Author |
Message |
splitpartsunlimited Samba Member
Joined: January 18, 2006 Posts: 1251 Location: Good Ol`Buenos Aires, Argentina
|
Posted: Wed Jan 14, 2015 7:24 am Post subject: 25hp head to cyl gasket dimensions . |
|
|
Hi Folks !
anybody knows the correct dimensions for the crush gasket ( copper/ asbestos) that fits between the head and the cylinder on a 25hp engine ?
a friend contacted BBT to purchase but after 4 emails never got an answer with prices and how to order , and another supplier says the inner dia for the gaskets are 84mm ......although the ext cylinder dia is 81.75 / 82 .....
anyone ?
thank you !
Ricardo _________________ in my Garage:
1951 crotch cooler split
1971 1302 cabriolet
1981 Mercedes Benz 230 military "Gelandewagen"
2010 Mercedes Benz c200 kompressor touring |
|
Back to top |
|
|
dlware1 Samba Member
Joined: August 16, 2007 Posts: 39
|
Posted: Wed Jan 14, 2015 10:18 pm Post subject: Re: 25hp head to cyl gasket dimensions . |
|
|
splitpartsunlimited wrote: |
Hi Folks !
anybody knows the correct dimensions for the crush gasket ( copper/ asbestos) that fits between the head and the cylinder on a 25hp engine ?
a friend contacted BBT to purchase but after 4 emails never got an answer with prices and how to order , and another supplier says the inner dia for the gaskets are 84mm ......although the ext cylinder dia is 81.75 / 82 .....
anyone ?
thank you !
Ricardo |
The 25hp "crush rings" I have all measure 82mm inner and 87.6 - 87.8mm outer diameter. (According to PR, ring gaskets were not used for head to cylinder before #1-0140243 January 1950). |
|
Back to top |
|
|
splitpartsunlimited Samba Member
Joined: January 18, 2006 Posts: 1251 Location: Good Ol`Buenos Aires, Argentina
|
Posted: Thu Jan 15, 2015 3:29 am Post subject: |
|
|
Have you got some to sell ?? _________________ in my Garage:
1951 crotch cooler split
1971 1302 cabriolet
1981 Mercedes Benz 230 military "Gelandewagen"
2010 Mercedes Benz c200 kompressor touring |
|
Back to top |
|
|
|