| Author |
Message |
madman4
Samba Member
Joined: December 07, 2004
Posts: 13
Location: FRANCE
|
 Posted: Mon Jul 06, 2015 4:51 pm Post subject: 914 Differential in 901/02 trans |
 |
|
Hi,
Could I install a 914 differential to replace de bad one in my 901/02 ?
The left bearing had turned around the diff ...
Or could you give me the part number of the diff, I was not able to find it ...
Thanks
Pat
_________________
Have a right Foot ???
USE IT !!!
[color=6633FF]MON BLOG !!![/color] |
|
| Back to top |
|
 |
gears
Samba Member
Joined: October 28, 2002
Posts: 4391
Location: Tamarack, Bend, Kailua
|
| Posted: Wed Jul 08, 2015 5:59 pm Post subject: |
|
|
Is that 45mm or 50mm? (the burned bearing flange)
Early 901 is 45 mm. 914 is 50mm.
_________________
aka Pablo, Geary
9.36 @ 146 in '86 Hot & Sticky
'90 Syncro Westy SVX
'87 Syncro GL 2.5
https://guardtransaxle.com |
|
| Back to top |
|
|
madman4
Samba Member
Joined: December 07, 2004
Posts: 13
Location: FRANCE
|
| Posted: Thu Jul 09, 2015 5:15 am Post subject: |
|
|
| gears wrote: |
Is that 45mm or 50mm? (the burned bearing flange)
Early 901 is 45 mm. 914 is 50mm. |
Thx for your replay Ray.
it's 45mm.
But the bearing was a LM603049, Id45.24mm, may be the problem was here ?
I dont find any bearing that match Id50mm with the OD of 77.79mm of the LM603049 ...
What are the real size of the bearing for the early 901 diff ?
Thx
Pat
_________________
Have a right Foot ???
USE IT !!!
[color=6633FF]MON BLOG !!![/color] |
|
| Back to top |
|
|
gears
Samba Member
Joined: October 28, 2002
Posts: 4391
Location: Tamarack, Bend, Kailua
|
| Posted: Thu Jul 09, 2015 6:50 am Post subject: |
|
|
I have none of it in my hand, but early 901 is 45mm, while 914 (and late 901) are 50mm. So no, the 914 diff won't fit your early 901. Something sounds odd with that bearing ID size ..
_________________
aka Pablo, Geary
9.36 @ 146 in '86 Hot & Sticky
'90 Syncro Westy SVX
'87 Syncro GL 2.5
https://guardtransaxle.com |
|
| Back to top |
|
|
madman4
Samba Member
Joined: December 07, 2004
Posts: 13
Location: FRANCE
|
| Posted: Thu Jul 09, 2015 7:00 am Post subject: |
|
|
This si what I thought ...
Yep something is wrong but the od in the side plate is 77,80mm.
And the only bearing available here in Europe with 77,79od is 45,24id ...
_________________
Have a right Foot ???
USE IT !!!
[color=6633FF]MON BLOG !!![/color] |
|
| Back to top |
|
|
|
