Author |
Message |
sick_boy Samba Member
Joined: October 22, 2012 Posts: 36 Location: Middleton, Id
|
Posted: Sat Dec 01, 2012 10:16 am Post subject: |
|
|
Yeah i still have work to do in the front i just needed it to be a roller when i left my old shop. Once i grab more metal ill be goin through the unfinished parts |
|
Back to top |
|
|
dustymojave Samba Member
Joined: January 07, 2007 Posts: 5802 Location: Lake LA, Mojave Desert, SoCal
|
Posted: Sun Dec 02, 2012 8:21 pm Post subject: |
|
|
airborndad wrote: |
Beam supports need to be wider especially the lower ones, you'll bend that beam really easily with them that close to the center on a widened beam
|
X2
I know you acknowledged this sickboy, but for those who didn't catch it, and there seem to be a lot of people who don't understand this issue... I have seen a bunch of nice full cage Bajas with bent beams from having the mounts too far inboard. _________________ Richard
Offroading VW based cars since 1965
Tech Inspection 1963 - 2012 SCCA/SCORE/HDRA/MORE/MDR +
Retired from building Bajas, Fiberglass Buggies and Rails in the Mojave Desert. Also Sprints & Midgets, Dry Lakes, Road Race cars. All types New and Vintage
SoCalBajas Member
Kicked Cancer's A$$...1st and 2nd round...Fight ain't over yet. |
|
Back to top |
|
|
thesatelliteguy Samba Member
Joined: January 06, 2007 Posts: 1515 Location: Santa Rosa CA
|
Posted: Sun Dec 02, 2012 11:11 pm Post subject: |
|
|
What kind of tube bender are you using?
Nice build btw, im jealous at how fast its coming up.
And your welds are CLEAN!!! I guess thats what you get after 7 years of fabbin. _________________ Toyotas are so bumpy it makes me sick, literally.
My build Page http://www.thesamba.com/vw/forum/viewtopic.php?t=383878 |
|
Back to top |
|
|
sick_boy Samba Member
Joined: October 22, 2012 Posts: 36 Location: Middleton, Id
|
Posted: Mon Dec 03, 2012 6:34 am Post subject: |
|
|
Dustymojave yea i definately agree a lot of things should be pointed out on here ive seen a ton of fundamental errors on some of the builds cause ppl simply dont kno its wrong and a few pointers can go a long way if listened to.
Thesataliteguy im using a jmr electrohydraulic bender it does pretty well and thanks all i can say is practice practice practice lol and iv had lots. The last month has been the biggest push but the new job is def slowin me down |
|
Back to top |
|
|
sick_boy Samba Member
Joined: October 22, 2012 Posts: 36 Location: Middleton, Id
|
Posted: Tue Jan 01, 2013 6:45 pm Post subject: |
|
|
Finaly got 2 days off and the ol' lady had work!! So i forced my self to work on the car (though i was supposed to work on my jeep) ... finished the fb minus skid plate and made the fuel cell tray.i need to make straps still tho and later im going to sheet it for fire safety. Next task is to BEGIN the rear end lol and mock up the dash. O yea plus steering, button up the front end , rear shock towers, brakes, fuel lines , wire it and make windows etc... lol
|
|
Back to top |
|
|
The Phil Samba Member
Joined: March 05, 2011 Posts: 1371 Location: Tucson
|
Posted: Wed Jan 02, 2013 12:40 am Post subject: |
|
|
Hey man, I just finally got to look through your build. What a nice baja!
I'm curious, did you do anything for your dash yet? If not, I've got a custom made dash and I can get you a picture of it. Maybe it would help you with your own ideas?
Any way, keep up the progress on this sick bug! _________________ "In case I don't see you, good afternoon , good evening, and goodnight."
My '66 Baja Build Page http://www.thesamba.com/vw/forum/viewtopic.php?t=456365
Free from the evils of facebook Dec 2012. No other Social Media. |
|
Back to top |
|
|
sick_boy Samba Member
Joined: October 22, 2012 Posts: 36 Location: Middleton, Id
|
Posted: Wed Jan 02, 2013 5:53 am Post subject: |
|
|
Yea man lets see what u got im open to ideas and thanks for the complements! |
|
Back to top |
|
|
The Phil Samba Member
Joined: March 05, 2011 Posts: 1371 Location: Tucson
|
Posted: Thu Jan 10, 2013 3:22 pm Post subject: |
|
|
well, I apologize for taking so long to get these up for you but here they are. If you want better pictures, I can get some. I took these pictures at a bad time of day.
I need to drill out that middle hole a little more for an additional switch. it was intended to be there, but for a different size switch.
i'm not sure, but I may have my template I used. If not, I may have given it to my VW mechanic. _________________ "In case I don't see you, good afternoon , good evening, and goodnight."
