lastchancevw Samba Member
Joined: August 26, 2008 Photos: 225 Location: Southeastern Mass
|
Early Bay Bus tachometer DIY |
Posted: Mon Sep 19, 2011 12:58 am Views: 129
Rating: Not rated
|
|
Pasted on.. It was just a teeny bit smaler than the face, so I outlined it all with a sharpie. When I re-installed this on the tach, I found that the best way to slip it around the needle was to get a bobby pin under the needle and pry it ever so slightly up so that I could slip the face back in.. Then I screwed it back down with it's 2 screws. I tweaked some adjsutment so that 0 read 0. I don't expect this tach to be super-accurate. |
|