SVDA Kadron Carbs, Turn-Key w/ warranty Price: $499
We are currently offering our complete TURN KEY sets of rebuilt/rebushed Kadron carburetors, already prepped for use with our without SVDA distributors. Bolt 'em on and GO! Each set is built and set up specifically for each individual customer.
These are only available periodically, and are on a first come, first served basis. Our rebuilt/re-bushed sets are only available when we have sufficient core carbs to supply them. We often run out of core carbs to build from, unfortunately.
Our "Basic" kit consists of:
- Two completely rebuilt carburetors with quality rebuild kits MADE IN USA, as featured in the JULY, 2011 issue of HOT VW'S Magazine.
- Re-bushed throttle bodies, better than new from the factory, using PTFE teflon-coated bronze bushings that are 10mm deep that should last FIVE times as long as the stock ones.
- Standard original Kadron-style linkage. Dual-cam style, heim-equipped MADE IN USA linkage (as pictured) is optional.
- SVDA vacuum ported carbs and throttle bodies.
- Restoration-quality polished exterior finish.
- All new stainless steel exterior screws and lock washers.
- Pre-adjusted and correctly shimmed accelerator pumps.
- Modified and tested accelerator pump discharge nozzles
- Primary and secondary pump check valves meticulously and repaired, as necessary
- Air correction jet properly sized.
- Emulsion tubes tested.
- All passages flow-tested.
- Needle and seats properly shimmed for correct float level setting
- Pre-jetted and set up for 1600 (custom jetting available for larger/smaller engines... see below) with stock pea-shooter exhaust at sea level
- 28mm venturis (custom sizes available for high altitude, or larger/smaller engines)
- Refurbished steel dual port manifolds (aluminum and single-port manifolds also available as an option) with our industry exclusive hi-temp powder-coating applied.
- New fiber intake gaskets, great for port work!
- New MADE IN USA stainless steel high quality hose clamps.
- New MADE IN USA fuel hose.
- New MADE IN USA balance tube hose.
- New brass fuel tee.
- New carburetor mounting studs and nuts.
- New chrome top air cleaner lids and metal base assemblies with all hardware.
- New re-useable gauze air cleaner elements.
- New EPDM rubber seals for air cleaner securing wingnuts, along with new cork base gaskets.
- Detailed instructions and videos available 24/7 as to how to make your dual carb conversion as simple and painless as humanly possible, and phone/email support if you need tech help.
THIS SET IS "TURN-KEY" -- You supply the labor, We supply everything else!!! Find out why everyone raves about our carbs for yourself.
Optional upgrades available to further customize your kit to make it just the right one for your particular engine. For more information regarding our various options, to price the kit you need, or to order online click here:
This is a really sweet set-up. Price out all these things individually when considering that cheap set of Kaddies. Throw in your time, gas, and all those trips to the store because you forgot something. Also consider the value of someone who knows what they're doing setting these up for you, and who gives you great service and support.
DON'S SPEND MORE THAN $100 ON A USED SET OF KADRONS IN UNKNOWN CONDITION.
You will likely have way more into them than you would if you purchased them from us first. Spend some time on our website, kadddieshack.com, and see how much information we've put together to help you be successful. Poke around the internet. Ask your friends and your local VW shop about us. We do what we do really well.
We offer a 90 day guarantee against any defects in the quality of the workmanship or materials. We take great pride in the work that's been put into these kits, and provide top notch support, as well as product that is unparalleled in the VW industry.
We also sell re-bushed throttle bodies, rebuilt Kadron (and other) carbs, Kadron replacement parts, SVDA distributors etc. We can also build your old Kaddies, or exchange them for rebuilts if you prefer. Drop us a note for a quote. We are the Kadron guys.
Kaddie Shack -- High quality parts for air-cooled VW's. -- COME VISIT OUR RETAIL STORE AT 1609 WALNUT ST. IN PASADENA! -- We carry a complete line of quality parts and back it up with great service and help.
Kaddie Shack 5 minute YouTube Tour:
Our phone# is 714-752-3766, email: [email protected].
Open M-F 10AM to 7PM
All of our Kadron carburetors and SVDA distributors come with a 90 day warranty & free tech service help. We want happy customers & repeat business. We specialize in Kadrons, & can rebuild, re-bush, and modify yours for use with any engine. They'll be BETTER THAN NEW when we're done with them.
Performance engines and front beams built to order - In-house dyno.