Author |
Message |
t3sters Samba Member
Joined: March 13, 2014 Posts: 111 Location: Henderson, Texas
|
|
Back to top |
|
|
BL3Manx Samba Member
Joined: August 29, 2006 Posts: 6767 Location: Northern California
|
Posted: Wed Apr 16, 2014 7:52 pm Post subject: |
|
|
Not really anything to be gained by one of those in a fiberglass buggy, most of the "back seats" are already bench seat shaped. There's very little legroom(almost none) in the back seat of a short wheel base buggy, however, if you want to use it for that purpose, most owners get a couple pieces of plywood cut to fit and upholster them with foam, fabric and vinyl.
|
|
Back to top |
|
|
didget69 Samba Member
Joined: July 22, 2004 Posts: 4927 Location: Raleigh, North Carolina
|
Posted: Wed Apr 16, 2014 8:16 pm Post subject: |
|
|
It's a padded parcel shelf; not really a seat... and you won't want to mount seat belts into just the fiberglass.
bnc _________________ I never found the need to impress people with any mechanic certifications, trophies or track wins... unless it was for Mom to post on the refrigerator door. |
|
Back to top |
|
|
t3sters Samba Member
Joined: March 13, 2014 Posts: 111 Location: Henderson, Texas
|
Posted: Thu Apr 17, 2014 4:28 am Post subject: |
|
|
Got any more pics on making it or somewhat of a tutorial? |
|
Back to top |
|
|
BL3Manx Samba Member
Joined: August 29, 2006 Posts: 6767 Location: Northern California
|
Posted: Thu Apr 17, 2014 7:08 am Post subject: |
|
|
The fourth post down in this thread is kinda a how to
http://www.thesamba.com/vw/forum/viewtopic.php?t=576931
There used to be companies that made them but you're better off making one you know will fit.
This one is fairly typical.
Last edited by BL3Manx on Thu Apr 17, 2014 7:38 am; edited 3 times in total |
|
Back to top |
|
|
manxdavid Samba Member
Joined: November 24, 2003 Posts: 1841 Location: David Jones, Anglesey, North Wales, UK. Manxclub #678.
|
Posted: Thu Apr 17, 2014 7:09 am Post subject: |
|
|
That one that Moore's sell is intended more as a rear seat for a long wheelbase sandrail. |
|
Back to top |
|
|
Dale M. Samba Member
Joined: April 12, 2006 Posts: 20380 Location: Just a tiny bit west of Yosemite Valley
|
Posted: Thu Apr 17, 2014 7:50 am Post subject: |
|
|
Since there is very little leg room (virtually none) and its difficult to add seat belts and there is virtually no protection from roll bar or cage, I consider rear area as a "package deck" and nothing else and not acceptably for anything but cooler and maybe bags of groceries when coming home from shopping (with netting to keep things from flying out) ....
If you are to use back area as passenger position you probably need to add supports or stiffeners underneath and seat belts in a way the seat belts and stiffener does not cause more injury to passengers in case of an "event" ...
Dale _________________ “Fear The Government That Wants To Take Your Guns" - Thomas Jefferson.
"Kellison Sand Piper Roadster" For Street & Show.
"Joe Pody Sandrover" Buggy with 2180 for Autocross (Sold)
============================================================
All suggestions and advice are purely my own opinion. You are free to ignore them if you wish ... |
|
Back to top |
|
|
t3sters Samba Member
Joined: March 13, 2014 Posts: 111 Location: Henderson, Texas
|
Posted: Thu Apr 17, 2014 8:05 am Post subject: |
|
|
If not a seat I would love to somehow make a storage spot, any ideas on that? |
|
Back to top |
|
|
manxdavid Samba Member
Joined: November 24, 2003 Posts: 1841 Location: David Jones, Anglesey, North Wales, UK. Manxclub #678.
|
Posted: Thu Apr 17, 2014 8:10 am Post subject: |
|
|
t3sters wrote: |
If not a seat I would love to somehow make a storage spot, any ideas on that? |
Some plywood covered in carpet or rubber mat and one of those elasticated cargo nets that bargain stores sell stapled from the back would do the job. Make a template of the back area of your buggy with a sheet of wallpaper or thin card. No two kits are the same shape, they're seldom even symetrical! |
|
Back to top |
|
|
t3sters Samba Member
Joined: March 13, 2014 Posts: 111 Location: Henderson, Texas
|
Posted: Thu Apr 17, 2014 8:59 am Post subject: |
|
|
Thanks, I'll look into it ! |
|
Back to top |
|
|
HeidelbergJohn4.0 Samba Member
Joined: March 01, 2004 Posts: 1199 Location: Havre de Grace, MD
|
|
Back to top |
|
|
t3sters Samba Member
Joined: March 13, 2014 Posts: 111 Location: Henderson, Texas
|
Posted: Thu Apr 17, 2014 10:33 am Post subject: |
|
|
I saw an earlier post some where talking of using ammo boxes , any other ideas of a tool box or something? need something that can be bolted down and locked |
|
Back to top |
|
|
t3sters Samba Member
Joined: March 13, 2014 Posts: 111 Location: Henderson, Texas
|
|
Back to top |
|
|
Dale M. Samba Member
Joined: April 12, 2006 Posts: 20380 Location: Just a tiny bit west of Yosemite Valley
|
Posted: Thu Apr 17, 2014 11:27 am Post subject: |
|
|
manxdavid wrote: |
t3sters wrote: |
If not a seat I would love to somehow make a storage spot, any ideas on that? |
Some plywood covered in carpet or rubber mat and one of those elasticated cargo nets that bargain stores sell stapled from the back would do the job. Make a template of the back area of your buggy with a sheet of wallpaper or thin card. No two kits are the same shape, they're seldom even symetrical! |
That is what I did, had friend edge some carpet and wrapped it around plywood now have carpeted base...
