Author |
Message |
ROCKOROD71 Samba Member
Joined: January 18, 2012 Posts: 2770 Location: Boston, MA
|
Posted: Wed Mar 05, 2014 9:28 am Post subject: |
|
|
an old oil bath air cleaner painted army green would look bad ass atop that engine, just my opinion.
At first I was searching for a barf emoticon, but that thing is cool as hell. love the ammo box tail light deals on each side! _________________ 1971 STD BEETLE- DD-1st car, 1st love. keepin' it stock! 1600DP, Solex 34-3 Mexi Bosch SVDA Dist NOW w/POINTS
1977 WESTY "KrustyKamper" 2L FI
79SuperVert wrote: |
30 years from now, the next guy may not want your girlfriend, but he may want your classic car, depending on how nice you were to it. |
asiab3 wrote: |
Careful guys, a petulant child can grow up to be president these days. |
**winter drivers: no survivors!**rust warrior**#keepbodyshopsbusy** |
|
Back to top |
|
|
SBD Samba Member
Joined: October 24, 2012 Posts: 3269 Location: SOUTH DAKOTA
|
|
Back to top |
|
|
johnnypan Samba Member
Joined: October 24, 2007 Posts: 7431 Location: sackamenna
|
Posted: Wed Mar 05, 2014 9:52 am Post subject: |
|
|
Nice looking concept...a little light on the structure though. |
|
Back to top |
|
|
nextgen Samba Member
Joined: August 19, 2004 Posts: 6025 Location: CONGERS, N.Y.
|
|
Back to top |
|
|
Natel Samba Member
Joined: February 05, 2014 Posts: 36 Location: BILLINGS, MT
|
Posted: Wed Mar 05, 2014 11:46 am Post subject: |
|
|
This thing is great. Im from Montana, the land of no automotive restriction, alot of rat rod style builds up here. Its refreshing to see a bug turn out so well in a different style other than the standard defendered chop top out of the box look. Fantastic job. _________________ 1969 Standard (SOLD)
1974 Standard
406 Customs Car Club |
|
Back to top |
|
|
el Mao Samba Member
Joined: April 03, 2012 Posts: 82 Location: MIAMI
|
Posted: Wed Mar 05, 2014 12:31 pm Post subject: |
|
|
Thank you all for the compliments. Like many of you said, I didn't just want to make the typical chop job without fenders and a beam extension. everyone is doing that now so I just went with my own thing.
VDubNut:
The fold down window is a great idea, I'll see if I can make something. I also have an idea of making some bows to put a canvas top all the way to the back. we'll see.
DirtyCossack:
I don't know what you are talking about I bought all my surplus stuff from ebay. I swear to god, and no, I'm not a 91E I was a 12B (BTW I'm atheist)
truckerb1 & nexgen:
The engine is a 1600 single port with a counterweighted crank and I-beam rods. everything else is stock except the valve springs that are single heavy duty for the increase revs and moderate boost.
The supercharger is an AMR500 out of some Japanese car. I got it from Japan and I'm selling them for $400 +shipping.
The ignition is using a megajolt unit with crank trigger wheel and ford EDIS4 and coil. I think it performs pretty good. I am trying to get a bigger single barrel carb. like a 44 Kaddron or something. I get about 6PSI of boost the way it is geared now. if I get a smaller pulley I could go to 8PSI but it's good the way it is right now. I estimate about 80HP. good enough for such a light vehicle. I drove it on the highway to 94MPH. I almost shat myself. those tires are not meant for speed.
ROCKORD71: Great idea about the oil bath air cleaner. I'm going to the Lakeland Classic show next weekend. I'll try to pick one up.
Johnnypan:
Maybe it seems light but I used some statics principles and some common sense on the structure, I took some physics in coolege and some structure classes too so that helped. If you watched the video you can see that I have used it for more than show. and so far it is still straight.
Lusting69:
after taking it on that dirt track I really want to do it. _________________ 73 (o\_!_/o)
69 (o\ ! /o) |
|
Back to top |
|
|
el Mao Samba Member
Joined: April 03, 2012 Posts: 82 Location: MIAMI
|
|
Back to top |
|
|
johnnypan Samba Member
Joined: October 24, 2007 Posts: 7431 Location: sackamenna
|
Posted: Wed Mar 05, 2014 4:39 pm Post subject: |
|
|
el Mao wrote: |
I took some physics in coolege |
really...bet you figured English wasn't worth the time huh.. |
|
Back to top |
|
|
mukluk Samba Member
Joined: October 18, 2012 Posts: 7023 Location: Clyde, TX
|
Posted: Wed Mar 05, 2014 11:23 pm Post subject: |
|
|
johnnypan wrote: |
Nice looking concept...a little light on the structure though. |
Got to thinking to myself when I saw that pic, "Hey, that looks a lot like an old set of metal shelves my dad had when I was a little kid, wonder if that's what he's using to build a car."
