Spring Plates & Torsions Bars Problem

[kELU]

Hi,
I would to change my spring plate to adjustable ones.
No problem to remove torsions bars from the bus but the main problem at the moment is that I can't separate spring plate from torsion bar ... Very rusty. Someone have an idea, except the hammer one (I already have try it) to separate them ?
Thanks
k.

[campingbox]

Use a shop press.

[kELU]

Hi,
Thanks for the solution.
I'll try to find one near home.
Is it a safe solution for the spring plate ?
Thanks
k.

[Scotty]

They're probably a little rusted together. It won't take much effort to get them apart using a press
_________________

[kELU]

Hi,
There were very very rusty ... 25T for one and 20T for the other to separate them ...
But it's done, cool