Author |
Message |
grandpa pete Samba Member
Joined: July 06, 2008 Posts: 6426 Location: St. Petersburg, FL
|
|
Back to top |
|
|
Bobnotch Samba Member
Joined: July 06, 2003 Posts: 22422 Location: Kimball, Mi
|
|
Back to top |
|
|
Notch Samba Member
Joined: May 31, 2005 Posts: 142 Location: Lodi, CA
|
Posted: Mon Apr 21, 2014 9:32 am Post subject: |
|
|
I am not aware of an adapter that will allow you to check the oil on a standard Type 1 case. I believe the type one dipstick is in accessible when the Type 3 fan shroud is installed. The adapters Bob found are for adapting a Type 3 or universal case to use a type 1 dipstick. I don't know if any of these will clear a the fan shroud on a type three. _________________ '64 Notchback
'67 Bug
(sunroofs both)
1964 Lavey Craft, Flatbottom V-Drive, 406 Ford |
|
Back to top |
|
|
Bobnotch Samba Member
Joined: July 06, 2003 Posts: 22422 Location: Kimball, Mi
|
Posted: Mon Apr 21, 2014 9:36 am Post subject: |
|
|
Notch wrote: |
I am not aware of an adapter that will allow you to check the oil on a standard Type 1 case. I believe the type one dipstick is in accessible when the Type 3 fan shroud is installed. The adapters Bob found are for adapting a Type 3 or universal case to use a type 1 dipstick. I don't know if any of these will clear a the fan shroud on a type three. |
He has a type 3 engine case, and is looking at converting the dip stick to a t-1 style due to a lack of clearance in his "sedan delivery" project. _________________ Bob 65 Notch S with Sunroof
71 Notch ...aka Krunchy; build pics here;
http://www.thesamba.com/vw/forum/viewtopic.php?t=249390 -been busy working
64 T-34 Ghia...aka Wolfie, under construction... http://www.thesamba.com/vw/forum/viewtopic.php?t=412120
Tram wrote: |
"Friends are God's way of apologizing for relatives." |
Tram wrote: |
People keep confusing "restored" and "restroyed". |
|
|
Back to top |
|
|
eyetzr Samba Member
Joined: October 09, 2013 Posts: 1425 Location: Toronto, Ontario. Canada
|
Posted: Mon Apr 21, 2014 9:39 am Post subject: |
|
|
Hey grandpa, I thought you had a type 3 motor in that project? I am with Notch on this the adapter will interfere with the fan housing, mount. |
|
Back to top |
|
|
eyetzr Samba Member
Joined: October 09, 2013 Posts: 1425 Location: Toronto, Ontario. Canada
|
Posted: Mon Apr 21, 2014 9:40 am Post subject: |
|
|
modify the type 3 tube & re route the rubber to connect the body portion to the engine. |
|
Back to top |
|
|
Bobnotch Samba Member
Joined: July 06, 2003 Posts: 22422 Location: Kimball, Mi
|
Posted: Mon Apr 21, 2014 4:45 pm Post subject: |
|
|
eyetzr wrote: |
modify the type 3 tube & re route the rubber to connect the body portion to the engine. |
Have you looked at his project in the last couple of days? He's got a good chunk of t-3 load floor in place, and has already removed a 1.5 inch section out of the engine hatch, along with adjusting the rest of the floor to get it inside. Last I looked (earlier today), he was working on tieing in the "new floor to the bus walls. He still had a gap between the bus rear door (narrowed), and the modified t-3 floor. That gap had a step in it too.
I had suggested it to him, as he might not have enough room for the oil filler and t-3 dipstick tube arrangement. Like he said himself, he wished he had the T-3 floor before he started, as he's about 8 inches short of getting things to fit back there (part of the reason for taking 1.5 inches out of the hatch). _________________ Bob 65 Notch S with Sunroof
71 Notch ...aka Krunchy; build pics here;
http://www.thesamba.com/vw/forum/viewtopic.php?t=249390 -been busy working
64 T-34 Ghia...aka Wolfie, under construction... http://www.thesamba.com/vw/forum/viewtopic.php?t=412120
Tram wrote: |
"Friends are God's way of apologizing for relatives." |
Tram wrote: |
People keep confusing "restored" and "restroyed". |
|
|
Back to top |
|
|
grandpa pete Samba Member
Joined: July 06, 2008 Posts: 6426 Location: St. Petersburg, FL
|
|
Back to top |
|
|
eyetzr Samba Member
Joined: October 09, 2013 Posts: 1425 Location: Toronto, Ontario. Canada
|
Posted: Tue Apr 22, 2014 4:57 am Post subject: |
|
|
hey GP, no Bobnotch I had not noticed the latest build update. But I would agree it looks like an indented panel on the floor & an indent on the lid would give him his clearance for the dip stick. You have a great build on the go. I guess the next car you will save more of the sections until you finish the car. |
|
Back to top |
|
|
grandpa pete Samba Member
Joined: July 06, 2008 Posts: 6426 Location: St. Petersburg, FL
|
Posted: Wed Apr 23, 2014 7:47 pm Post subject: |
|
|
Hello Bobnotch ; How would I go about turning the tube out of the engine so that it is more vertical ?..........TOOLS ,,,,,,,,,,TECHNIQUE ?................THKS _________________ 63 two fold rag
66 sedan delivery Type 6
http://www.thesamba.com/vw/forum/viewtopic.php?t=569619&highlight=sedan+delivery |
|
Back to top |
|
|
Mike Fisher Samba Member
Joined: January 30, 2006 Posts: 17970 Location: Eugene, OR
|
Posted: Thu Apr 24, 2014 6:11 am Post subject: |
|
|
If you turn it vertical you still have to indent it or it will be sticking up into the flat load floor? I have a black rubber mat on mine.
_________________ https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold
Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey |
|
Back to top |
|
|
eyetzr Samba Member
Joined: October 09, 2013 Posts: 1425 Location: Toronto, Ontario. Canada
|
Posted: Thu Apr 24, 2014 6:32 am Post subject: |
|
|
I think he is going to have to indent or be real creative with the tube fitment. you will probably have to adjust the length of the dip stick as well. |
|
Back to top |
|
|
Bobnotch Samba Member
Joined: July 06, 2003 Posts: 22422 Location: Kimball, Mi
|
Posted: Thu Apr 24, 2014 10:02 am Post subject: |
|
|
grandpa pete wrote: |
Hello Bobnotch ; How would I go about turning the tube out of the engine so that it is more vertical ?..........TOOLS ,,,,,,,,,,TECHNIQUE ?................THKS |
With it bolted to the engine case, I'd use an oxy torch, and get the tube cherry red, and bend it up. I only say have it on the engine, so you know how far you can actually take it (the cooling shroud will limit how far you can go). _________________ Bob 65 Notch S with Sunroof
71 Notch ...aka Krunchy; build pics here;
http://www.thesamba.com/vw/forum/viewtopic.php?t=249390 -been busy working
64 T-34 Ghia...aka Wolfie, under construction... http://www.thesamba.com/vw/forum/viewtopic.php?t=412120
Tram wrote: |
"Friends are God's way of apologizing for relatives." |
Tram wrote: |
People keep confusing "restored" and "restroyed". |
|
|
Back to top |
|
|
|