CHOPPED Squareback Race Car - Price: 123456
This car is still available and I have become increasingly motivated to sell, but will not give it away. So if you have an interest, contact me and let's negotiate.
Time has come to let my project race car go. I have called it BLACK OPS. This is a 1969 (have title in hand) 5" chopped squareback. All the fenders and doors are removable and made of fiberglass. The front is mounted to a custom tilt assembly, but can be removed.
The headlights and taillights are on quick disconnects to facilitate removal of the front clip and rear fenders quicker.
The front suspnsion is a JT aluminum beam that has been narrowed 3 inches. Includes adjusters and 2" drop spindles. Front wheels are solid spindle type with M&H front runners
The rear suspension is IRS and narrowed 3" on both sides. This has allowed the fitment of 8.5x26 - 15 tires under stock width fenders WITHOUT cutting the opening. Rear wheels are CMS 205mm bolt pattern. The brakes are Tatum 4 piston calipers with stock axle shafts modified to m 930 CVs. Also, the torsion adjusters have been mounted on the inboard side. Accessible from under the car. This allows more clearance at the torsion palate.
The current set-up for the trans is for an 002 5-rib with mid carrier bracket. I have the trans and looking to sell. Build by Rancho.
The pan halves were replaced with flat sheet metal and a full cage installed ALL CHROMOLY. The cage is tied into the front suspension and to the rear torsion housing and transmission.
The steering is mounted to the cross shaft with a tilt column (ease of exiting) and a quick disconnect for the wheel.
I will be keeping the gauges, tach and MSD. Taillights and headlights will stay with the car.
ONLY A ROLLER, but may be swayed to make a package deal with the motor and trans.
Motor: 2387cc too many parts to list here, but has many top end parts and ready to run. Car will include a stainless Turbo header to mount the turboo up over the trans.
Trans built by Rancho equiped with spool, midcarrier housing for T1 nose cone and 930 CVs
Have a new never used T3/T4 turbo build by Shag Leone and a Holley 750 4 brl tuned for the car.
You could not build the rolling car for what I am asking and the motor and trans I would be losing more than 50% of the cost put into it.
I am looking to make a smoking deal to the right person with cash. Contact me to inspect the car and discuss in detail.
Interested persons should contact me to discuss.