"resivoir dogs"

greggy · Posted: Wed Jun 22, 2016 12:28 pm Post subject: "resivoir dogs"

Im using a master cylinder with the resivoir mounted on top. I was bleed the brakes last night, went to top off the resivoir and noticed it would spin. Its not loose it just spins. Before I go any further bleeding, does anyone elses do this? Don't want to keep bleeding if its just letting in air...thanks

B Ramsey · Posted: Wed Jun 22, 2016 1:34 pm Post subject: Re: "resivoir dogs"

Does air get in the reservoir when you take the cap off?
_________________
Go outside and do something.

greggy · Posted: Wed Jun 22, 2016 1:48 pm Post subject: Re: "resivoir dogs"

Doesn't seem to

corradolvr · Posted: Wed Jun 22, 2016 2:47 pm Post subject: Re: "resivoir dogs"

I guess if it's not leaking fluid at the interface and you keep the fluid level up, you wouldn't get any air in the system.
_________________
My Build Post
http://www.thesamba.com/vw/forum/viewtopic.php?t=3...highlight=

weasel_ugs · Posted: Wed Jun 22, 2016 7:16 pm Post subject: Re: "resivoir dogs"

Mine did that, started leaking a little while later.

greggy · Posted: Thu Jun 23, 2016 10:55 am Post subject: Re: "resivoir dogs"

Well I suppose I should probably just change it then. Thanks for the replys

ORANGECRUSHer · Posted: Thu Jun 23, 2016 11:59 am Post subject: Re: "resivoir dogs"

you might be able to just pick up new grommets/seals if your res is in good shape.
_________________
Brian H.
I may not know everything,but I will try to help if I can
OrangeCrushER Berrien Warrior 2.4L Quad4
LAZY MARY 1970 Baja ~~1835cc~~

weasel_ugs · Posted: Thu Jun 23, 2016 6:19 pm Post subject: Re: "resivoir dogs"

Once mine started spinning the plastic was spinning where its bonded to the metal base, there wasnt a seal to replace.

At least thats how mine was made.


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> HBB Off-Road	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1