CHOPPED Squareback Race Car - WHOLE OR PARTING OUT Price: 6000
Time has come to let my project race car go. I have called it BLACK OPS. This is a 1969 (have title in hand) 5" chopped squareback. All the fenders, doors and apron are removable and made of fiberglass. The front is mounted to a custom tilt assembly, but can be removed.
The headlights and taillights are on quick disconnects to facilitate removal of the front clip and rear fenders quicker.
The front suspnsion is a JT aluminum beam that has been narrowed 3 inches. Includes adjusters and 2" drop spindles. Front wheels are solid spindle type with M&H front runners
The rear suspension is IRS and narrowed 3" on both sides. This has allowed the fitment of 8.5x26 - 15 tires under stock width fenders WITHOUT cutting the opening. Rear wheels are CMS 205mm bolt pattern. The brakes are Tatum 4 piston calipers with stock axle shafts modified to m 930 CVs. Also, the torsion adjusters have been mounted on the inboard side. Accessible from under the car. This allows more clearance at the torsion palate.
The current set-up for the trans is for an 002 5-rib with mid carrier bracket.
The pan halves were replaced with flat sheet metal and a full cage installed ALL CHROMOLY. The cage is tied into the front suspension and to the rear torsion housing and transmission.
The steering is mounted to the cross shaft with a tilt column (ease of exiting) and a quick disconnect for the wheel.
All electrical was installed, but I will be keeping the gauges, tach and MSD. Taillights and headlights will stay with the car.
NO MOTOR OR TRANSMISSION - ONLY A ROLLER
Well, it has been several months and I still need to let my project go to a good home, but there just has not been any great interest. As much as I do not want to, I will part this out. I will offer the following:
*Tube Chassis/Pan for T3 (SQRBK/FSTBK/NTCHBK)
Mounts a Link pin front; has torsions adjusters on rear; raised about 4"; cage can be cert. for 8.50 (all chromoly) $3,000 OBO
*IRS Trailing arms with 930 CV flanged axles (narrowed 3") $400 OBO
*Disc brakes 4 Piston (large 5 lug) $400 OBO
*Front T3 Fiberglass clip mounted; never trimmed with wired headlights
(MARK V) $400 OBO (new ones are $600+)
*Rear T3 fiberglass apron $60 OBO
*Rear Fiberglass fenders with tailights $400 OBO
*Chopped Squareback Body with Fiberglass doors and latches $1500 OBO
*JAZ aluminum race seat (17" wide/ with cover) $100 OBO
If you desire more pictures or information, please let me know.