Press in wheel studs

kielbasa · Posted: Tue Dec 02, 2014 12:11 pm Post subject: Press in wheel studs

I need press in wheel studs 12mmx1.5, 1.5" long. .580 knurl.

I've tried locally and online with no luck everything is too long and I'd prefer not to cut the studs. I would be happier if I could find one even shorter about 1.25" long from the bottom of the "head".

Anyone got an idea where to find these? Thanks
_________________
Gotta give my props to:
Wolfsburg Motorsports
Dubbers Toy Box
Jeff's VW Speed and Fab
4inbore.com
Kielbasa Industries

Mike Fisher · Posted: Tue Dec 02, 2014 12:45 pm Post subject:

DORMAN makes every conceivable bolt etc! I buy/order from my local Eugene Fastener.
_________________
https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold

Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey

kielbasa · Posted: Tue Dec 02, 2014 1:57 pm Post subject:

Couldn't find the size from Dorman. I either missed it or they don't have a shorty 12mm in .580
_________________
Gotta give my props to:
Wolfsburg Motorsports
Dubbers Toy Box
Jeff's VW Speed and Fab
4inbore.com
Kielbasa Industries

JasonBaker · Posted: Wed Dec 03, 2014 8:44 am Post subject:

Try John at toplineparts.com. When I switched to 5x130 he machined the rotors and installed press in studs.

kielbasa · Posted: Wed Dec 03, 2014 9:26 am Post subject:

I know john personally. He doesn't have anything that would work.
_________________
Gotta give my props to:
Wolfsburg Motorsports
Dubbers Toy Box
Jeff's VW Speed and Fab
4inbore.com
Kielbasa Industries


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> Custom Wheel/Tire	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1