Author |
Message |
ataraxia Samba Member
Joined: March 19, 2010 Posts: 4504 Location: Illinois
|
Posted: Mon Aug 18, 2014 6:45 am Post subject: Pushbutton Assembly and 12v conversion |
|
|
I'm considering a 12 volt conversion on my 1964 Variant S.
Going from memory on 4 hours of sleep, I'm pretty sure I have all of the pieces to the puzzle:
*Bulbs
*Horn
*Electronic signal flasher
*Headlight relay
*Generator
*Starter with 6volt teeth
*Battery
*12v wiper motor
*Voltage regulator
*Coil
*Fan shroud
*Generator strap
*Chokes
What did I forget?
One question remains:
What problem will I find when converting a pushbutton dash car to 12 volt?
Before I go diving in I'd like to know about how it'll affect the pushbutton assembly (if at all). I don't think there are any issues beyond the wiper switch which might not like the conversion without a voltage drop doohickey.
Any experience with a pushbutton assembly and a 12 volt conversion? What did you find?
Last edited by ataraxia on Mon Aug 18, 2014 7:23 am; edited 1 time in total |
|
Back to top |
|
|
ron smith Samba Member
Joined: October 24, 2003 Posts: 33 Location: San Diego
|
Posted: Mon Aug 18, 2014 7:16 am Post subject: pushbuttons |
|
|
I been useing my pushbuttons in my 64 notch for the last 15 years and have no problems useing 12 volts. my wiper motor is still 6v and you just need to turn the switch to the slowest speed. |
|
Back to top |
|
|
ataraxia Samba Member
Joined: March 19, 2010 Posts: 4504 Location: Illinois
|
Posted: Mon Aug 18, 2014 7:22 am Post subject: Re: pushbuttons |
|
|
ron smith wrote: |
I been useing my pushbuttons in my 64 notch for the last 15 years and have no problems useing 12 volts. my wiper motor is still 6v and you just need to turn the switch to the slowest speed. |
Thanks for the input...I'd hate to roast the pushbutton assembly by overlooking something. |
|
Back to top |
|
|
Donnie strickland Samba Member
Joined: December 21, 2009 Posts: 2403 Location: Moody, AL
|
Posted: Mon Aug 18, 2014 7:28 am Post subject: |
|
|
That sounds like everything...
You can use a 6 volt starter. I used one for 16 years on my 66 Bug. _________________ 71 Elm Green FI A/T Squareback |
|
Back to top |
|
|
ataraxia Samba Member
Joined: March 19, 2010 Posts: 4504 Location: Illinois
|
Posted: Mon Aug 18, 2014 7:31 am Post subject: |
|
|
Donnie strickland wrote: |
That sounds like everything...
You can use a 6 volt starter. I used one for 16 years on my 66 Bug. |
I've done that in the past...I have a brand new IMI starter with the 6 volt teeth so I'm going to use it. |
|
Back to top |
|
|
Donnie strickland Samba Member
Joined: December 21, 2009 Posts: 2403 Location: Moody, AL
|
|
Back to top |
|
|
Tram Samba Socialist
Joined: May 02, 2003 Posts: 22728 Location: Still Feelin' the Bern- Once you've felt it you can't un- feel it.
|
Posted: Mon Aug 18, 2014 9:16 am Post subject: Re: pushbuttons |
|
|
ataraxia wrote: |
ron smith wrote: |
I been useing my pushbuttons in my 64 notch for the last 15 years and have no problems useing 12 volts. my wiper motor is still 6v and you just need to turn the switch to the slowest speed. |
Thanks for the input...I'd hate to roast the pushbutton assembly by overlooking something. |
Putting an old Chrysler ballast resistor inline to the wiper motor works to keep the speed sane.
Don't forget the clock. _________________ Немає виправдання для війни! Я з Україною.
