Tcash
Samba Member
Joined: July 20, 2011
Photos: 9014
Location: San Jose, California, USA
|
| 1968-72 Steering Box Replacement |
Posted: Wed Jul 18, 2018 11:20 am Views: 73
Rating: 1
|
|
3. Jack up one side of the vehicle and place a jack stand under the front Beam on that side. Note: the jack stands are placed inward slightly to miss the grease fittings located on the back of the Beam. Lower the jack slightly, to put the weight of the vehicle on the jack stand. Now shake the vehicle, to be sure it is secure on the jack stand. Move to the other side and repeat the procedure.
42. While you have the grease gun out give the five grease fittings on the front Beam a few pumps. Remember I said to note where the jack stand was.
[img]https://www.thesamba.com/vw/archives/manuals/71bus/page52.jpg[/img]
Remove the jack stands in the reverse order of #3. |
|
