| Search Results |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Thu Jul 09, 2015 7:41 pm
Size: 1600x1200 Views: 411
Rating: Not rated
|
Neiman steering lock column
billmetric
here is a column lock hole for an oval window Neiman lock, the topmost part of the hole is 160mm down from the top edge of the column, the hole is approximately 15mm wide by 25mm high, the hole is very nearly centered in the same line as the horn brush mount, the hole probably had more rounded edges and can be made larger than pictured but this was the smallest amount of material I could remove and make the lock functional
View other images:
From billmetric  
In Parts/Accessories - Bug
Search Forums for photo
|
|
|
Posted: Thu Jul 09, 2015 7:41 pm
Size: 1600x1200 Views: 114
Rating: Not rated
|
Neiman steering lock column
billmetric
here is a column lock hole for an oval window Neiman lock, the topmost part of the hole is 160mm down from the top edge of the column, the hole is approximately 15mm wide by 25mm high, the hole is very nearly centered in the same line as the horn brush mount, the hole probably had more rounded edges and can be made larger than pictured but this was the smallest amount of material I could remove and make the lock functional
View other images:
From billmetric
In Parts/Accessories - Bug
Search Forums for photo
|
|
|
Posted: Tue Jun 23, 2015 2:40 pm
Size: 1600x1200 Views: 82
Rating: Not rated
|
BIKE AND LUGGAGE RACK
billmetric
MADE A NEW LUGGAGE RACK THAT ALSO CARRYS ONE OR TWO BIKES, ALSO FOLDS DOWN TO STOW FLAT IN THE TRUNK AND ADDED HOLES FOR A LICENSE PLATE MOUNT IN CASE THE LOCAL POLICE ARE LOOKING FOR REASONS TO PULL ME OVER (THE BIKE DOES A PRETTY GOOD JOB OF BLOCKING THE PLATE WHICH IS TECHNICALLY ILLEGAL)
View other images:
From billmetric
In Parts/Accessories - Bug
Search Forums for photo
|
|
|
Posted: Tue Jun 23, 2015 2:40 pm
Size: 1600x1200 Views: 88
Rating: Not rated
|
BIKE AND LUGGAGE RACK
billmetric
MADE A NEW LUGGAGE RACK THAT ALSO CARRYS ONE OR TWO BIKES, ALSO FOLDS DOWN TO STOW FLAT IN THE TRUNK AND ADDED HOLES FOR A LICENSE PLATE MOUNT IN CASE THE LOCAL POLICE ARE LOOKING FOR REASONS TO PULL ME OVER (THE BIKE DOES A PRETTY GOOD JOB OF BLOCKING THE PLATE WHICH IS TECHNICALLY ILLEGAL)
View other images:
From billmetric
In Parts/Accessories - Bug
Search Forums for photo
|
|
|
Posted: Tue Jun 23, 2015 2:40 pm
Size: 1600x1200 Views: 69
Rating: Not rated
|
BIKE AND LUGGAGE RACK
billmetric
MADE A NEW LUGGAGE RACK THAT ALSO CARRYS ONE OR TWO BIKES, ALSO FOLDS DOWN TO STOW FLAT IN THE TRUNK AND ADDED HOLES FOR A LICENSE PLATE MOUNT IN CASE THE LOCAL POLICE ARE LOOKING FOR REASONS TO PULL ME OVER (THE BIKE DOES A PRETTY GOOD JOB OF BLOCKING THE PLATE WHICH IS TECHNICALLY ILLEGAL)
View other images:
From billmetric
In Parts/Accessories - Bug
Search Forums for photo
|
|
|
Posted: Tue Jun 23, 2015 2:39 pm
Size: 1600x1200 Views: 42
Rating: Not rated
|
BIKE AND LUGGAGE RACK
billmetric
MADE A NEW LUGGAGE RACK THAT ALSO CARRYS ONE OR TWO BIKES, ALSO FOLDS DOWN TO STOW FLAT IN THE TRUNK AND ADDED HOLES FOR A LICENSE PLATE MOUNT IN CASE THE LOCAL POLICE ARE LOOKING FOR REASONS TO PULL ME OVER (THE BIKE DOES A PRETTY GOOD JOB OF BLOCKING THE PLATE WHICH IS TECHNICALLY ILLEGAL)
