Author |
Message |
elewis Samba Member
Joined: May 25, 2004 Posts: 27 Location: Salt Lake City, Utah
|
Posted: Fri Jun 18, 2004 1:29 pm Post subject: Full-flow filter location |
|
|
Done a few searches here about full-flow filters but didn't find quite what I was looking for - so here goes.
What is the best location for a full-flow filter on a baja? I won't be running an external cooler - sticking with stock on that.
Are there kits for the plumbing that anyone would recommend? Or do you just get the pieces/parts together yourself to fit your install? If you have to piece it together anyone got recommendations on suppliers for good strong hose and fittings? _________________ Earl
73 SB
83 Mexibug
==============
2BS2B1 (2 bugs - soon to be 1) |
|
Back to top |
|
|
Nicksan Samba Member
Joined: April 13, 2004 Posts: 2777
|
Posted: Fri Jun 18, 2004 9:29 pm Post subject: |
|
|
The kits are easiest. I forget the name (perma-something) but you can get the cooler with the remote filter mount and hardware. I have external cooling and filter . My filter mount is mounted on the rear fiberglass cowling below the rear window. |
|
Back to top |
|
|
HamburgerBrad Je suis Napoléon!
Joined: February 21, 2003 Posts: 6957 Location: SoCal
|
Posted: Tue Jun 22, 2004 3:51 pm Post subject: |
|
|
i would mount the filter or cooler to a solid point, like the firewall or some other bulkhead of the car that you havent cut off yet _________________ OGST | CU05 | OGJHC
1970 baja|1953 oval
Wanted: two beat up, ugly, curb rashed 6" phone dial wheels |
|
Back to top |
|
|
|