| Author |
Message |
greasemonkey
Samba Member
Joined: November 18, 2004
Posts: 4
|
 Posted: Mon Mar 02, 2015 6:10 pm Post subject: convertible support gussets |
 |
|
| I am planning on doing floor pans on my 67 vert beetle soon. I notice that the convertible support braces are not in the best shape. Anyone know of a place that make repro support gussets or will I just have to try to cut them from a cleaner clip?? These are the gussets around the a and b pillars. Not support rails |
|
| Back to top |
|
 |
far rider 
Samba Member
Joined: August 30, 2005
Posts: 773
Location: Rutland, VT
|
| Posted: Mon Mar 02, 2015 8:22 pm Post subject: |
|
|
Not reproduced. You'll have to make your own. I'm working on a 63. What I did after removing the pieces from the car was to cut away the rusty areas and weld on new replacements (of the cut away sections). This way there is less to try and fabricate.
Convertibles are a lot more work to restore than a bug. Good luck.
_________________
67 zenith blue sunroof
Contentment; when what you have is what you want. |
|
| Back to top |
|
|
|
