|
|
NEW Engle VZ15 Type 1 Camshaft, for 1.1 Rockers Price: 165 SHIPPED
|
The Engle VZ15 is a Stump Pulling cam for Off-Road engines. It is designed for 1.1 rockers ONLY. Specs are .435" Cam Lift, .478" Valve Lift (1.1 Rockers) 279 degrees of advertised duration, and 250 degrees of duration at .050", on a 108 Lobe Center.
The VZ Series of cams have a short valvetrain life due to super-fast ramps and high valve lift. Dual Springs are required! This is an ultimate grind for guys that want both low end and top end! This was specifically designed by Engle for 1200-1700cc off-road and short course racing classes with limited carburetion. You can also use it for really heavy sedans, but remember the valvetrain noise and valvetrain life! This cam runs from idle to 5500 RPM.
Works best with Compression from 8-8:25:1.
_________________
If you buy multiple items, as for a discount to go in the same box, I will see what I can do.
Please pay via Venmo to "Canada-Banana", last 4 ph # digits are "0206".
OR you can pay via Paypal (Friends and family), to "[email protected]"
Please send a note with what you are purchasing, along with your shipping address.
|
|
|
|
Other ads from mattmcvw
See all | See ads in this category
|
CB Performance REAR Disc Brake Kit, 4630
|
EMPI 9606 7/8 Sway Bar, 55-67 Type 2 FRONT
|
M6x1mm Big-sert Thread Repair Kit - USED
|
CB Performance DROPPED Front Disc Brake Kit, 4178
|
NEW BUGGY MATS, PAIR, REAR, FREE SHIP
|
|
|
|
