Parts/Accessories - 49-67 Bus

hazetguy · Posted: Fri Mar 26, 2004 10:24 pm Size: 640x480 Views: 966 Rating: Not rated

hazetguy
This is a pretty nice pair of original Bus headlights I cleaned up recently. Nothing has been repainted, and the only parts replaced were the bulbs and the rubber seal for the glass.

hazetguy · Posted: Fri Mar 26, 2004 10:23 pm Size: 640x480 Views: 784 Rating: Not rated

hazetguy
This is a pretty nice pair of original Bus headlights I cleaned up recently. Nothing has been repainted, and the only parts replaced were the bulbs and the rubber seal for the glass.

ratpanel61 · Posted: Fri Mar 26, 2004 4:38 pm Size: 1016x762 Views: 458 Rating: Not rated

ratpanel61
Here's the front adapter I made out of a spare beam. Weld some swivel castors to it and it works like a champ.

ratpanel61 · Posted: Fri Mar 26, 2004 4:36 pm Size: 1016x762 Views: 370 Rating: Not rated

ratpanel61
Got a spare crank assy laying around? Make a few of these. Bolt it all together without the case in the way and you have a REALLY sturdy jackstand that when you have 4 of them are all the same height.

Mango Juice · Posted: Thu Mar 25, 2004 1:20 pm Size: 640x480 Views: 290 Rating: Not rated

Mango Juice
Here is a RAREly seen item for the old Microbus....... DEANO EQUIPPED!!!!

NAES · Posted: Sun Mar 21, 2004 10:16 pm Size: 640x480 Views: 269 Rating: Not rated

NAES

NAES · Posted: Sun Mar 21, 2004 10:16 pm Size: 640x480 Views: 223 Rating: Not rated

NAES

NAES · Posted: Sun Mar 21, 2004 10:15 pm Size: 640x480 Views: 260 Rating: Not rated

NAES

staceyz · Posted: Sun Mar 21, 2004 8:48 pm Size: 640x480 Views: 882 Rating: Not rated

staceyz
Trying to remove the dang blang bolt, photo is for discussion on the forum. I'm sure the pin will be a bugger to get out once the round nuts are off...

staceyz · Posted: Sun Mar 21, 2004 8:47 pm Size: 640x480 Views: 908 Rating: Not rated

staceyz
Trying to remove the dang blang bolt, photo is for discussion on the forum. I'm sure the pin will be a bugger to get out once the 2 clips are off...

Nie zu alt · Posted: Sun Mar 21, 2004 4:23 pm Size: 576x384 Views: 2157 Rating: Not rated

Nie zu alt
Working on my extra beam. Took the spindles off today. Off they go to Rizzag! Hmmm.....maybe it's time to narrow this guy????

ratpanel61 · Posted: Sun Mar 21, 2004 12:38 pm Size: 1016x762 Views: 357 Rating: Not rated

ratpanel61
Take an old rusty beam, add some sqaure stock on the bottom with a couple of swivel castors and wala, you can move your bus in circles! It's not done yet, but you get the idea.

staceyz · Posted: Sat Mar 20, 2004 3:47 pm Size: 640x480 Views: 187 Rating: Not rated

staceyz

staceyz · Posted: Sat Mar 20, 2004 3:47 pm Size: 640x480 Views: 168 Rating: Not rated

staceyz

UZI · Posted: Thu Mar 18, 2004 1:39 pm Size: 560x420 Views: 499 Rating: Not rated

UZI
this one is off to santa barbara

ratpanel61 · Posted: Thu Mar 18, 2004 7:33 am Size: 1016x762 Views: 206 Rating: Not rated

ratpanel61
Here's another shot of the ambo fans that I'm rebuilding. They're starting to look pretty good. And they even work after the re-wiring job.

ratpanel61 · Posted: Thu Mar 18, 2004 7:31 am Size: 1016x762 Views: 124 Rating: Not rated

ratpanel61
Here's one side of the fans that I'm rebuilding. They've been blasted, re-wired and painted. I'll post more as they come along. I think they'll need new screws to make it look right though

BobDog · Posted: Wed Mar 17, 2004 7:13 pm Size: 320x240 Views: 329 Rating: Not rated

BobDog

NAES · Posted: Mon Mar 15, 2004 11:25 pm Size: 640x480 Views: 540 Rating: Not rated

NAES
Wasted powdercoat!

NAES · Posted: Mon Mar 15, 2004 11:24 pm Size: 640x480 Views: 330 Rating: Not rated

NAES
Wasting my powdercoat!

LHG · Posted: Sun Mar 14, 2004 8:29 pm Size: 700x486 Views: 437 Rating: Not rated

LHG
closeup of the hitch setup for a single wheel trailer.

ratpanel61 · Posted: Sat Mar 13, 2004 5:15 pm Size: 762x572 Views: 346 Rating: Not rated

ratpanel61
I made this bus tranny adapter today out of spare parts. Now I can move the rear around with the swivel castors with no suspension

TxPanzer · Posted: Thu Mar 11, 2004 9:05 am Size: 640x480 Views: 235 Rating: Not rated

TxPanzer

LHG · Posted: Wed Mar 10, 2004 5:34 pm Size: 819x423 Views: 386 Rating: Not rated

LHG
Had these made up today. Got the holes drilled to mount them under the bumper brakets on the bus, now I have to paint 'em. They are longer than the bracket underneath and I added a third hole. I'll fill the channel with wide washers to act as a spacer. I should be hauling a trailer in a few days.

