Alex1976 Samba Member
Joined: April 11, 2005 Photos: 216 Location: Atascocita, TX
|
1966 Bus Passenger Door Pin Hinge Removal |
Posted: Wed Feb 20, 2019 6:05 pm Views: 30
Rating: Not rated
|
|
The door pin on the passenger door was stuck pretty good so I had to improvise to get it out. Luckily, there was about 1/4 inch of the pin sticking out. I welded a steel bar on top to get it moving with some leverage and lube, then made an improvised bolt puller with two old nuts, a bolt, and a clamp. Worked well enough to get it 3/4 the way out, then hammered it out the rest of the way with a screwdriver and hammer. Turns out it was a long bolt just jammed in there. :D |
|