View other images:
From billmetric
In Parts/Accessories - Bug
Search Forums for photo
|
|
|
Posted: Tue Jun 23, 2015 2:39 pm
Size: 1600x1200 Views: 19
Rating: Not rated
|
BIKE AND LUGGAGE RACK
billmetric
MADE A NEW LUGGAGE RACK THAT ALSO CARRYS ONE OR TWO BIKES, ALSO FOLDS DOWN TO STOW FLAT IN THE TRUNK AND ADDED HOLES FOR A LICENSE PLATE MOUNT IN CASE THE LOCAL POLICE ARE LOOKING FOR REASONS TO PULL ME OVER (THE BIKE DOES A PRETTY GOOD JOB OF BLOCKING THE PLATE WHICH IS TECHNICALLY ILLEGAL)
View other images:
From billmetric
In Parts/Accessories - Bug
Search Forums for photo
|
|
|
Posted: Tue Jun 23, 2015 2:39 pm
Size: 1600x1200 Views: 76
Rating: Not rated
|
BIKE AND LUGGAGE RACK
billmetric
MADE A NEW LUGGAGE RACK THAT ALSO CARRYS ONE OR TWO BIKES, ALSO FOLDS DOWN TO STOW FLAT IN THE TRUNK AND ADDED HOLES FOR A LICENSE PLATE MOUNT IN CASE THE LOCAL POLICE ARE LOOKING FOR REASONS TO PULL ME OVER (THE BIKE DOES A PRETTY GOOD JOB OF BLOCKING THE PLATE WHICH IS TECHNICALLY ILLEGAL)
View other images:
From billmetric
In Parts/Accessories - Bug
Search Forums for photo
|
|
|
Posted: Tue Jun 23, 2015 2:39 pm
Size: 1600x1200 Views: 67
Rating: Not rated
|
BIKE AND LUGGAGE RACK
billmetric
MADE A NEW LUGGAGE RACK THAT ALSO CARRYS ONE OR TWO BIKES, ALSO FOLDS DOWN TO STOW FLAT IN THE TRUNK AND ADDED HOLES FOR A LICENSE PLATE MOUNT IN CASE THE LOCAL POLICE ARE LOOKING FOR REASONS TO PULL ME OVER (THE BIKE DOES A PRETTY GOOD JOB OF BLOCKING THE PLATE WHICH IS TECHNICALLY ILLEGAL)
View other images:
From billmetric
In Parts/Accessories - Bug
Search Forums for photo
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Thu Feb 20, 2014 10:52 pm
Size: 1122x463 Views: 181
Rating: Not rated
|
split window lug bolt comparison
billmetric
split window lug bolts, both flat top and dished type lug bolts were produced by different suppliers marked with the vw split part number "68.02" any 9 digit part number lug bolts are later replacements
View other images:
From billmetric
In Bug - Split-window/1938-53 VWs
Search Forums for photo
|
|
|
|
|
|
|
|
|
|
|
Posted: Fri Jun 21, 2013 2:14 pm
Size: 1600x1200 Views: 81
Rating: Not rated
|
split bus bumper repair
billmetric
I would like to thank the Californians who in their infinate wizdumb dechromed, de-overrider'd and hacked a giant rectangle section out of the bottom of my deluxe '63 rear slash bumper so they could run a sweet Beetle muffler back in the 1970s I'm guessing. I finally found some 2mm patch panel and a 12 ton press to repair and straighten the bumper, getting hard to find good solid slash bumpers
View other images:
From billmetric
In Parts/Accessories - 49-67 Bus
Search Forums for photo
|
|
|
Posted: Fri Jun 21, 2013 1:34 pm
Size: 1200x1600 Views: 90
Rating: Not rated
|
split bus bumper repair
billmetric
I would like to thank the Californians who in their infinate wizdumb dechromed, de-overrider'd and hacked a giant rectangle section out of the bottom of my deluxe '63 rear slash bumper so they could run a sweet Beetle muffler back in the 1970s I'm guessing. I finally found some 2mm patch panel and a 12 ton press to repair and straighten the bumper, getting hard to find good solid slash bumpers
