Author |
Message |
LR Pat Samba Member
Joined: July 09, 2015 Posts: 7 Location: Beaumont Texas
|
Posted: Tue Sep 29, 2015 1:40 am Post subject: Modification |
|
|
Is it possible to convert mid engine sand rail to a rear engine, how much work, and money would be involved ? |
|
Back to top |
|
|
Dale M. Samba Member
Joined: April 12, 2006 Posts: 20379 Location: Just a tiny bit west of Yosemite Valley
|
Posted: Tue Sep 29, 2015 5:08 am Post subject: |
|
|
Would there be good reason for this... Mid engine is about best solution for traction and performance.... About only thing you would gain would be "wheelie" factor becasue of engine hanging out back as a counter balance....
But yes you MIGHT be able to do it... A lot will depend on what type suspension you have and if you have "flipped" ring gear in transaxle and you are willing to do some frame mods.... As for cost, you will not know that factor till project is complete... There is no way to estimate a price and stay withing that budget when doing this sort of mod...
Dale _________________ “Fear The Government That Wants To Take Your Guns" - Thomas Jefferson.
"Kellison Sand Piper Roadster" For Street & Show.
"Joe Pody Sandrover" Buggy with 2180 for Autocross (Sold)
============================================================
All suggestions and advice are purely my own opinion. You are free to ignore them if you wish ... |
|
Back to top |
|
|
SamT Samba Member
Joined: April 17, 2009 Posts: 1761 Location: Rule, Tx
|
Posted: Tue Sep 29, 2015 6:29 am Post subject: |
|
|
Ive seen a few long midengine rails that the front tires would plow into a dune that was steep and loose. If you play at Kermit, Tx they don't do so hot out there.
do you have fab skills? if so you may spend very little money converting.
It all depends on if you can flip your own ring gear back, weld your own tabs, ect. You can sell the mid engine shifter for more than it will cost you in parts.
If you have to pay someone its going to cost you $500 minimum in labor. |
|
Back to top |
|
|
TDCTDI Samba Advocatus Diaboli
Joined: August 31, 2013 Posts: 12856 Location: North Carolina
|
Posted: Tue Sep 29, 2015 7:12 am Post subject: |
|
|
I'm unsure of the condition of your rail, but you might be able to buy a standard frame kit & build it the way you want it, sell your car & buy another or trade your car for a rear engine car. _________________ Everybody born before 1975 has a story, good, bad, or indifferent, about a VW.
GOFUNDYOURSELF, quit asking everyone to do it for you!
An air cooled VW will make you a hoarder.
Do something, anything, to your project every day, and you will eventually complete it. |
|
Back to top |
|
|
LR Pat Samba Member
Joined: July 09, 2015 Posts: 7 Location: Beaumont Texas
|
Posted: Tue Sep 29, 2015 7:35 am Post subject: |
|
|
Thanks for the replies ! |
|
Back to top |
|
|
ponyboy88 Samba Member
Joined: June 16, 2008 Posts: 214 Location: new york
|
Posted: Wed Sep 30, 2015 8:38 am Post subject: |
|
|
photos? kinda curious what it looks like? _________________ 1970 Baja Bug. |
|
Back to top |
|
|
|