Author |
Message |
Scotty Samba Member
Joined: July 02, 2003 Posts: 1531 Location: Northampton - Uk
|
Posted: Mon Aug 11, 2008 1:06 am Post subject: Genuine Barndoor Safaris |
|
|
Could those of you that have genuine safaris in your barndoors post up some pics of the dash tabs and catches etc please, be even better if they were factory fitted, thanks. _________________
EverettB wrote: |
I'd be curious to know the length of his tip.
|
http://scottys-stuff.blogspot.com/ |
|
Back to top |
|
|
NOS PARTS Samba Member
Joined: June 24, 2001 Posts: 377 Location: behind the wheel, safari's open
|
Posted: Mon Aug 11, 2008 1:50 am Post subject: |
|
|
here pics of factory safari 54, - frames....
if trying to put together a "correct set";
latches all the same 50-67
latch gasket all the same
latch screws all the same-chrome
dash tabs are the same til late 59-60
dash screws (3 different styles 50-59-60, 60-63, 64-67)
weld in brackets will have square nuts on back, til 67 or later will have square nuts on back, but grounded corners of square
slider all the same til 67
slider rivet spring washer all the same
slider rivet early with smooth face, later one has machining spirals=always plated steel, NEVER alum
fiber washer all the same
bevel edge metal washers all the same
1 eyed duck same as up to 63, 64-67 will be later style with bigger mouth
glass to frame seal unique to BD frames=same profile as early pop out
frame scraper seal unique to BD frames=same profile as pop out til 67
frame to body seal unique to BD frames
wiper disconect unique to BD=similar to 55-63, but shaft longer, as well as brass threaded bushing longer to clear BD wiper grommet
hoping that help |
|
Back to top |
|
|
Scotty Samba Member
Joined: July 02, 2003 Posts: 1531 Location: Northampton - Uk
|
Posted: Mon Aug 11, 2008 5:18 am Post subject: |
|
|
Thanks for your help david _________________
EverettB wrote: |
I'd be curious to know the length of his tip.
|
http://scottys-stuff.blogspot.com/ |
|
Back to top |
|
|
Kasten68 Samba Member
Joined: March 26, 2005 Posts: 136 Location: Switzerland
|
Posted: Tue Aug 12, 2008 5:35 am Post subject: |
|
|
here's a picture of og safari's on my 54 BD
_________________ VW über alles ! |
|
Back to top |
|
|
jmsmilin Samba's Most Posted
Joined: November 10, 2005 Posts: 3302 Location: Out on Pa-troll.
|
Posted: Tue Aug 12, 2008 6:46 am Post subject: |
|
|
NOS PARTS wrote: |
here pics of factory safari 54, - frames....
if trying to put together a "correct set";
latches all the same 50-67
latch gasket all the same
latch screws all the same-chrome
dash tabs are the same til late 59-60
dash screws (3 different styles 50-59-60, 60-63, 64-67)
weld in brackets will have square nuts on back, til 67 or later will have square nuts on back, but grounded corners of square
slider all the same til 67
slider rivet spring washer all the same
slider rivet early with smooth face, later one has machining spirals=always plated steel, NEVER alum
fiber washer all the same
bevel edge metal washers all the same
1 eyed duck same as up to 63, 64-67 will be later style with bigger mouth
glass to frame seal unique to BD frames=same profile as early pop out
frame scraper seal unique to BD frames=same profile as pop out til 67
frame to body seal unique to BD frames
wiper disconect unique to BD=similar to 55-63, but shaft longer, as well as brass threaded bushing longer to clear BD wiper grommet
hoping that help |
nice find _________________ Der Schmutzige Süden.