Then I saw this pic and got my answer...
Love the imagination put into this project, must admit it looks really cool, but I just can't get over the thought of driving a set of shelves down the road. |
|
Back to top |
|
|
thechief86 Samba Member
Joined: January 18, 2012 Posts: 860 Location: middle tn
|
Posted: Thu Mar 06, 2014 11:23 am Post subject: |
|
|
Yeah, is there a reason you chose the Erector set over stock floorpans? You kept enough of the body that you could have left the floorpans and heater channels alone, leaving you a vehicle that is still structurally sound. Hell, I would have built a roll cage as well, but I'm a jeep guy so..... _________________ "A poor workman always blames his parts... Ya gotta have skillz to hang junk." -johnnypan |
|
Back to top |
|
|
el Mao Samba Member
Joined: April 03, 2012 Posts: 82 Location: MIAMI
|
Posted: Thu Mar 06, 2014 12:12 pm Post subject: |
|
|
LMAO
mukluk you are damn right. They are not the flimsy home depot shelves with bent perforated rails. These are old heavy duty steel angles. they are very strong and the important thing is how I placed them. Steel is strongest in tension.
Anyway I'm going to take some pictures of the undercarriage of my Motorized Shelf System (MSS as I now call it) so you can see how tight it looks.
Thechief86:
It is structurally sound...
the heater channels, floor pans and door pillars were the reason I took this endeavor. They were rusted out beyond my desire to repair. Besides I don't know if anyone noticed but it has the bottom 6 inches sectioned off. It couldn't have fit into the original pan.
Once again thank you for your concern over the structural integrity of my MSS but I assure you that if after taking it 3 times around that Motocross dirt track, twisting and turning, catching some air and bottoming out several times over, I think it can handle the road. I'm not comparing it with a jeep or a rail but for what it is... it is pretty damn good. _________________ 73 (o\_!_/o)
69 (o\ ! /o) |
|
Back to top |
|
|
johnnypan Samba Member
Joined: October 24, 2007 Posts: 7431 Location: sackamenna
|
Posted: Fri Mar 07, 2014 7:56 am Post subject: |
|
|
Weakness in structural integrity fails in two different ways.. catastrophically, where the front end of the car snaps off,and by fatigue, where repeated stress caused cracking and work hardening over time resulting in a catastrophic failure.
Steel design varies by contract,there is no guarantee that shelf steel is even to mild steel specs. |
|
Back to top |
|
|
el Mao Samba Member
Joined: April 03, 2012 Posts: 82 Location: MIAMI
|
Posted: Fri Mar 07, 2014 4:07 pm Post subject: |
|
|
johnnypan wrote: |
Weakness in structural integrity fails in two different ways.. catastrophically, where the front end of the car snaps off,and by fatigue, where repeated stress caused cracking and work hardening over time resulting in a catastrophic failure.
Steel design varies by contract,there is no guarantee that shelf steel is even to mild steel specs. |
Point taken, thank you. _________________ 73 (o\_!_/o)
69 (o\ ! /o) |
|
Back to top |
|
|
thechief86 Samba Member
Joined: January 18, 2012 Posts: 860 Location: middle tn
|
Posted: Sat Mar 08, 2014 8:22 am Post subject: |
|
|
I didn't mean to be condescending, man. I was just curious about it.
As an off-road fabricator by trade, I'm just prone to over-build things with tubing and make them way stronger than they need to be, often at the cost of making stuff a little slower with the weight. The last race buggy I built was more a rail buggy with the sheet metal fitted back on to make it "look" like a truck. It could have easily been raced as it sat, without the sheetmetal.
Your car does look neat, but if I bought it, by the end of the weekend it would have gained a couple hundred pounds
Like I said, my method is probably unnecessary especially if it is staying on the street... _________________ "A poor workman always blames his parts... Ya gotta have skillz to hang junk." -johnnypan |
|
Back to top |
|
|
dirtkeeper Samba Member
Joined: February 19, 2008 Posts: 3200 Location: Left of everywhere
|
Posted: Sat Mar 08, 2014 10:17 am Post subject: |
|
|
Bob Loblaw wrote: |
Not gonna lie. When I started looking at the pictures of the chopping, all I could think was "What the fuck is this guy doing? What an idiot."
But I gotta say, I love the way it's taking shape. Badass!
|
I was thinkin the very same thing till I saw it finishing up.
I |
|
Back to top |
|
|
el Mao Samba Member
Joined: April 03, 2012 Posts: 82 Location: MIAMI
|
Posted: Sat Mar 08, 2014 12:54 pm Post subject: |
|
|
thechief86 wrote: |
I didn't mean to be condescending, man. I was just curious about it.
As an off-road fabricator by trade, I'm just prone to over-build things with tubing and make them way stronger than they need to be, often at the cost of making stuff a little slower with the weight. The last race buggy I built was more a rail buggy with the sheet metal fitted back on to make it "look" like a truck. It could have easily been raced as it sat, without the sheetmetal.