Bryan67 wrote: |
Just my hands. And a little lube. No tools. |
To best contact me, please use the EMAIL function in my profile |
|
Back to top |
|
|
ataraxia Samba Member
Joined: March 19, 2010 Posts: 4504 Location: Illinois
|
Posted: Mon Aug 18, 2014 10:05 am Post subject: Re: pushbuttons |
|
|
Tram wrote: |
ataraxia wrote: |
ron smith wrote: |
I been useing my pushbuttons in my 64 notch for the last 15 years and have no problems useing 12 volts. my wiper motor is still 6v and you just need to turn the switch to the slowest speed. |
Thanks for the input...I'd hate to roast the pushbutton assembly by overlooking something. |
Putting an old Chrysler ballast resistor inline to the wiper motor works to keep the speed sane.
Don't forget the clock. |
Got a link for that resistor?
Tach in the clock hole so I'm good there... |
|
Back to top |
|
|
Tram Samba Socialist
Joined: May 02, 2003 Posts: 22728 Location: Still Feelin' the Bern- Once you've felt it you can't un- feel it.
|
Posted: Mon Aug 18, 2014 10:20 am Post subject: Re: pushbuttons |
|
|
ataraxia wrote: |
Tram wrote: |
ataraxia wrote: |
ron smith wrote: |
I been useing my pushbuttons in my 64 notch for the last 15 years and have no problems useing 12 volts. my wiper motor is still 6v and you just need to turn the switch to the slowest speed. |
Thanks for the input...I'd hate to roast the pushbutton assembly by overlooking something. |
Putting an old Chrysler ballast resistor inline to the wiper motor works to keep the speed sane.
Don't forget the clock. |
Got a link for that resistor?
Tach in the clock hole so I'm good there... |
http://www.partsgeek.com/gbproducts/MC/14451-07038...Mgod6FkAYw _________________ Немає виправдання для війни! Я з Україною.
Bryan67 wrote: |
Just my hands. And a little lube. No tools. |
To best contact me, please use the EMAIL function in my profile |
|
Back to top |
|
|
Bobnotch Samba Member
Joined: July 06, 2003 Posts: 22431 Location: Kimball, Mi
|
Posted: Mon Aug 18, 2014 10:31 am Post subject: |
|
|
Depending on which 12 volt wiper motor you're using, you might have to add a seperate switch to control the wiper speed. I did that, when I converted my 64 T-34 to 12 volts. The push button unit then just becomes an on-off switch.
Also, IF your carbs have electric idle cut off jets, you'll need to swap them for 12 volt units. If you have the mechanical version, then you don't have to do anything with them. _________________ Bob 65 Notch S with Sunroof
71 Notch ...aka Krunchy; build pics here;
http://www.thesamba.com/vw/forum/viewtopic.php?t=249390 -been busy working
64 T-34 Ghia...aka Wolfie, under construction... http://www.thesamba.com/vw/forum/viewtopic.php?t=412120
Tram wrote: |
"Friends are God's way of apologizing for relatives." |
Tram wrote: |
People keep confusing "restored" and "restroyed". |
|
|
Back to top |
|
|
ataraxia Samba Member
Joined: March 19, 2010 Posts: 4504 Location: Illinois
|
Posted: Mon Aug 18, 2014 10:39 am Post subject: |
|
|
Tram wrote: |
ataraxia wrote: |
Tram wrote: |
ataraxia wrote: |
ron smith wrote: |
I been useing my pushbuttons in my 64 notch for the last 15 years and have no problems useing 12 volts. my wiper motor is still 6v and you just need to turn the switch to the slowest speed. |
Thanks for the input...I'd hate to roast the pushbutton assembly by overlooking something. |
Putting an old Chrysler ballast resistor inline to the wiper motor works to keep the speed sane.
Don't forget the clock. |
Got a link for that resistor?
Tach in the clock hole so I'm good there... |
http://www.partsgeek.com/gbproducts/MC/14451-07038...Mgod6FkAYw |
Thank you...where does it go in the system? Is this keeping both the pushbutton assembly and the 6 volt wiper motor or do I have to replace the wiper motor with a 12 volt unit? Trying to find the most useful, least involved method.
