pondoras box Samba Member
Joined: March 22, 2004 Posts: 1227 Location: Eerie PA
|
Posted: Tue Sep 02, 2014 6:44 am Post subject: Brake identification help needed |
|
|
Hopefully someone with a lot more knowledge than me can help me identify what I have.
I purchased theses brakes with a set of front 944 brakes a while back. I didn't need the rears at the time so I just shelved them for a future project. Well that time is now.
I had incorrectly assumed they were 944 until I took the out to refurbish and quickly realized that they were not from a 944, so research quickly ruled out rear 914 and they don't quite look like 911 calipers I have found online due to a different design for the brake line mounting.
My end goal is to put these on the back of an early bus with a 1968 type 1 transaxle.
Any help would be greatly appreciated to see if they will work for my application and if so what rebuild kit do I purchase.
Still mounted to the aluminum swing arm
A few different angle
_________________ Looking for anything from Hal Casey Motors out of Hamburg New York, from license plate surrounds to matchbooks.
1961 23 Window (Bobo)
1965 11 Window (Zelda)
1965 13 Window (Lucas)
1957 Oval ragtop
1988 Cabriolet VR6 conversion
Plus a lot of other rusty junk |
|