My '66 Baja Build Page http://www.thesamba.com/vw/forum/viewtopic.php?t=456365
Free from the evils of facebook Dec 2012. No other Social Media. |
|
Back to top |
|
|
mattfarmer Samba Member
Joined: May 10, 2011 Posts: 74 Location: fresno ca
|
Posted: Thu Jan 10, 2013 4:29 pm Post subject: |
|
|
Nice!!! Awesome welds man! |
|
Back to top |
|
|
sick_boy Samba Member
Joined: October 22, 2012 Posts: 36 Location: Middleton, Id
|
Posted: Mon Jan 14, 2013 6:29 am Post subject: |
|
|
That dash looks pretty good the layout keeps things simple. Im thinking something along those lines but 3dimentional with a panel facing driver n mabey a little aluminum glove box tucked away? Either way im not sure if im gona get to see this car finished last week i found out im gona be a daddy! So wel see what kinda magic i can pull off |
|
Back to top |
|
|
tobiism Samba Member
Joined: January 21, 2004 Posts: 502 Location: Chandler AZ
|
Posted: Mon Jan 14, 2013 8:19 am Post subject: |
|
|
Everything is looking great so far! Just out of curiosity, are you going to further brace the outside ends of the front beam? _________________ "There has never been a genius without a hint of madness."
-Albert Einstein |
|
Back to top |
|
|
sick_boy Samba Member
Joined: October 22, 2012 Posts: 36 Location: Middleton, Id
|
Posted: Mon Jan 14, 2013 1:13 pm Post subject: |
|
|
Yeah thr front end still needs some bracing i just havnt buttoned it up yet |
|
Back to top |
|
|
sick_boy Samba Member
Joined: October 22, 2012 Posts: 36 Location: Middleton, Id
|
Posted: Mon Aug 25, 2014 9:44 pm Post subject: |
|
|
Well its been almost 2 years since ive been on this forum but i know everybody likes closure on projects so i thought id give u all some. I still have the new job i took while building the car and unfortunately it killed the project for me and i had a kid (#2 is onown the way )so the car went bye bye. But i just saw it on craigslist and the guy litteraly just bolted on my last parts plus a couple. Sellers remorse is killing me right now lol but here are some final pics of it "done" [img]https://fbcdn-photos-e-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-0/10378129_825692594130980_2723560022156084857_n.jpg?oh=6c97ec13f96403487047ea1e8d64c9b4&oe=545AD0EE&__gda__=1417598852_4da748f7d21f9c03473ed63361d61ccd[/img] cant get the pic from yhe rear to come up ill try tomorow. Good seein the samba again! Guess i just need to build another... |
|
Back to top |
|
|
DanTheTripod Samba Member
Joined: August 25, 2014 Posts: 2 Location: Menifee
|
Posted: Mon Aug 25, 2014 10:36 pm Post subject: |
|
|
It was a little bit more than just bolting on the parts that you had for it, you did do an excellent job though.. I put in another $2500 dollars maybe your memory is a little fried pretty hard bolting on engine cage, finishing the rear Of the cage and coilover mounts installing disc brakes, steering column, cross members in the front, installing fuel cell. the hardest part was bolting all the New wiring lol and countless other items, you are a great welder but your memory is a little fuzzy, by the way you can buy it!
PS I talked to your buddy that got the Jeep heard the thing blew up sorry about that I'm not being sarcastic that sucks
oh yeah and don't call me guy |
|
Back to top |
|
|
sick_boy Samba Member
Joined: October 22, 2012 Posts: 36 Location: Middleton, Id
|
Posted: Tue Aug 26, 2014 6:33 am Post subject: |
|
|
I wasnt tryin to all u out on anything im glad the car got done n it looks good.
Yea i dont care the motor blew he never paid me off anyway lol |
|
Back to top |
|
|
HERC Samba Member
Joined: July 30, 2007 Posts: 1003 Location: Menifee
|
Posted: Tue Aug 26, 2014 10:31 am Post subject: |
|
|
Where are you in Menifee ? That's where I live. Sure would like you to build a cage for me. _________________ Herc |
|
Back to top |
|
|
sick_boy Samba Member
Joined: October 22, 2012 Posts: 36 Location: Middleton, Id
|
Posted: Tue Aug 26, 2014 11:46 am Post subject: |
|
|
I moved to murrieta but my equipment is still in menifee off scott road |
|
Back to top |
|
|
DanTheTripod Samba Member
Joined: August 25, 2014 Posts: 2 Location: Menifee
|
Posted: Tue Aug 26, 2014 5:45 pm Post subject: |
|
|
Sick boy Come over and drive it. I moved to Menifee about a half a mile away from your dad |
|
Back to top |
|
|
sick_boy Samba Member
Joined: October 22, 2012 Posts: 36 Location: Middleton, Id
|
Posted: Tue Aug 26, 2014 6:23 pm Post subject: |
|
|
Man that would be so rad i think i still have ur number ill text u |
|
Back to top |
|
|
bajamike560 Samba Member
Joined: December 11, 2009 Posts: 544 Location: Vancouver WA
|
Posted: Tue Aug 26, 2014 8:38 pm Post subject: |
|
|
Dan, is it for sale? give me the scoop please?
Mike _________________ Jackpot motorsports |
|
Back to top |
|
|
|