Bobnotch wrote: |
Depending on which 12 volt wiper motor you're using, you might have to add a seperate switch to control the wiper speed. I did that, when I converted my 64 T-34 to 12 volts. The push button unit then just becomes an on-off switch.
Also, IF your carbs have electric idle cut off jets, you'll need to swap them for 12 volt units. If you have the mechanical version, then you don't have to do anything with them. |
Single speed 12volt wiper motor (unless Tram's idea works better). The car isn't going to be driven in the rain all that often...although I like your idea.
Carbs don't have electric idle cut offs so I'm good there. |
|
Back to top |
|
|
Bobnotch Samba Member
Joined: July 06, 2003 Posts: 22431 Location: Kimball, Mi
|
Posted: Mon Aug 18, 2014 7:18 pm Post subject: |
|
|
ataraxia wrote: |
Tram wrote: |
ataraxia wrote: |
Tram wrote: |
ataraxia wrote: |
ron smith wrote: |
I been useing my pushbuttons in my 64 notch for the last 15 years and have no problems useing 12 volts. my wiper motor is still 6v and you just need to turn the switch to the slowest speed. |
Thanks for the input...I'd hate to roast the pushbutton assembly by overlooking something. |
Putting an old Chrysler ballast resistor inline to the wiper motor works to keep the speed sane.
Don't forget the clock. |
Got a link for that resistor?
Tach in the clock hole so I'm good there... |
http://www.partsgeek.com/gbproducts/MC/14451-07038...Mgod6FkAYw |
Thank you...where does it go in the system? Is this keeping both the pushbutton assembly and the 6 volt wiper motor or do I have to replace the wiper motor with a 12 volt unit? Trying to find the most useful, least involved method.
Bobnotch wrote: |
Depending on which 12 volt wiper motor you're using, you might have to add a seperate switch to control the wiper speed. I did that, when I converted my 64 T-34 to 12 volts. The push button unit then just becomes an on-off switch.
Also, IF your carbs have electric idle cut off jets, you'll need to swap them for 12 volt units. If you have the mechanical version, then you don't have to do anything with them. |
Single speed 12volt wiper motor (unless Tram's idea works better). The car isn't going to be driven in the rain all that often...although I like your idea.
Carbs don't have electric idle cut offs so I'm good there. |
Ok, so you're using the 67 only (12 volt variable speed) wiper motor? And not the 2 speed unit? If so, then it's just plug and play. If you have a 2 speed motor (68 to 70), then you'll need to add a 2 speed switch. _________________ Bob 65 Notch S with Sunroof
71 Notch ...aka Krunchy; build pics here;
http://www.thesamba.com/vw/forum/viewtopic.php?t=249390 -been busy working
64 T-34 Ghia...aka Wolfie, under construction... http://www.thesamba.com/vw/forum/viewtopic.php?t=412120
Tram wrote: |
"Friends are God's way of apologizing for relatives." |
Tram wrote: |
People keep confusing "restored" and "restroyed". |
|
|
Back to top |
|
|
ALLWAGONS Samba Member
Joined: June 03, 2000 Posts: 4190 Location: Pasadena CA/DTLA soon China
|
Posted: Mon Aug 18, 2014 9:22 pm Post subject: |
|
|
Don't mean to highjack thread, but what kind of relay did you use for the horn and foglights on your type 34, Bob?
Martin
allwagons _________________ I'd be UNSTOPPABLE if not for Law Enforcement and PHYSICS.
I recycle old cars and parts, other than when I rot, that's as Green as I am going to get.
Thanks to my Tesla driving neighbors, I feel more relaxed driving my SUBURBAN and old VW's.
NON INFLUENCER APPROVED |
|
Back to top |
|
|
Bobnotch Samba Member
Joined: July 06, 2003 Posts: 22431 Location: Kimball, Mi
|
Posted: Tue Aug 19, 2014 8:18 am Post subject: |
|
|
ALLWAGONS wrote: |
Don't mean to highjack thread, but what kind of relay did you use for the horn and foglights on your type 34, Bob?
