| Author |
Message |
dawerks
Samba Member
Joined: September 15, 2010
Posts: 2349
|
 Posted: Thu Apr 10, 2014 7:33 am Post subject: Cancel/neutralize/clean Reducer ? |
 |
|
Is there a way to clean off excess Reducer spill? I got some on paint and I want to know how to clean it or neutralize it from doing any damage.
_________________
"There is only one sin; disconnection from self." |
|
| Back to top |
|
 |
UreKem Paints
Samba Member
Joined: March 23, 2014
Posts: 26
Location: Perkinston, Mississippi
|
| Posted: Thu Apr 10, 2014 7:59 pm Post subject: |
|
|
Generally, urethane reducer will evaporate and not leave behind anything that will harm a well cured 2K finish. Most of the damage would occur shortly after the reducer spilled on it if it was un-cured or was not a strong 2K product. If the finish is damaged fixes could range from as easy as wet sanding and buffing to as extreme as re-prime and paint.
There are a handful of reactive reducers out there that can contain some reactive acid that gets left behind. If you have a reactive reducer that was spilled on the finish simply gently dry as best you can and then clean with soap and water with a good water rinse...good luck!
_________________
Visit www.thecoatingstore.com for quality UreKem automotive Paints. |
|
| Back to top |
|
|
|
