no longer suitable for the general public. The owner has to be be able to maintain the car. And that is after fixing all the deferred maintenance items and ill-conceived modifications. If you can't do those things you are pretty much screwed. |
|
|
Back to top |
|
|
alexvw Samba Member
Joined: February 03, 2011 Posts: 1023 Location: Hales Corners, Wisconsin
|
Posted: Mon Jun 25, 2012 9:35 pm Post subject: |
|
|
I have the matching pump, but the gasket for this I thought was a solid gasket and had 2 holes to match the ports? Or is this just a completely NORMAL gasket? _________________ 1995 Mitsubishi 3000GT SL
1974 Volkswagen Superbeetle( Mitsubishi 4G63T Swap in Progress )
http://www.thesamba.com/vw/forum/viewtopic.php?t=575769&highlight= |
|
Back to top |
|
|
Dismas Samba Member
Joined: September 16, 2010 Posts: 184 Location: Reno, NV
|
Posted: Tue Jun 26, 2012 12:33 am Post subject: |
|
|
it looks like a cb maxi pump, so go to cb performance and I would imagine they will sel you the gasket for it.
http://www.cbperformance.com/catalog.asp?ProductID=1671
1802 is probably your huckleberry _________________ 69/70 chop refurbed from a 70 baja |
|
Back to top |
|
|
alexvw Samba Member
Joined: February 03, 2011 Posts: 1023 Location: Hales Corners, Wisconsin
|
|
Back to top |
|
|
|