Martin
allwagons |
Standard 12 volt Bosch relays from KGPR. I basically kept the wiring stock, and used the 12 volt relays with 12 volt components. Plug and play. I should mention that I had to zip tie the relays to the bracket, due to them being smaller, but it wasn't that big of deal. Remember, I still have the 6 volt components, that go with the car, so I didn't want to alter anything. _________________ Bob 65 Notch S with Sunroof
71 Notch ...aka Krunchy; build pics here;
http://www.thesamba.com/vw/forum/viewtopic.php?t=249390 -been busy working
64 T-34 Ghia...aka Wolfie, under construction... http://www.thesamba.com/vw/forum/viewtopic.php?t=412120
Tram wrote: |
"Friends are God's way of apologizing for relatives." |
Tram wrote: |
People keep confusing "restored" and "restroyed". |
|
|
Back to top |
|
|
ataraxia Samba Member
Joined: March 19, 2010 Posts: 4504 Location: Illinois
|
Posted: Thu Aug 21, 2014 7:18 am Post subject: |
|
|
Bobnotch wrote: |
ataraxia wrote: |
Tram wrote: |
ataraxia wrote: |
Tram wrote: |
ataraxia wrote: |
ron smith wrote: |
I been useing my pushbuttons in my 64 notch for the last 15 years and have no problems useing 12 volts. my wiper motor is still 6v and you just need to turn the switch to the slowest speed. |
Thanks for the input...I'd hate to roast the pushbutton assembly by overlooking something. |
Putting an old Chrysler ballast resistor inline to the wiper motor works to keep the speed sane.
Don't forget the clock. |
Got a link for that resistor?
Tach in the clock hole so I'm good there... |
http://www.partsgeek.com/gbproducts/MC/14451-07038...Mgod6FkAYw |
Thank you...where does it go in the system? Is this keeping both the pushbutton assembly and the 6 volt wiper motor or do I have to replace the wiper motor with a 12 volt unit? Trying to find the most useful, least involved method.
Bobnotch wrote: |
Depending on which 12 volt wiper motor you're using, you might have to add a seperate switch to control the wiper speed. I did that, when I converted my 64 T-34 to 12 volts. The push button unit then just becomes an on-off switch.
Also, IF your carbs have electric idle cut off jets, you'll need to swap them for 12 volt units. If you have the mechanical version, then you don't have to do anything with them. |
Single speed 12volt wiper motor (unless Tram's idea works better). The car isn't going to be driven in the rain all that often...although I like your idea.
Carbs don't have electric idle cut offs so I'm good there. |
Ok, so you're using the 67 only (12 volt variable speed) wiper motor? And not the 2 speed unit? If so, then it's just plug and play. If you have a 2 speed motor (68 to 70), then you'll need to add a 2 speed switch. |
Yes. 67 only wiper motor. I figured it's the easiest way to go if I have to pull the 6 volt motor out. |
|
Back to top |
|
|
Tram Samba Socialist
Joined: May 02, 2003 Posts: 22728 Location: Still Feelin' the Bern- Once you've felt it you can't un- feel it.
|
Posted: Thu Aug 21, 2014 9:27 am Post subject: |
|
|
ataraxia wrote: |
Tram wrote: |
ataraxia wrote: |
Tram wrote: |
ataraxia wrote: |
ron smith wrote: |
I been useing my pushbuttons in my 64 notch for the last 15 years and have no problems useing 12 volts. my wiper motor is still 6v and you just need to turn the switch to the slowest speed. |
Thanks for the input...I'd hate to roast the pushbutton assembly by overlooking something. |
Putting an old Chrysler ballast resistor inline to the wiper motor works to keep the speed sane.
Don't forget the clock. |
Got a link for that resistor?
Tach in the clock hole so I'm good there... |
http://www.partsgeek.com/gbproducts/MC/14451-07038...Mgod6FkAYw |
Thank you...where does it go in the system? Is this keeping both the pushbutton assembly and the 6 volt wiper motor or do I have to replace the wiper motor with a 12 volt unit? Trying to find the most useful, least involved method.