Your car does look neat, but if I bought it, by the end of the weekend it would have gained a couple hundred pounds
Like I said, my method is probably unnecessary especially if it is staying on the street... |
No problem, I didn't take your comment in a condescending way that's why I replied with information and I concur with you, it's light on structure because I designed it in such a way for what it is being used for.
Now the other guy .... he is really condescending, I checked out some of his other posts and he sounds the same everywhere. I guess it makes him feel "right" and superior. I come here to learn, share, and enjoy myself, not to tell people they are wrong and how their builds will CATASTROFICALLY FAIL without any qualifications.
BTW thank you dirtkeeper even I wasn't sure about it until I finished it. Well, I haven't finished it so we'll see what else I do to it. _________________ 73 (o\_!_/o)
69 (o\ ! /o) |
|
Back to top |
|
|
iowegian Samba Curmudgeon
Joined: February 16, 2005 Posts: 9829 Location: Somewhere between Dubuque and Keokuk
|
Posted: Sat Mar 08, 2014 6:36 pm Post subject: |
|
|
el Mao wrote: |
thechief86 wrote: |
I didn't mean to be condescending, man. I was just curious about it.
As an off-road fabricator by trade, I'm just prone to over-build things with tubing and make them way stronger than they need to be, often at the cost of making stuff a little slower with the weight. The last race buggy I built was more a rail buggy with the sheet metal fitted back on to make it "look" like a truck. It could have easily been raced as it sat, without the sheetmetal.
Your car does look neat, but if I bought it, by the end of the weekend it would have gained a couple hundred pounds
Like I said, my method is probably unnecessary especially if it is staying on the street... |
No problem, I didn't take your comment in a condescending way that's why I replied with information and I concur with you, it's light on structure because I designed it in such a way for what it is being used for.
Now the other guy .... he is really condescending, I checked out some of his other posts and he sounds the same everywhere. I guess it makes him feel "right" and superior. I come here to learn, share, and enjoy myself, not to tell people they are wrong and how their builds will CATASTROFICALLY FAIL without any qualifications.
|
This is so true. That donkey has neither a build thread of his own nor a sticky. |
|
Back to top |
|
|
thechief86 Samba Member
Joined: January 18, 2012 Posts: 860 Location: middle tn
|
Posted: Sat Mar 08, 2014 7:19 pm Post subject: |
|
|
He may be condescending at times, but Johnnypan is the guy you want givin you advice. He will not hesitate to give you correct information and tell you she something won't work or is unsafe. I realize that it isn't what you say but how you say it, but the guy is right. His advice has helped me on numerous occasions, and I give him partial credit for the fact that I can trust my car to get me anywhere, with an engine I built with bits of advice here as there from him and others... _________________ "A poor workman always blames his parts... Ya gotta have skillz to hang junk." -johnnypan |
|
Back to top |
|
|
dubllyou Samba Member
Joined: May 24, 2012 Posts: 1251 Location: Jack & Cee Motors
|
Posted: Sat Mar 08, 2014 7:32 pm Post subject: |
|
|
Outside the box and very box-like at the same time. I like it!
I'm curious about the sensor in the exhaust in this pic tho'
Oxygen? If so, what's it hooked to on the other end and why not transferred to the current exhaust?
No comment on the condescension from the one who gets all butt-hurt when someone points out his own faults. I can't believe you actually made a comment on someone else's spelling... _________________ Two wrongs don't make a right...
three lefts do.
Wade
vwo60 wrote: |
You cannot polish a turd, but you can roll it in glitter. |
|
|
Back to top |
|
|
sb001 Samba Member
Joined: May 19, 2011 Posts: 10406 Location: NW Arkansas
|
Posted: Sat Mar 08, 2014 7:49 pm Post subject: |
|
|
thechief86 wrote: |
He may be condescending at times, but Johnnypan is the guy you want givin you advice. He will not hesitate to give you correct information and tell you she something won't work or is unsafe. I realize that it isn't what you say but how you say it, but the guy is right. His advice has helped me on numerous occasions, and I give him partial credit for the fact that I can trust my car to get me anywhere, with an engine I built with bits of advice here as there from him and others... |
I guess here's as good a place as any to admit this- as much as johnny and I have gotten into it on here, I still credit him with being the one who first noticed my engine was running on low compression from a simple video I posted, and got me to double check it--thus my engine rebuild. (And yes I probably should have replaced the rods- Hard to fight the guy lending you space and tools necessary for the job when he doesn't want to spend the time on it.) _________________ I'm the humblest guy on this board.
1969 autostick sedan, family owned since new
1600 SP engine
Solex 30 PICT 3 carburetor
Bosch 113905205AE autostick distributor |
|
Back to top |
|
|
|