What Duel Manifolds fit Manx's?

langan · Posted: Sun Feb 22, 2015 5:46 pm Post subject: What Duel Manifolds fit Manx's?

It was suggested I post here. I have a Manx2 on a stock pan ( not rasied or lowered ) I want to install duel Weber 2 barrel type carbs not single barrel Kadrons.
Hopping to find out what manifold fit? Off-sets, type 3, or? Maybe some picyures Thanks

Glenn · Posted: Sun Feb 22, 2015 6:13 pm Post subject:

Not sure but Type 3 are the shortest which will give you the most clearance.
_________________
Glenn
74 Beetle Specs | 74 Beetle Restoration | 2180cc Engine
"You may not get what you pay for, but you always pay for what you get"

Member #1009

#BlueSquare

wythac · Samba Member Joined: August 02, 2004 Posts: 2791

Image may have been reduced in size. Click image to view fullscreen.

Berg ones are pretty compact. Even with a 3" lift I take them off before taking the motor out.

langan · Posted: Wed Feb 25, 2015 11:26 am Post subject:

Ordered off-sets from CB performance and a base line jets will post results.

langan · Posted: Sun Jun 28, 2015 9:47 pm Post subject:

Did the off set type of manifold un ported and only had some 40's for my 2054 ran great. But decided to use them on my 1641 we will see? I bought a pair of 48 IDF's for the 2180 I am building and installed them just the way they came out of box with the ported manifolds that matched heads( they fit ). They run real good


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

Forum Index -> Kit Car/Fiberglass Buggy/356 Replica		Share:
		Print View

	Forum Index -> Kit Car/Fiberglass Buggy/356 Replica	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1