DanRadin Samba Member
Joined: July 23, 2012 Posts: 1 Location: Massachusetts
|
Posted: Mon Jul 23, 2012 2:25 pm Post subject: Cruise Control Module Pins |
|
|
I recently came into possession of a 1995 Eurovan Camper. At some point, someone had determined that the cruise control module was bad and so they removed it. I bought a used 443 907 305A module. The module has an 8-pin connector, a 2-pin connector, and a single male spade connector. I found plugs in the van behind that glove compartment that fit the 8-pin connector and the 2-pin connector but I did not find a wire to connect to the single male spade connector. I tried ignoring that connector and the cruise control would not function even though the other components seem to all be in place. Does anybody know what, if anything, is supposed to connect to the spade connector?
|
|