Bobnotch wrote: |
Depending on which 12 volt wiper motor you're using, you might have to add a seperate switch to control the wiper speed. I did that, when I converted my 64 T-34 to 12 volts. The push button unit then just becomes an on-off switch.
Also, IF your carbs have electric idle cut off jets, you'll need to swap them for 12 volt units. If you have the mechanical version, then you don't have to do anything with them. |
Single speed 12volt wiper motor (unless Tram's idea works better). The car isn't going to be driven in the rain all that often...although I like your idea.
Carbs don't have electric idle cut offs so I'm good there. |
It goes in the power supply wire to the wiper switch. That's it- no other changes. _________________ Немає виправдання для війни! Я з Україною.
Bryan67 wrote: |
Just my hands. And a little lube. No tools. |
To best contact me, please use the EMAIL function in my profile |
|
Back to top |
|
|
ataraxia Samba Member
Joined: March 19, 2010 Posts: 4504 Location: Illinois
|
Posted: Thu Aug 21, 2014 9:28 am Post subject: |
|
|
Tram wrote: |
ataraxia wrote: |
Tram wrote: |
ataraxia wrote: |
Tram wrote: |
ataraxia wrote: |
ron smith wrote: |
I been useing my pushbuttons in my 64 notch for the last 15 years and have no problems useing 12 volts. my wiper motor is still 6v and you just need to turn the switch to the slowest speed. |
Thanks for the input...I'd hate to roast the pushbutton assembly by overlooking something. |
Putting an old Chrysler ballast resistor inline to the wiper motor works to keep the speed sane.
Don't forget the clock. |
Got a link for that resistor?
Tach in the clock hole so I'm good there... |
http://www.partsgeek.com/gbproducts/MC/14451-07038...Mgod6FkAYw |
Thank you...where does it go in the system? Is this keeping both the pushbutton assembly and the 6 volt wiper motor or do I have to replace the wiper motor with a 12 volt unit? Trying to find the most useful, least involved method.
Bobnotch wrote: |
Depending on which 12 volt wiper motor you're using, you might have to add a seperate switch to control the wiper speed. I did that, when I converted my 64 T-34 to 12 volts. The push button unit then just becomes an on-off switch.
Also, IF your carbs have electric idle cut off jets, you'll need to swap them for 12 volt units. If you have the mechanical version, then you don't have to do anything with them. |
Single speed 12volt wiper motor (unless Tram's idea works better). The car isn't going to be driven in the rain all that often...although I like your idea.
Carbs don't have electric idle cut offs so I'm good there. |
It goes in the power supply wire to the wiper switch. That's it- no other changes. |
Hmmm...might be worth a try for $15. |
|
Back to top |
|
|
Tram Samba Socialist
Joined: May 02, 2003 Posts: 22728 Location: Still Feelin' the Bern- Once you've felt it you can't un- feel it.
|
Posted: Thu Aug 21, 2014 10:02 am Post subject: |
|
|
ataraxia wrote: |
Tram wrote: |
ataraxia wrote: |
Tram wrote: |
ataraxia wrote: |
Tram wrote: |
ataraxia wrote: |
ron smith wrote: |
I been useing my pushbuttons in my 64 notch for the last 15 years and have no problems useing 12 volts. my wiper motor is still 6v and you just need to turn the switch to the slowest speed. |
Thanks for the input...I'd hate to roast the pushbutton assembly by overlooking something. |
Putting an old Chrysler ballast resistor inline to the wiper motor works to keep the speed sane.
Don't forget the clock. |
Got a link for that resistor?
Tach in the clock hole so I'm good there... |
http://www.partsgeek.com/gbproducts/MC/14451-07038...Mgod6FkAYw |
Thank you...where does it go in the system? Is this keeping both the pushbutton assembly and the 6 volt wiper motor or do I have to replace the wiper motor with a 12 volt unit? Trying to find the most useful, least involved method.
