| BugMeister69' |
Tue Aug 05, 2003 11:16 am |
|
| I have an adjustable front end but I dont know how to adjust it,I have a 69 hard top.can someone tell me how to raise it about an inch because its really low and sometimes my tire rubs my fender?maybe a website has the information, but could someone help me? |
|
| Steve. |
Tue Aug 05, 2003 11:51 am |
|
| Idont know, I pulled out the the two bolts completely, but I'm running 125's no rubbing! sorry |
|
| Steve. |
Tue Aug 05, 2003 11:51 am |
|
| I dont know, I pulled out the the two bolts completely, but I'm running 125's no rubbing! sorry |
|
| Steve. |
Tue Aug 05, 2003 11:52 am |
|
| Oops! |
|
| FunkFlex61 |
Tue Aug 05, 2003 6:31 pm |
|
| I usually just jack up the front of the car, loosen the two bolts,the lower the jack down to where u want it to be then get back under and tighten up the bolts. They have to be cranked down or they wont hold. |
|
| nobugJay |
Tue Aug 05, 2003 6:56 pm |
|
| My 67 had the adjusters welded in wrong, where it wasn't driveable even with it raised all the way up. So, I had to drill out the slot to be able to raise the adjuster more and get it off the ground. |
|
| DubStyle |
Wed Aug 06, 2003 4:02 am |
|
1) Jack the front end up till the tires are off the ground.
2) Loosen the bolts that keep the adjuster in place
3) Let the tires fall how ever high you want to raise it. (Using the jack to control this helps)
4) Tighten the bolts as much as you can.
5) Drop it back to the ground remove the jack and test drive it.
Not sure how much raising you Bug will change Alignment so make sure you are good to go. |
|
Powered by phpBB © 2001, 2005 phpBB Group
|