Valve Adjustment 1.4 Rockers

dentfreeimage · Posted: Sat Aug 01, 2015 9:08 pm Post subject: Valve Adjustment 1.4 Rockers

Hello everyone, I just upgraded to 1.4 rockers with lash caps and will like to know what is the recommended valve adjustment. Also I am using chromoly push rods, I use to run .002 with the 1.1 rockers.
I greatly appreciate the advice!

fivelugshortaxle · Posted: Sun Aug 02, 2015 1:32 am Post subject:

The rockers have not crap to do with valve adjustments. .006 with aluminum pushrods. Loose zero with chromoly.
_________________
Good things come to those who wait.
2332 with lots of goodies....
Rotating assembly balanced by Brothers VW
4340 84mm crank
AA 94mm p&c' s
Total seal 2nd ring, rest are Grants
5.5 h beams
Magnum straight cuts
Steve Long XR310 on a 106
CB 1.4 rockers
CB Magnaspark 2 distributor
NGK D7ea plugs
A1 lowdown 1 3/4 with single muffler
Dellorto 48's with 40 venturies
Kennedy Stage 2 with Daiken disc

mark tucker · Posted: Sun Aug 02, 2015 2:34 am Post subject:

yes lug they do....... but zero works for most just fine on vw stuff

dentfreeimage · Posted: Sun Aug 02, 2015 6:30 am Post subject:

Great, thanks for the help. Just making sure they are no changes by upgrading the rockers.

dentfreeimage · Posted: Sun Aug 02, 2015 6:30 am Post subject:

Great, thanks for the help. Just making sure they are no changes by upgrading the rockers.

mark tucker · Posted: Sun Aug 02, 2015 9:25 am Post subject:

just be sure the geo is close.

Ebel · Posted: Sun Aug 02, 2015 2:12 pm Post subject:

Did you change the pushrods at the same time? I'm guessing its a stock cam if your going from 1.1 to 1.4. But I think no matter what you would need shorter pushrods.


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

Forum Index -> Performance/Engines/Transmissions		Share:
		Print View

	Forum Index -> Performance/Engines/Transmissions	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1