(o\ ! /o) | o \/ o | (o)=|=(o) [o\|_|_|/o] \m/ |
|
Back to top |
|
|
KILLERWATT Samba Member
Joined: November 18, 2003 Posts: 3298 Location: Vero Beach
|
Posted: Tue Aug 12, 2008 7:59 am Post subject: |
|
|
I don't know if this is any help but here's Rafferty's @ CTS
|
|
Back to top |
|
|
BeaterBarndoor Samba Member
Joined: December 15, 2000 Posts: 824 Location: North Carolina
|
Posted: Tue Aug 12, 2008 8:15 am Post subject: |
|
|
here are some shots of gatorwyatts original safari'd truck.
note as NOSParts listed, the BD welded nuts are squared
whereas the later ones are rounded on the corners
_________________ www.thebustransfer.com
Whaaaaat? |
|
Back to top |
|
|
Scotty Samba Member
Joined: July 02, 2003 Posts: 1531 Location: Northampton - Uk
|
Posted: Tue Aug 12, 2008 9:39 am Post subject: |
|
|
It was the dash tabs that I needed to check on. I thought all flat top dash tabs were the same, but I had been told barndoor ones were different to 55 on buses. Unless anyone can tell me different then they're the same. The only thing I can think of being slightly different is that they don't have a curve to their base as the barndoor 'dash' is flat compared to later buses. It's proving difficult to find a genuine safari barndoor to check as these parts are easily swapped out _________________
EverettB wrote: |
I'd be curious to know the length of his tip.
|
http://scottys-stuff.blogspot.com/ |
|
Back to top |
|
|
BeaterBarndoor Samba Member
Joined: December 15, 2000 Posts: 824 Location: North Carolina
|
Posted: Tue Aug 12, 2008 10:22 am Post subject: |
|
|
thats interesting.never heard of the tabs being different but its always possible. i just looked in my parts book which is mainly post bd but does have bd parts in it. it does tell that the outer(tall) tabs are 20-117xxx and later but the inner(shorter) tabs there is no indication of year change. i was thinking maybe they were taller than later? but i just looked at my 53 which im pretty confident i have post bd tabs and nothing looks out of place. all parts line up fine, no large gaps from latch to tab.
be interesting to see proof of any difference. _________________ www.thebustransfer.com
Whaaaaat? |
|
Back to top |
|
|
Scotty Samba Member
Joined: July 02, 2003 Posts: 1531 Location: Northampton - Uk
|
Posted: Wed Aug 13, 2008 5:47 am Post subject: |
|
|
So the og brackets I have are for later buses (with chamfered corners) and I think I have a 64-67 one eyed duck..... Anyone got any pics of the late duck?
Anyone got a source for the slider rivets and the fibre washers?
Does anyone make barndoor length wiper disengagers? I was going to buy some new ones and modify them _________________
EverettB wrote: |
I'd be curious to know the length of his tip.
|
http://scottys-stuff.blogspot.com/ |
|
Back to top |
|
|
gatorwyatt Samba Member
Joined: April 24, 2002 Posts: 1867 Location: Clearwater Fl.
|
Posted: Wed Aug 13, 2008 6:17 am Post subject: |
|
|
Scotty wrote: |
So the og brackets I have are for later buses (with chamfered corners) and I think I have a 64-67 one eyed duck..... Anyone got any pics of the late duck?
Anyone got a source for the slider rivets and the fibre washers?
Does anyone make barndoor length wiper disengagers? I was going to buy some new ones and modify them |
hopefully soon dvd will make the disconnects as that is what we have been discussing.as for the fiber washers check your local dealer...they have a N part number and are still available through the dealer here.ooops did i just let a secret out?i bought a bunch a while back and there was still a bunch in stock.
anyone have a nice set of four catches that are not worn out and wiggley that they want to sell for a good cause i could use a set.p.m. me if so. _________________ www.blastserv.com
wanted:
RHD Barndoor floor mat..reproduction is fine |
|
Back to top |
|
|
BeaterBarndoor Samba Member
Joined: December 15, 2000 Posts: 824 Location: North Carolina
|
Posted: Wed Aug 13, 2008 8:24 am Post subject: |
|
|
Scotty wrote: |
So the og brackets I have are for later buses (with chamfered corners) and I think I have a 64-67 one eyed duck..... Anyone got any pics of the late duck?
Anyone got a source for the slider rivets and the fibre washers?
