'68 - '79 Bus long ABS panel Driver side B&G Price: $70 /$80 + shipping
Black or now, our custom made GREY ABS Plastic
1968 – 1979 VW Bus Driver Side LONG panel BLACK ABS Plastic with reusable (don’t over tighten them) Black Molly fasteners.
Part #: 33-460-68/79 (without arm rest holes) Price: $70 with 22x fasteners
Part #: 33-460-68/79A (with arm rest holes) Price: $70 with 22x fasteners
Part #: G33-460-68/79 (without arm rest holes) Price: $80 with 22x fasteners
Part #: G33-460-68/79A (with arm rest holes) Price: $80 with 22x fasteners
USA Shipping: UPS shipping only, custom boxing $35 (I will combine similar flat products together for shipping discount) but with these extra large packages, UPS adds a surcharge.
Calif. Sales tax (if you live in Calif. only): $5.70
The very popular, indestructible Long panel made out of .125” ABS plastic which never falls apart form the moisture in the air or the vinyl peels off from inside heat, or vinyl tear from something bumping into them… might just out last your VW Bus if properly care for.
Clean with soap & water or plastic type cleaners like from a motorcycle shop / face shield plastic wax.
Can be painted with Krylon Fusion plastics spray paint:
First use the included test ABS scrap piece to practice on it.
Clean the ABS with rubbing alcohol to remove any mold releases and hand grease
Let them to fully dry (if you want the best paint job, then take them to a body shop for them to Bull Dog primer and paint them with flex additive paints)
Then spray them with Krylon Fusion plastic spray paint
Let them full dry before handling & installing them…..
The ABS plastic Long panel can also be upholstery too by sanding the surface with 36 grit sand paper, spray contact cement on both ABS panel & the material back side, let it tack up and apply them together just like normal upholstery process. Maybe even your original Long Panel Vinyl covers too, but my Long panel is shorter than the OEM and the DS rear seat panel is longer to make up the difference.
Included are 22+ special reusable black plastic Mollys (2x larger glossy Mollys for the larger OEM holes in the upper center of the panel, will be under the arm rest if you buy the panel with the arm rest holes). No need for drilling holes in the body for these Pins line up with the factory punched in holes already in the body (that is why it looks like the long panel & rear seat ¼ fasteners are off…).
All products include the necessary hardware: 22+ Black reusable (do not over tighten them) Mollys
For USPS mailed orders:
USPS Money order or check (held until it clears the bank before shipping the order):
7760 E. State Route #69
Prescott Valley, Az 86314-2201
Copy, fill this out & paste it in the “message section” at PayPal [email protected]
Part # 33-460-68/79 or 33-460-68/79A / G33-460-68/79 or G33-460-68/79A
Area code & Phone Number:
Any special instructions:
Thank you for buying Werksberg Products… products that work!
Made in America by Americans for the world!
Local pick up by appointment with cash in Prescott Valley, Az. only
Monkey Nut Vw (704) 598-6219 – 4221-A Joe St., Charlotte, N.C. 28206
Werksberg Products...products that work!
Paypal: [email protected]
M/O, or check...will be held until they clear before shipping..... In AZ now!