Bobnotch wrote: |
Depending on which 12 volt wiper motor you're using, you might have to add a seperate switch to control the wiper speed. I did that, when I converted my 64 T-34 to 12 volts. The push button unit then just becomes an on-off switch.
Also, IF your carbs have electric idle cut off jets, you'll need to swap them for 12 volt units. If you have the mechanical version, then you don't have to do anything with them. |
Single speed 12volt wiper motor (unless Tram's idea works better). The car isn't going to be driven in the rain all that often...although I like your idea.
Carbs don't have electric idle cut offs so I'm good there. |
It goes in the power supply wire to the wiper switch. That's it- no other changes. |
Hmmm...might be worth a try for $15. |
Sure beats performing actual work in my book! Screw it to the firewall up under the dash- and if you really want to over engineer it, mount it to a heat sink first. _________________ Немає виправдання для війни! Я з Україною.
Bryan67 wrote: |
Just my hands. And a little lube. No tools. |
To best contact me, please use the EMAIL function in my profile |
|
Back to top |
|
|
Donnie strickland Samba Member
Joined: December 21, 2009 Posts: 2403 Location: Moody, AL
|
Posted: Thu Aug 21, 2014 10:08 am Post subject: |
|
|
I used this style on my Bug, and really liked it. You can adjust the speed down to really slow, if it's just drizzling...
_________________ 71 Elm Green FI A/T Squareback |
|
Back to top |
|
|
Bobnotch Samba Member
Joined: July 06, 2003 Posts: 22431 Location: Kimball, Mi
|
Posted: Thu Aug 21, 2014 11:29 am Post subject: |
|
|
Tram wrote: |
ataraxia wrote: |
Tram wrote: |
ataraxia wrote: |
Tram wrote: |
ataraxia wrote: |
Tram wrote: |
ataraxia wrote: |
ron smith wrote: |
I been useing my pushbuttons in my 64 notch for the last 15 years and have no problems useing 12 volts. my wiper motor is still 6v and you just need to turn the switch to the slowest speed. |
Thanks for the input...I'd hate to roast the pushbutton assembly by overlooking something. |
Putting an old Chrysler ballast resistor inline to the wiper motor works to keep the speed sane.
Don't forget the clock. |
Got a link for that resistor?
Tach in the clock hole so I'm good there... |
http://www.partsgeek.com/gbproducts/MC/14451-07038...Mgod6FkAYw |
Thank you...where does it go in the system? Is this keeping both the pushbutton assembly and the 6 volt wiper motor or do I have to replace the wiper motor with a 12 volt unit? Trying to find the most useful, least involved method.
Bobnotch wrote: |
Depending on which 12 volt wiper motor you're using, you might have to add a seperate switch to control the wiper speed. I did that, when I converted my 64 T-34 to 12 volts. The push button unit then just becomes an on-off switch.
Also, IF your carbs have electric idle cut off jets, you'll need to swap them for 12 volt units. If you have the mechanical version, then you don't have to do anything with them. |
Single speed 12volt wiper motor (unless Tram's idea works better). The car isn't going to be driven in the rain all that often...although I like your idea.
Carbs don't have electric idle cut offs so I'm good there. |
It goes in the power supply wire to the wiper switch. That's it- no other changes. |
Hmmm...might be worth a try for $15. |
Sure beats performing actual work in my book! Screw it to the firewall up under the dash- and if you really want to over engineer it, mount it to a heat sink first. |
If he's using the 12 volt single speed wiper motor, then he shouldn't need to install a voltage drop, should he? _________________ Bob 65 Notch S with Sunroof
71 Notch ...aka Krunchy; build pics here;
http://www.thesamba.com/vw/forum/viewtopic.php?t=249390 -been busy working
64 T-34 Ghia...aka Wolfie, under construction... http://www.thesamba.com/vw/forum/viewtopic.php?t=412120
Tram wrote: |
"Friends are God's way of apologizing for relatives." |
Tram wrote: |
People keep confusing "restored" and "restroyed". |
|
|
Back to top |
|
|
|