LHG · Posted: Wed Mar 10, 2004 5:33 pm Size: 470x401 Views: 192 Rating: Not rated

LHG
Had these made up today. Got the holes drilled to mount them under the bumper brakets on the bus, now I have to paint 'em. They are longer than the bracket underneath and I added a third hole. I'll fill the channel with wide washers to act as a spacer. I should be hauling a trailer in a few days.

Long-roofs · Posted: Tue Mar 09, 2004 8:27 pm Size: 600x354 Views: 284 Rating: Not rated

Long-roofs
Heavy and ugly as hell.....

Long-roofs · Posted: Tue Mar 09, 2004 8:25 pm Size: 600x495 Views: 352 Rating: Not rated

Long-roofs
They came off a '62 single cab, the guy had them for decades.

Long-roofs · Posted: Tue Mar 09, 2004 8:23 pm Size: 600x271 Views: 255 Rating: Not rated

Long-roofs
The rear doesn't have the 'indent'....early???

TxPanzer · Posted: Tue Mar 09, 2004 1:52 pm Size: 640x480 Views: 218 Rating: Not rated

TxPanzer

UZI · Posted: Tue Mar 09, 2004 10:28 am Size: 560x420 Views: 296 Rating: Not rated

UZI
turkis middle seat. this one goes to arizona. off to the greyhound freight terminal

Miroan Werks · Posted: Mon Mar 08, 2004 10:54 am Size: 1000x667 Views: 446 Rating: Not rated

Miroan Werks
installed

truckersmike · Posted: Sun Mar 07, 2004 11:06 pm Size: 1000x667 Views: 411 Rating: Not rated

truckersmike
Fixing up the 1904 in the kitchen. Isn't that what it's supposed to be used for?

truckersmike · Posted: Sun Mar 07, 2004 11:04 pm Size: 1000x667 Views: 291 Rating: Not rated

truckersmike
Fixing up the 1904 in my kitchen.

merz356 · Posted: Sun Mar 07, 2004 10:28 am Size: 640x480 Views: 305 Rating: Not rated

merz356
NICE!

merz356 · Posted: Sun Mar 07, 2004 10:26 am Size: 640x480 Views: 483 Rating: Not rated

merz356
One way to fix your broken accelerator cable w/out ever removing it from the spoon

merz356 · Posted: Sun Mar 07, 2004 10:19 am Size: 640x480 Views: 415 Rating: Not rated

merz356
How NOT to fix your accelerator cable

PRIMER-LOOK · Posted: Sun Mar 07, 2004 8:57 am Size: 640x480 Views: 419 Rating: Not rated

PRIMER-LOOK
Started building my straight axles today. Axles are done next up......springplates. wanne see more check www.people.zeelandnet.nl/denest

Axle done

PRIMER-LOOK · Posted: Sun Mar 07, 2004 8:57 am Size: 640x480 Views: 301 Rating: Not rated

PRIMER-LOOK
Started building my straight axles today. Axles are done next up......springplates. wanne see more check www.people.zeelandnet.nl/denest

Rework inside

PRIMER-LOOK · Posted: Sun Mar 07, 2004 8:56 am Size: 640x480 Views: 283 Rating: Not rated

PRIMER-LOOK
Started building my straight axles today. Axles are done next up......springplates. wanne see more check www.people.zeelandnet.nl/denest

As they come of polish them up (put m back BEFORE you weld !!)

PRIMER-LOOK · Posted: Sun Mar 07, 2004 8:55 am Size: 640x480 Views: 219 Rating: Not rated

PRIMER-LOOK
Started building my straight axles today. Axles are done next up......springplates. wanne see more check www.people.zeelandnet.nl/denest

PRIMER-LOOK · Posted: Sun Mar 07, 2004 8:54 am Size: 640x480 Views: 292 Rating: Not rated

PRIMER-LOOK
Started building my straight axles today. Axles are done next up......springplates.

Mr. Twisted · Posted: Sun Mar 07, 2004 7:18 am Size: 364x273 Views: 477 Rating: Not rated

Mr. Twisted

Mr. Twisted · Posted: Sun Mar 07, 2004 6:47 am Size: 1012x759 Views: 156 Rating: Not rated

Mr. Twisted
adaptation for carb pre-heat hose.

Mr. Twisted · Posted: Sun Mar 07, 2004 6:45 am Size: 1012x759 Views: 180 Rating: Not rated

Mr. Twisted
Adapted to take the pre-heater hose

j manshande · Posted: Sun Mar 07, 2004 12:41 am Size: 640x480 Views: 285 Rating: Not rated

j manshande
just going for a ride on a sunny afternoon with my new beetle flower vase on the splitscreeen

autohaus · Posted: Sat Mar 06, 2004 1:14 pm Size: 640x480 Views: 450 Rating: Not rated

autohaus
i like this bumper

Johnzie333 · Posted: Sat Mar 06, 2004 7:49 am Size: 640x480 Views: 335 Rating: Not rated

Johnzie333
Look at this old muffler!

Lind · Posted: Sat Mar 06, 2004 12:52 am Size: 500x346 Views: 255 Rating: Not rated

Lind

EverettB · Posted: Fri Mar 05, 2004 11:19 pm Size: 640x480 Views: 374 Rating: Not rated

EverettB
Center brakelight image from my '54 Single Cab

hippyhappy2 · Posted: Thu Mar 04, 2004 7:07 pm Size: 480x640 Views: 201 Rating: Not rated

hippyhappy2
on a crew cab


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

Jump to:

You cannot upload new pics in this category You cannot rate pics in this category You cannot edit your pics and comments in this category You cannot delete your pics and comments in this category