| Category :: Parts/Accessories - Type 3 |
|
|
|
|
|
|
|
|
Posted: Tue Apr 20, 2021 11:33 am
Size: 997x412 Views: 1
Rating: Not rated
|
Heater vent flap bracket for heater channels 311255593
Ceckert64
Part number 311 255 593
View other images:
From Ceckert64  
Search Forums for photo
|
|
|
|
|
|
|
|
|
Posted: Thu Apr 15, 2021 2:16 pm
Size: 1200x1600 Views: 7
Rating: Not rated
|
The last of TRW Steering Boxes
OKType3Tim
TRW Steering Boxers are now, (04/2021) not in production. And the prices prove it.
View other images:
From OKType3Tim
Search Forums for photo
|
|
|
Posted: Tue Apr 13, 2021 4:45 pm
Size: 640x427 Views: 3
Rating: Not rated
|
1969 automatic Notchback front end photo
EverettB
For Forums reference
View other images:
From EverettB
Search Forums for photo
|
|
|
|
|
Posted: Sun Apr 11, 2021 6:41 am
Size: 1080x810 Views: 1
Rating: Not rated
|
Seat Covering Pulling Away From Side Lifter/Handle
knewknew
Is it possibly to pry off the cover and tuck the cover back behind the lever?
View other images:
From knewknew
Search Forums for photo
|
|
|
|
|
Posted: Thu Apr 08, 2021 3:54 am
Size: 1600x1200 Views: 5
Rating: Not rated
|
DA6 heater
Kdj
DA6
View other images:
From Kdj
Search Forums for photo
|
|
|
Posted: Thu Apr 08, 2021 3:54 am
Size: 1200x1600 Views: 2
Rating: Not rated
|
DA6 heater
Kdj
DA6
View other images:
From Kdj
Search Forums for photo
|
|
|
Posted: Thu Apr 08, 2021 3:54 am
Size: 1200x1600 Views: 1
Rating: Not rated
|
DA6 heater
Kdj
DA6
View other images:
From Kdj
Search Forums for photo
|
|
|
Posted: Tue Apr 06, 2021 10:57 am
Size: 1080x1440 Views: 10
Rating: Not rated
|
Seatbelt Bolt Sizes
knewknew
Trying to determine the replacement size for the seatbelt hardware used in a Type 3.
View other images:
From knewknew
Search Forums for photo
|
|
|
Posted: Sun Apr 04, 2021 9:43 pm
Size: 1200x1600 Views: 4
Rating: Not rated
|
Missing screw/bolt - fan shroud
KROFTMAN
Type 3 fan shroud flap actuator rod mounting bracket. Missing bolt/screw
View other images:
From KROFTMAN
Search Forums for photo
|
|
|
|
|
Posted: Sun Apr 04, 2021 9:38 am
Size: 913x1059 Views: 0
Rating: Not rated
|
Splined wiper shafts
Max Welton
This is going on my 67. I fitted up later splined shafts.
I assume there is a rubber seal between the washer and the paint?
View other images:
From Max Welton
Search Forums for photo
|
|
|
Posted: Sun Apr 04, 2021 8:05 am
Size: 1600x900 Views: 4
Rating: Not rated
|
311 705 689 Thrust ring for sub-frame mounting, rear
ataraxia
Picture of where the part is located on the car
View other images:
From ataraxia
Search Forums for photo
|
|
|
Posted: Sat Apr 03, 2021 1:18 pm
Size: 1080x810 Views: 7
Rating: Not rated
|
Unfinished Full Size Roof Rack
knewknew
Currently unpainted with no wood. A little banged up and rusty from rough shipment. Should be ok with some TLC.
View other images:
From knewknew
Search Forums for photo
|
|
|
Posted: Sat Apr 03, 2021 9:50 am
Size: 1024x266 Views: 1
Rating: Not rated
|
T3 & T34 Steering Shaft Resto
notchboy
Was bored yesterday and decided to clean some rusty parts. I also wanted to see the difference first hand between the two shafts. As you can see the longer one is for a T34 due to its seating angle and sloped down and back dash position.
View other images:
From notchboy
Search Forums for photo
|
|
|
Posted: Sat Apr 03, 2021 9:50 am
Size: 1024x768 Views: 1
Rating: Not rated
|
T3 & T34 Steering Shaft Resto
notchboy
Was bored yesterday and decided to clean some rusty parts. I also wanted to see the difference first hand between the two shafts. As you can see the longer one is for a T34 due to its seating angle and sloped down and back dash position.
View other images:
From notchboy
Search Forums for photo
|
|
|
Posted: Sat Apr 03, 2021 9:50 am
Size: 1024x768 Views: 1
Rating: Not rated
|
T3 & T34 Steering Shaft Resto
notchboy
Was bored yesterday and decided to clean some rusty parts. I also wanted to see the difference first hand between the two shafts. As you can see the longer one is for a T34 due to its seating angle and sloped down and back dash position.
View other images:
From notchboy
Search Forums for photo
|
|
|
Posted: Sat Apr 03, 2021 9:50 am
Size: 1024x590 Views: 1
Rating: Not rated
|
T3 & T34 Steering Shaft Resto
notchboy
Was bored yesterday and decided to clean some rusty parts. I also wanted to see the difference first hand between the two shafts. As you can see the longer one is for a T34 due to its seating angle and sloped down and back dash position.
View other images:
From notchboy
Search Forums for photo
|
|
|
Posted: Sat Apr 03, 2021 9:50 am
Size: 1024x595 Views: 1
Rating: Not rated
|
T3 & T34 Steering Shaft Resto
notchboy
Was bored yesterday and decided to clean some rusty parts. I also wanted to see the difference first hand between the two shafts. As you can see the longer one is for a T34 due to its seating angle and sloped down and back dash position.
View other images:
From notchboy
Search Forums for photo
|
|
|
Posted: Sat Apr 03, 2021 9:50 am
Size: 1024x768 Views: 2
Rating: Not rated
|
T3 & T34 Steering Shaft Resto
notchboy
Was bored yesterday and decided to clean some rusty parts. I also wanted to see the difference first hand between the two shafts. As you can see the longer one is for a T34 due to its seating angle and sloped down and back dash position.
View other images:
From notchboy
Search Forums for photo
|
|
|
Posted: Sat Apr 03, 2021 9:50 am
Size: 1024x768 Views: 3
Rating: Not rated
|
T3 & T34 Steering Shaft Resto
notchboy
Was bored yesterday and decided to clean some rusty parts. I also wanted to see the difference first hand between the two shafts. As you can see the longer one is for a T34 due to its seating angle and sloped down and back dash position.
View other images:
From notchboy
Search Forums for photo
|
|
|
Posted: Sat Apr 03, 2021 9:50 am
Size: 1024x301 Views: 1
Rating: Not rated
|
T3 & T34 Steering Shaft Resto
notchboy
Was bored yesterday and decided to clean some rusty parts. I also wanted to see the difference first hand between the two shafts. As you can see the longer one is for a T34 due to its seating angle and sloped down and back dash position.
View other images:
From notchboy
Search Forums for photo
|
|
|
Posted: Sat Apr 03, 2021 9:50 am
Size: 1024x518 Views: 1
Rating: Not rated
|
T3 & T34 Steering Shaft Resto
notchboy
Was bored yesterday and decided to clean some rusty parts. I also wanted to see the difference first hand between the two shafts. As you can see the longer one is for a T34 due to its seating angle and sloped down and back dash position.
View other images:
From notchboy
Search Forums for photo
|
|
|
Posted: Sat Apr 03, 2021 9:50 am
Size: 1600x1200 Views: 2
Rating: Not rated
|
T3 & T34 Steering Shaft Resto
notchboy
Was bored yesterday and decided to clean some rusty parts. I also wanted to see the difference first hand between the two shafts. As you can see the longer one is for a T34 due to its seating angle and sloped down and back dash position.
View other images:
From notchboy
Search Forums for photo
|
|
|
Posted: Sat Apr 03, 2021 9:50 am
Size: 1600x1200 Views: 2
Rating: Not rated
|
T3 & T34 Steering Shaft Resto
notchboy
Was bored yesterday and decided to clean some rusty parts. I also wanted to see the difference first hand between the two shafts. As you can see the longer one is for a T34 due to its seating angle and sloped down and back dash position.
View other images:
From notchboy
Search Forums for photo
|
|
|
|
|
|
|
Posted: Mon Mar 29, 2021 10:21 am
Size: 1440x1080 Views: 8
Rating: Not rated
|
New Door Seals - German Made
knewknew
Newly Installed Door Seals - Doors unfortunately now have gap. Wondering if the rubber will compress over time or if I should shave it down near the hinge area.
View other images:
From knewknew
Search Forums for photo
|
|
|
Posted: Mon Mar 29, 2021 10:21 am
Size: 1440x1080 Views: 5
Rating: Not rated
|
New Door Seals - German Made
knewknew
Newly Installed Door Seals - Doors unfortunately now have gap. Wondering if the rubber will compress over time or if I should shave it down near the hinge area.
View other images:
From knewknew
Search Forums for photo
|
|
|
Posted: Sun Mar 28, 2021 6:56 am
Size: 1440x1080 Views: 14
Rating: Not rated
|
Vacuum not noticeable on advance...
knewknew
Having a hard time finding signs of a vacuum on the advance. Im not sure how much pressure/pull I should be feeling.
View other images:
From knewknew
Search Forums for photo
|
|
|
Posted: Sun Mar 28, 2021 6:56 am
Size: 1440x1080 Views: 8
Rating: Not rated
|
Vacuum not noticeable on advance...
knewknew
Having a hard time finding signs of a vacuum on the advance. Im not sure how much pressure/pull I should be feeling.
View other images:
From knewknew
Search Forums for photo
|
|
|
|
|
|
|
|
|
Posted: Thu Mar 11, 2021 2:09 pm
Size: 1080x1440 Views: 9
Rating: Not rated
|
Seat Belt Hardware Question
knewknew
Trying to figure out where these large washers go and if I have my seatbelts attached correctly.
View other images:
From knewknew
Search Forums for photo
|
|
|
Posted: Thu Mar 11, 2021 2:09 pm
Size: 1440x1080 Views: 6
Rating: Not rated
|
Seat Belt Hardware Question
knewknew
Trying to figure out where these large washers go and if I have my seatbelts attached correctly.
View other images:
From knewknew
Search Forums for photo
|
|
|
|
|
Posted: Wed Mar 10, 2021 2:17 pm
Size: 1066x800 Views: 28
Rating: Not rated
|
late type 3 oil bath oil cleaner
pitargue
originally from car-from-uk.com. (See watermark on pic)
View other images:
From pitargue
Search Forums for photo
|
|
|
|
|
|
|
Posted: Fri Mar 05, 2021 10:00 am
Size: 1600x1200 Views: 22
Rating: Not rated
|
Fixture to mount Type 3 fan to mill
OKType3Tim
Building up a fixture to mount a Type 3 fan to my mill.
For the purpose of turning the oil return rings off the fan hub; so that a "sand seal" can be used on the engine build.
View other images:
From OKType3Tim
Search Forums for photo
|
|
|
Posted: Fri Mar 05, 2021 9:44 am
Size: 1600x848 Views: 26
Rating: Not rated
|
Fixture to mount Type 3 fan to mill
OKType3Tim
Building up a fixture to mount a Type 3 fan to my mill.
For the purpose of turning the oil return rings off the fan hub; so that a "sand seal" can be used on the engine build.
View other images:
From OKType3Tim
Search Forums for photo
|
|
|