View other images:
From billmetric
In Parts/Accessories - 49-67 Bus
Search Forums for photo
|
|
|
Posted: Fri Jun 21, 2013 1:34 pm
Size: 1200x1600 Views: 63
Rating: Not rated
|
split bus bumper repair
billmetric
I would like to thank the Californians who in their infinate wizdumb dechromed, de-overrider'd and hacked a giant rectangle section out of the bottom of my deluxe '63 rear slash bumper so they could run a sweet Beetle muffler back in the 1970s I'm guessing. I finally found some 2mm patch panel and a 12 ton press to repair and straighten the bumper, getting hard to find good solid slash bumpers
View other images:
From billmetric
In Parts/Accessories - 49-67 Bus
Search Forums for photo
|
|
|
Posted: Fri Jun 21, 2013 1:34 pm
Size: 1600x1200 Views: 69
Rating: Not rated
|
split bus bumper repair
billmetric
I would like to thank the Californians who in their infinate wizdumb dechromed, de-overrider'd and hacked a giant rectangle section out of the bottom of my deluxe '63 rear slash bumper so they could run a sweet Beetle muffler back in the 1970s I'm guessing. I finally found some 2mm patch panel and a 12 ton press to repair and straighten the bumper, getting hard to find good solid slash bumpers
View other images:
From billmetric
In Parts/Accessories - 49-67 Bus
Search Forums for photo
|
|
|
Posted: Fri Jun 21, 2013 1:34 pm
Size: 1600x1200 Views: 44
Rating: Not rated
|
split bus bumper repair
billmetric
I would like to thank the Californians who in their infinate wizdumb dechromed, de-overrider'd and hacked a giant rectangle section out of the bottom of my deluxe '63 rear slash bumper so they could run a sweet Beetle muffler back in the 1970s I'm guessing. I finally found some 2mm patch panel and a 12 ton press to repair and straighten the bumper, getting hard to find good solid slash bumpers
View other images:
From billmetric
In Parts/Accessories - 49-67 Bus
Search Forums for photo
|
|
|
Posted: Fri Jun 21, 2013 1:33 pm
Size: 1600x1200 Views: 56
Rating: Not rated
|
split bus bumper repair
billmetric
I would like to thank the Californians who in their infinate wizdumb dechromed, de-overrider'd and hacked a giant rectangle section out of the bottom of my deluxe '63 rear slash bumper so they could run a sweet Beetle muffler back in the 1970s I'm guessing. I finally found some 2mm patch panel and a 12 ton press to repair and straighten the bumper, getting hard to find good solid slash bumpers
View other images:
From billmetric
In Parts/Accessories - 49-67 Bus
Search Forums for photo
|
|
|
Posted: Fri Jun 21, 2013 1:33 pm
Size: 1600x1200 Views: 67
Rating: Not rated
|
split bus bumper repair
billmetric
I would like to thank the Californians who in their infinate wizdumb dechromed, de-overrider'd and hacked a giant rectangle section out of the bottom of my deluxe '63 rear slash bumper so they could run a sweet Beetle muffler back in the 1970s I'm guessing. I finally found some 2mm patch panel and a 12 ton press to repair and straighten the bumper, getting hard to find good solid slash bumpers
View other images:
From billmetric
In Parts/Accessories - 49-67 Bus
Search Forums for photo
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