Does anyone make barndoor length wiper disengagers? I was going to buy some new ones and modify them |
i would check with david(NOSPARTS) on all acounts. as gator said, he is working on making disconnects and i have seen him selling the fibre washers on ebay. i think he could also show you the difference of the ducks. he makes both styles as well as some other nice rubber products.
the rivets you can get from wolfsburgwest or david may also have them. ive seen a few sources for them. _________________ www.thebustransfer.com
Whaaaaat? |
|
Back to top |
|
|
gatorwyatt Samba Member
Joined: April 24, 2002 Posts: 1867 Location: Clearwater Fl.
|
Posted: Fri Sep 19, 2008 6:19 am Post subject: |
|
|
well...scotty the answer you needed came yesterday when i atempted to install some outer(tall)dash tabs and the screw holes didnt line up.it looks like the bottom of the tabs are shorter to allow the tabs to have enough room on the dash to keep from apppearing to be falling off the dash or hang over the edge... _________________ www.blastserv.com
wanted:
RHD Barndoor floor mat..reproduction is fine |
|
Back to top |
|
|
Scotty Samba Member
Joined: July 02, 2003 Posts: 1531 Location: Northampton - Uk
|
Posted: Mon Sep 22, 2008 11:17 am Post subject: |
|
|
Thanks for that info! _________________
EverettB wrote: |
I'd be curious to know the length of his tip.
|
http://scottys-stuff.blogspot.com/ |
|
Back to top |
|
|
Scotty Samba Member
Joined: July 02, 2003 Posts: 1531 Location: Northampton - Uk
|
Posted: Tue Sep 23, 2008 6:17 am Post subject: |
|
|
You can see in the following pics that it looks like barndoor dash tabs are completely different to later buses, the top looks like it has convex curve to the top of it rather than being flat or having a concave curve like the 55 on tabs
I can't make out the tabs near the centre window bar or the passenger side but the tab on the drivers side clearly has a curved top
_________________
EverettB wrote: |
I'd be curious to know the length of his tip.
|
http://scottys-stuff.blogspot.com/ |
|
Back to top |
|
|
gatorwyatt Samba Member
Joined: April 24, 2002 Posts: 1867 Location: Clearwater Fl.
|
Posted: Sat Sep 27, 2008 9:13 am Post subject: |
|
|
the screw holes dont line up for the factory dash and the factory tabs... _________________ www.blastserv.com
wanted:
RHD Barndoor floor mat..reproduction is fine |
|
Back to top |
|
|
Monkeyspinner Samba Member
Joined: October 11, 2004 Posts: 69 Location: UK
|
Posted: Mon Sep 29, 2008 5:15 pm Post subject: |
|
|
I can't remember which photos i sent you exactly but just incase here's a couple...
|
|
Back to top |
|
|
BeaterBarndoor Samba Member
Joined: December 15, 2000 Posts: 824 Location: North Carolina
|
Posted: Mon Sep 29, 2008 5:47 pm Post subject: |
|
|
so according to these photos and what is written in my later parts book, maybe this makes sense...
the inner/center(shorter) seems to be the same as a later domed dash tab which in my book just has a part number and its description, whereas the outer(taller) tab is obviously different than a later domed tab. also in my book it has its part number and description but also reads "from chassis 20-117 902,making it barndoor/post BD specific. the shorter one does not have any chassis cutoff #s. _________________ www.thebustransfer.com
Whaaaaat? |
|
Back to top |
|
|
Scotty Samba Member
Joined: July 02, 2003 Posts: 1531 Location: Northampton - Uk
|
Posted: Tue Sep 30, 2008 12:48 am Post subject: |
|
|
I got some other photos from someone with og safaris and it looks like the short tab has the same dims as a later one, but has the slightly different shaped top like the long one monkeyspinner posted above. I haven't seen too many later flat top dash tabs but the ones I have seen have perfect radiused corners where as the barndoor ones seem to have a slight corner to them, and a slight curve to the top. The later ones I saw were flat along the top edge.
I think the short one monkeyspinner posted is a later one, it looks like it has a flat top compared to the short one in the pics I posted _________________
EverettB wrote: |
I'd be curious to know the length of his tip.
|
http://scottys-stuff.blogspot.com/ |
|
Back to top |
|
|
Monkeyspinner Samba Member
Joined: October 11, 2004 Posts: 69 Location: UK
|
Posted: Tue Sep 30, 2008 3:14 am Post subject: |
|
|
Scotty wrote: |
I think the short one monkeyspinner posted is a later one, it looks like it has a flat top compared to the short one in the pics I posted |
Maybe they changed at some point during Barndoor production... mines an early jan 55 so could they have changed to the later design by then maybe?? |
|
Back to top |
|
|
|