Hello! Log in or Register   |  Help  |  Donate  |  Buy Shirts  See all banner ads | Advertise on TheSamba.com  
Classifieds Index -> Parts -> High Performance/Engine
Billet type 1 heads 94mm or 101.6mm - Bare Turn on always show all large photos     Ad id: 2200799
Additional Photos
Click to load image
L & R arrow keys scroll through photos
Photo Photo Photo
Photo Photo Photo
Photo Photo Photo
Photo Photo Photo
Photo Photo Photo
Photo Photo Photo
Billet type 1 heads 94mm or 101.6mm - Bare   Price: 2600
I can offer at atleast two pairs of bare custom billet heads because I am planning to order my own billet heads at end of the year from Elmer Racing.

I have been in contact with them and i like their quality, good communications and relatively fast turnaround. Also they have experience on cylinderheads too. Heads at the pictures are from OTHER company.


Only problem is that i would need order atleast 3 pairs of cylinder heads at same time, including my heads, to get the price for pair under 2300. Obviosly 4 pairs is cheaper :) I know the heads are expensive but currently there is no money made selling them yet.

They do accept 50% payment before payment. Heads can be paid to them directly with Paypal or Moneytransfer. If you are not EU citizen, i can ship the heads to you, ask.

Here is more information about heads:

-Heads accept up to 54x40 valves with Pauter rockers due to wider valvecover flange

-I can offer either bail or bolt-on billet valvecovers at 315/pair. These will be made by my friend.

-Port sizes have been calculated and ports have very little work to be done after seat installation.

-10 x 2mm thick mainfins and 9 x 2mm thick fins over exhaust ports, big advantange on street driven engines

-Heads have through holes for cooling between ports

-Ports have good size short side radius and very little porting to be done after seat installation

-Port inner diameter at valve end is about 0,87 x valvesize and opening at top end is about 0,9 x valvesize.

-NGK D8EA sparkplugs with M12x1.25 threads fit

-Valveseat bores can machined at same price.

-I recommend 117mm long valves (type 4 etc)

-Standard 12mm valveguides fit.

At end of this year, heads at pictures will go the headporter to get finished and for flowbench testing.

Current model has had some updates after prototype, fin shape to fit with modified stock tins, port shape, valvetrain geometry etc.

Heads available with these confiqurations:

-94mm bore ports for 48x38 valves

-101.6mm bore ports for 48x38 or 54x40 valves

-94mm version has about 50-53cc chambers

-101.6mm version has about 55-58cc chambers

101.6 bore with 54x40 valves has larger valvespacing than 48x38 versions.

Feel free to ask more, email me or PM.

Shipping the heads to USA is 155

Here is Euro to USD exchange ratio chart, Euro is now cheap:

Advertiser information Ad information
Member since:
Alex Storskrubb
December 09, 2008
Contact advertiser

Phone: Click to Show

Email this Advertiser
Email this Advertiser
Ad placed: 
Ad renewed: 
Ad last edited: 
Payments accepted: 
Kalajoki, Finland, Finland
Thu Aug 09, 2018 7:40 am
Sat Mar 23, 2019 5:28 am
Sat Mar 23, 2019 8:16 am
Parts - High Performance/Engine
Bank wire transfer

View other ads View profile Search for Feedback Watch this ad | Report this Ad
Watch this seller Share: Email Facebook Twitter
Other ads from -Alex77-
See all | See ads in this category
Lasercut 1300/1302/1303/1800 RS texts
Lasercut 1300/1302/1303/1800 RS texts

About | Help | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2018, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB