Tcash Samba Member
Joined: July 20, 2011 Photos: 9014 Location: San Jose, California, USA
|
1968-72 Steering Box Replacement |
Posted: Wed Jul 18, 2018 11:05 am Views: 39
Rating: Not rated
|
|
34. Use the bolt as a visual aid to check alignment.
Slide the Flange down and use the Alignment tool or (#3 screwdriver) to align the hole. Followed by the bolt.
CAUTION the bolt must go in by hand or Damage to the Worm drive splines and or the bolt will occur.
NO hammering no Screwing it in with a socket. Have some patients here. You will find that aligned spot where the bolt just slides in. |
|