1964 - 1967 Driver's side LONG ABS Interior panel Price: $65 plus shipping
1964 – 1967 (may fit earlier up thru '63 Bus but until I test fit an earlier Bus) VW Bus LONG PANEL in BLACK on now GREY ABS Plastic (can be painted or covered) with 1/8" Black Oxide Sheet Metal screws
30 3/4" tall
(you will also need Part # 30-465-67 Rear Seat 1/4's too, this long panel and rear seat together as 1x piece will be a PITA to make and local pick up only IF I get to them as too long to ship)
Black Part number:
USA Shipping: UPS shipping only, custom boxing $35
(I will combine similar flat products together for shipping discount)
Calif. Sales tax (if you live in Calif. only): $5.70 / $6.25
LONG panel made out of .090” Black or GREY ABS plastic which never falls apart from the moisture in the air or the vinyl peels off from inside heat or vinyl tear from something bumping into them… might just outlast your VW Bus if properly care for.
Clean with soap & water or plastic type cleaners like from a motorcycle shop / face shield plastic wax.
Can be painted with Krylon Fusion plastics spray paint:
First use the included test ABS scrap piece to practice on it.
Clean the ABS with rubbing alcohol to remove any mold releases and hand grease
Let them to fully dry (if you want the best paint job, then take them to a body shop for them to Bull Dog primer and paint them with flex additive paints)
Then spray them with Krylon Fusion plastic spray paint
Let them fully dry before handling & installing them…..
The ABS plastic LONG panel can also be upholstery too by sanding the surface with 36 grit sand paper, spray contact cement on both ABS panel & the material back side, let it tack up and apply them together just like normal upholstery process. If you cover these panels, you will need to trim the panel gap for the added material.
Included are Black Oxide sheet metal screws. Since the VW factory workers random drilled the attachment holes for panels in these Buses, you will need to drill 1/8" holes thru the ABS panel holes to attach the panel.
I could on special order to have without drilled holes in the ABS panels but give a week or two extra as it would have to be a one off panels.
For USPS mailed orders:
USPS Money order or check (held until it clears the bank before shipping the order):
PO Box 931
Garden Grove, Ca. 92842-0931
Fill these questions out & paste it in the “message section” at Paypal [email protected] :
Part # 30-460-67 or G30-460-67
Area code & Phone Number:
Any special instructions:
Thank you for buying Werksberg Products… products that work!
Made in America by Americans for the world!
Local pick up by appointment only or here’s a list of Werksberg dealers (but the non Local So. Calif. dealers have to pay shipping charges so their prices might include that…) but most dealers will have to special order them:
No local pick up (unless by appointment and cash) but here’s a list of Werksberg dealers (but the non Local So. Calif. dealers have to pay shipping charges so their prices might include that…)
PierSide Parts Unltd. (714) 848-8868 – 17031 Newland St., Huntington Beach, Ca. 92647
Monkey Nut Vw (704) 598-6219 – 4221-A Joe St., Charlotte, N.C. 28206
Out of the USA:
EVAM CLASSIC / VW SPLIT PARTS +316-55918345 - Edisonweg 13-C, 3442 AC Woerden, The Netherlands
Werksberg Products...products that work!
Paypal: [email protected]
M/O, or check...will be held until they clear before shipping.....
February 08, 2005
Ad last edited:
Garden Grove, California, USA Map it
Sat Feb 18, 2012 9:19 pm
Sat Nov 18, 2017 10:58 am
Sun Aug 13, 2017 3:11 pm
Parts - Type 2/Bus - 1949-67
Money order/Bank check
Watch this ad |
Watch this seller