Bajaman65
Samba Member
Joined: January 16, 2007
Photos: 31
Location: Borrego Springs
|
| Home Made Jet Doctor |
Posted: Fri Feb 26, 2010 5:49 am Views: 104
Rating: Not rated
|
|
| I just take 3 peices of brass tube .187, .156 and .125 cut the two bigger ones about 5/16 long, I then de-bur them and slipe them into each other. Slip the 1/8" tube about 2" long into the base unit and solder then together. Make sure you cut a 1/16" slot in the bottom for the air to get through. I put an o-ring over the 1/8" tube,. Sand the big end to make it fit into the Carb top. Don't forget to drill a hole in your Air Cleaner base for the tubes to stick through. |
|
