|
Additional Photos Click to load image
L & R arrow keys scroll through photos |
My bushings shown in brown |
Paul's '65 in Ohio - 6" beam |
Aurelio's '62 in FL - 6" Beam |
Towered beam installed. Shock dust cover removed for clearance. |
Full 5+ inch range of adjustment! |
|
|
|
Full setup including built dropped spindles and my bushings in Green. |
|
My in house made Valle-Tec bushings! |
Find me on Instagram - @Slowlow_VW |
|
|
|
'65 in Indiana with one of my 4" Beams |
'58 in Reno with one of my 6" Beams. Owned by the mythical Chase/ Cage66 |
|
|
100% New, Scratchbuilt Narrowed Linkpin Beams Price: $250 and up
|
- - -100% NEW Narrowed Adjustable Linkpin Type I Beams - - - -
Narrowed 2"- 8"depending on your needs
Built here, in my shop, on my table, by me! Now featuring my in house produced beam bushings, 100% made in the USA!
See details and order here:
http://valleyautowerks-com.3dcartstores.com/_p_14.html
These beams are 100% NEW metal and DOM tubing. Completely jig built and test fitted before shipment, to avoid headaches on your end!
No body modifications required to fit these beams up to 8" narrowed. I can also build up to 4" Narrowed beam with shock towers with NO modifications as well!
*Please note, 4" beams do have stepped towers for better wheel well clearance, but if your car has been bumped in the past, it still may be tight.
- LinkPin, pre- 66
includes:
Parts and labor
NEW DOM Tubing Beam narrowed to your specifications
Drilled and tapped for grease fittings
CNC'd side plates
CNC'd steering damper mount
Custom made frame head mounts, with under tank bolt inserts.
Two NEW adjusters installed seamlessly, NO cut tubes!
New set of my in house produced, Valle-Tec beam bushings! Available in various colors too.
Jig built and test fitted before shipment
New, thick Tie-rod tubes narrowed to match, one piece! Not cut and welded!
NEW set of four tie-rod ends *
Narrowed and re-dimpled torsion springs**
*The torsion fee gets you a set of torsions, clean, cut, dimpled and installed..
Send your springs in, cleaned up and I will narrow/ dimple and install them, OR if you have a drill press you can tackle them yourself fairly easily. There will be surcharges for torsions sent up, buried in grease.
*Contact me about core refunds or multiple core credits.
-------------------------------------------------------------
My beams are built to order, to ensure you get exactly what your after. I have nothing in stock and ready to go, and normally have a que. Each beam is a 3-5 day turnaround, but depending on work load in the shop, it is typically several weeks. Please contact me about current turnaround times, as they vary!
Also, my beams come Raw to show workmanship and quality. They have a light clear coat to keep them from rusting before you get them. Nothing hidden underneath, you see what you get!
_________________ [email protected] is my contact email and quickest mode of contact. * Email me! *
I very rarely get a chance to stop and take calls, but I do check emails regularly and reply promptly!
If the ad says shipped, that price is within the continental US only. Please send a zip code or address for a total price elsewhere.
I've been doing nothing but Aircooled suspension, Fabrication and Restoration full time since '04!
***www.ValleyAutoWerks.com ***
|
Advertiser information |
Ad information |
Advertiser: Name: Member since: |
Slowlow Sam Manis II March 17, 2004 |
|
|
Location: Ad placed: Ad renewed: Ad last edited: Views: Category: Payments accepted: |
Gate City, Virginia, USA Map it Wed Dec 17, 2008 5:44 pm Wed Apr 10, 2024 8:27 am Sun May 28, 2023 12:06 pm 29690 Parts - Type 1/Bug - 1958-67
Cash Paypal Money order/Bank check
|
|
|
Watch this ad |
|
Watch this seller |
Share:
|
|
|
Other ads from Slowlow
See all | See ads in this category
|
Balljoint camber adjustment tools
|
Narrowed Linkpin & Balljoint Bus Beams 55-79
|
1" Narrowed IRS Trailing Arm Service.
|
Type I Conversion beam mounts. LP & BJ
|
Extended Springplates, Swingaxle Type I or III
|
|
|
|