Dale _________________ “Fear The Government That Wants To Take Your Guns" - Thomas Jefferson.
"Kellison Sand Piper Roadster" For Street & Show.
"Joe Pody Sandrover" Buggy with 2180 for Autocross (Sold)
============================================================
All suggestions and advice are purely my own opinion. You are free to ignore them if you wish ... |
|
Back to top |
|
|
Rathbone Samba Member
Joined: February 25, 2006 Posts: 235 Location: Palm Coast, Florida
|
Posted: Thu Apr 17, 2014 7:13 pm Post subject: |
|
|
But without a back seat you can only pick up one lady at a time!
I met these ladies while cruising the beach in Daytona. They were here on vacation and really needed to take a ride. The speed limit on the beach is 10 mph so the safety risk is minimal. _________________ (o\_i_/o) what you've just said ... is one of the most insanely idiotic things I have ever heard. At no point in your rambling, incoherent response were you even close to anything that could be considered a rational thought. Everyone in this room is now dumber for having listened to it. I award you no points, and may God have mercy on your soul - Mr. Oblaski, Principal |
|
Back to top |
|
|
Dale M. Samba Member
Joined: April 12, 2006 Posts: 20380 Location: Just a tiny bit west of Yosemite Valley
|
Posted: Thu Apr 17, 2014 7:49 pm Post subject: |
|
|
Rathbone wrote: |
But without a back seat you can only pick up one lady at a time!
I met these ladies while cruising the beach in Daytona. They were here on vacation and really needed to take a ride. The speed limit on the beach is 10 mph so the safety risk is minimal. |
Complete lack of any safety roll bar or cage noted.... What about highway speeds...
Dale _________________ “Fear The Government That Wants To Take Your Guns" - Thomas Jefferson.
"Kellison Sand Piper Roadster" For Street & Show.
"Joe Pody Sandrover" Buggy with 2180 for Autocross (Sold)
============================================================
All suggestions and advice are purely my own opinion. You are free to ignore them if you wish ... |
|
Back to top |
|
|
lostinbaja Samba Member
Joined: December 19, 2004 Posts: 4036 Location: Frankfort, Illinois
|
Posted: Thu Apr 17, 2014 7:54 pm Post subject: |
|
|
I have a piece of 1/4" plywood that I coated top and bottom with fiberglass resin to seal it then I had it upholstered, it is only an inch thick. It's a package tray for camping equipment that looks like a seat. _________________ Jerry...
If it's being towed, it must be a trailer!
"Vee Grow Too Soon Oldt Und Too Late Schmardt"
RIP Morgan
My photos
http://www.manxgallery.org/gallery/album92 |
|
Back to top |
|
|
BL3Manx Samba Member
Joined: August 29, 2006 Posts: 6767 Location: Northern California
|
Posted: Thu Apr 17, 2014 8:37 pm Post subject: |
|
|
Dale M. wrote: |
Complete lack of any safety roll bar or cage noted.... What about highway speeds...Dale |
There are over 9 million motorcycles registered in the US. That buggy is safer than every one. Most of the roll cages I've seen on swb buggies have the steel bars too close to the occupants heads making serious injuries in minor collisions more likely and so making them them more dangerous than not having any rollover structure at all.
I wish there was a sticky thread for this debate so it wouldn't keep rearing its un-protected head |
|
Back to top |
|
|
EVfun Samba Member
Joined: April 01, 2012 Posts: 5481 Location: Seattle
|
Posted: Thu Apr 17, 2014 9:49 pm Post subject: |
|
|
Dale M. wrote: |
Complete lack of any safety roll bar or cage noted.... What about highway speeds...
Dale |
If safety was my primary concern I would drive around in a late model full size sedan, or perhaps a Hummer H1. _________________
Wildthings wrote: |
As a general rule, cheap parts are the most expensive parts you can buy. |
|
|
Back to top |
|
|
manxdavid Samba Member
Joined: November 24, 2003 Posts: 1841 Location: David Jones, Anglesey, North Wales, UK. Manxclub #678.
|
Posted: Fri Apr 18, 2014 3:27 am Post subject: |
|
|
My wife is much happier me being out in my Manx (simple roll bar, no seatbelts) doing a couple of thousand 'fun' miles a year than the alternative which would probably be a motorcycle or maybe a Lambretta scooter. I drive sensibly, I'm never going to roll it over on the street the way I drive and it's bright orange so it's relitively easy for folks to see me coming. If it were painted cammo and I drove like a nut job then I may get into some trouble but as it is I very much doubt it, so I'll take my chances. |
|
Back to top |
|
|
|